| MazdaSpeed 3/6 - ECU Computer Tuning Have an ECU tuning issue? Do you want to discuss Mazdaspeed 3/6 tuning solutions? Up to date info on the latest! Piasini Reflash, Cobb Access Port, Xede, Procede, Standback, Superchips & others supported here! | 
07-02-2008, 04:50 PM
|
#1 | | Alittle Faster
Join Date: May 2008 Location: Cape Coral, FL
Posts: 492
Casino cash: $95612510
Thanks: 3
Thanked 42 Times in 32 Posts
Groans: 0
Groaned at 0 Times in 0 Posts
|  OBDII CONNECTORS
Anyone try an OBDII "Y" connector to use 2 devices at the same time for readings? Can it be doable? OR will the readings be misread by two sources drawing power for the readings?
Example:
COBB AP and DashHawk  | 
|  | |
07-02-2008, 06:43 PM
|
#2 | | Senior Member
Join Date: Mar 2008
Posts: 127
Casino cash: $95588065
Thanks: 81
Thanked 19 Times in 13 Posts
Groans: 3
Groaned at 0 Times in 0 Posts
|
Unfortunately, No. Something about them having the same address/code causes them to interfere with each other. Otherwise I would be rocking the dashhawk and AP Combo. | |
| | |
07-02-2008, 07:01 PM
|
#3 | | Alittle Faster
Join Date: May 2008 Location: Cape Coral, FL
Posts: 492
Casino cash: $95612510
Thanks: 3
Thanked 42 Times in 32 Posts
Groans: 0
Groaned at 0 Times in 0 Posts
|
Originally Posted by MidwestSpeed3  Unfortunately, No. Something about them having the same address/code causes them to interfere with each other. Otherwise I would be rocking the dashhawk and AP Combo. Where did you get this info? I would like to read up on it. TIA! | |
| | |
07-04-2008, 06:32 PM
|
#4 | | Super Moderator
Join Date: Jun 2008
Posts: 195
Casino cash: $32344259
Thanks: 15
Thanked 11 Times in 9 Posts
Groans: 10
Groaned at 2 Times in 2 Posts
|
DashHawk Vehicle Information Display
check out their tech forums.. there is a post stating the exact same thing.. | |
| | |
07-04-2008, 08:51 PM
|
#5 | | Alittle Faster
Join Date: May 2008 Location: Cape Coral, FL
Posts: 492
Casino cash: $95612510
Thanks: 3
Thanked 42 Times in 32 Posts
Groans: 0
Groaned at 0 Times in 0 Posts
|
Originally Posted by Doc Thanks, after an hour of searching and weeding thru the crap lol.
They don't say anything about the COBB AP, but they do say ID's conflicting with only two other types of scanners/readers on the OBDII port. I will try it with the COBB and see what happens.
If that doesn't work, I will use the power mod for the DASHHAWK.
Putting an on/off switch on line #1 of the DASHHAWK cable. Atleast that way I don't have to keep unplugging them to use either one. 
Or a three way switch to power one or the other. | |
| | |
07-10-2008, 03:27 PM
|
#6 | | Alittle Faster
Join Date: May 2008 Location: Cape Coral, FL
Posts: 492
Casino cash: $95612510
Thanks: 3
Thanked 42 Times in 32 Posts
Groans: 0
Groaned at 0 Times in 0 Posts
|
FYI:
Ok, tested the OBDII "Y" Cable with COBB AP and MSD DASHHAWK:
DH overrides the AP connection no matter which one goes on first or the same time.
AP will work if DH is unplugged or not in a reading state. If the DH is in menu, setup, etc then the AP will work. Other than that the DH has the primary control and AP is in an error or searching state.
So making a pin #1 toggle switch in the DH cable will be needed or not depending how you want to do it. | |
| | |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | | |  (View-All)
Members who have read this thread : 64
| | 2008MS3, 94jedi, acidbbg, arkenzo, bani, bioevolve, bmman93, Boosted333, Boother, borderline, Breakdown81, clos561, corsa, Cosmic3MPS, danems6, dkswim, Doc, dread, evidence, FADE2GRY, FastAttack, Fobio, FORZDA 1, freeflyfreak, Haltech, IDRVSLO, javanc, JayFarm, Jengajoe, johnnycake, jolengy, kingpin748, ktan91, labikesrcool, LBV, lenny127, MadOzodi, Meder, MidwestSpeed3, mordant80, ms3boost, neikz, nocuous, Oldcabin, phillyb, Raglem, red07, redrocketz, redspeed, saitek, Shanems3, SharkDiver, shock6, smakdown61, SpdFreak, subparpunk03, sweetpickles, TheDoc, Torch, udontknowjack, Veet Voojagig, xSP33Dx3x, ztuner | | Thread Tools | | | | Display Modes |  Linear Mode | 
Posting Rules
| You may not post new threads You may not post replies You may not post attachments You may not edit your posts
HTML code is Off | | | All times are GMT -7. The time now is 09:37 AM. |
