Mazdaspeed 3 2009 - need help fixing issues - fully built engine

[Constantin]

Originally Posted by S3BAZ1091 so i spoke to adam today, he said he did a GT3076R turbo. did a full engine. with CPE heads and isdrium rods or something like that, he told me that japtrix tunned the car when the first engine blew. he then took it to VF who built the engine and the engine was put in at the mazda dealer with felipe. the rest the car had already. so tomorrow im going to check for any leaks on the car and check what else we can find.

In other words Adam can't just email you the detailed list of part that that were installed in the car??? How hard can it be...It seems like he has very little clue as well...

At least now we know you have CP-E heads...

Start making a detailed parts list now... we'll update tomorrow...

[Alejo_NIN]

Originally Posted by S3BAZ1091 also he mentioned he did a street tune with cliton. so the car was never dyno tuned.

dyno tune is for numbers, street tune is for drivability.AFAIK

but still, you car runs like shit cuz it was probably abused as fuck...
watch this:
@1:07 you car is kicking an Evo's ass....

Street Racing Diaries - S01E01 RadonElement.com - YouTube

Street Racing Diaries - S01E01 RadonElement.com - YouTube

[Pintozoz]

But then he lost

[Constantin]

Originally Posted by Alejo_NIN dyno tune is for numbers, street tune is for drivability.AFAIK but still, you car runs like shit cuz it was probably abused as fuck... watch this: @1:07 you car is kicking an Evo's ass.... Street Racing Diaries - S01E01 RadonElement.com - YouTube

Is that what is going on on fridays after the Towers?

[Alejo_NIN]

that was london square,
but yea, pretty much sunoco is the same.

[adlpb]

Originally Posted by Alejo_NIN dyno tune is for numbers, street tune is for drivability.AFAIK but still, you car runs like shit cuz it was probably abused as fuck... watch this: @1:07 you car is kicking an Evo's ass.... Street Racing Diaries - S01E01 RadonElement.com - YouTube

You mean his car kicking a MS6's ass and then getting raped by an evo? Let's not get our cars wrong here

[jack_hammer]

Originally Posted by S3BAZ1091 so i spoke to adam today, he said he did a GT3076R turbo. did a full engine. with CPE heads and isdrium rods or something like that, he told me that japtrix tunned the car when the first engine blew. he then took it to VF who built the engine and the engine was put in at the mazda dealer with felipe. the rest the car had already. so tomorrow im going to check for any leaks on the car and check what else we can find.

Do you mean cpe pistons?

Fuck dude, get your shit together

Probably sent from a toilet

[jack_hammer]

I'm unsubscribing. I can't take this shit.. Someone please mention me when it blows up.

Probably sent from a toilet

[Raider]

I'm gonna guess he meant CP Pistons.

[Constantin]

broncojd78, quick update. Didn't blow up just yet

[S3BAZ1091]

Originally Posted by broncojd78 I'm unsubscribing. I can't take this shit.. Someone please mention me when it blows up. Probably sent from a toilet

Listen bro if you got nothing positive to say then don't say shit. Tired if you're bitching everyone here has been helpful and supportive but you. Just being negative. Everyone makes mistakes . You have and I have and that's how you learn .its not like you were born knowing everything about Mazda's. So now I'm learning. Alright bro. So if you got nothing good to say then stay out thanks. And thanks to all of the rest who have been SUPPORTIVE AND HELPFUL!

[jack_hammer]

Originally Posted by S3BAZ1091 Listen bro if you got nothing positive to say then don't say shit. Tired if you're bitching everyone here has been helpful and supportive but you. Just being negative. Everyone makes mistakes . You have and I have and that's how you learn .its not like you were born knowing everything about Mazda's. So now I'm learning. Alright bro. So if you got nothing good to say then stay out thanks. And thanks to all of the rest who have been SUPPORTIVE AND HELPFUL!

bro, cry me a fucking river, bro. next time I'm be sure to channel my sensitive side so you don't get butt hurt, bro.

But this time, bro, I'm not.

First of all, bro, i unsubscribed and someone else mentioned me. Otherwise i wouldn't even have to even see your whiny rant, bro.

Secondly, i have not done anything but point out your current mistakes as you make them bro. I can't make you smarter, but i can show you how dumb you are, bro.

Thirdly, bro, i haven't harped on them either, bro. You just fuck up a lot right now so i have a lot to point out. Seriously, bro, of you don't get corrected, you'll keep running your engine at wot, to 65k rpm, with an engine running cpe heads, bro. What the fuck do you want me to say bro?! Nod and say,"fuck yea bro, you're fucking awesome."

Piss off. And next time you talk to the fucktard that "built" your headache of a car, take notes bro. So when you come back to report what your car has had done, you can say DEFINITIVELY what the fuck is going on bro.

The only love i can show you is tough love, bro. Sink or swim.









Bro

Probably sent from a toilet

[Alejo_NIN]

Originally Posted by broncojd78 bro, cry me a fucking river, bro. next time I'm be sure to channel my sensitive side so you don't get butt hurt, bro. But this time, bro, I'm not. First of all, bro, i unsubscribed and someone else mentioned me. Otherwise i wouldn't even have to even see your whiny rant, bro. Secondly, i have not done anything but point out your current mistakes as you make them bro. I can't make you smarter, but i can show you how dumb you are, bro. Thirdly, bro, i haven't harped on them either, bro. You just fuck up a lot right now so i have a lot to point out. Seriously, bro, of you don't get corrected, you'll keep running your engine at wot, to 65k rpm, with an engine running cpe heads, bro. What the fuck do you want me to say bro?! Nod and say,"fuck yea bro, you're fucking awesome." Piss off. And next time you talk to the fucktard that "built" your headache of a car, take notes bro. So when you come back to report what your car has had done, you can say DEFINITIVELY what the fuck is going on bro. The only love i can show you is tough love, bro. Sink or swim. Bro Probably sent from a toilet

you are an idiot.
good bye.

[Constantin]

Originally Posted by broncojd78 The only love i can show you is tough love, bro. Sink or swim.

+1 for thought love.....it's the only MSF way, right?

Now let's stop fighting and help him out....on my way to Alvaro's house for MS3101

[Alejo_NIN]

where is this guys house?
coral springs?

[Constantin]

First of all adlpb thank you very much for you hospitality today!

So, we looked at S3BAZ1091's car....I know that adlpb is eager to tell you all about it... So, I will just post pictures and Alvaro will tell you the whole story.

The list of aftermarket parts (confirmed):

Cobb SRI
Blitz air filter
CP-E (?) TIH
Stock exhaust manifold
Cobb DP
Greddy CBE
Stock (!) boost controller
CP-E HPFP
Forge V1 BPV
Custom pipe kit (partially fabricated)
Big core. I can't tell which one it is, b/c I just don't know.
OCC (?) - seems to be working, since Sebastian told us that he emptied it.
NO TIG's, coolen by-pass or EGR delete...

Let me know what I missed.

[Constantin]

More pics...

[Bucker]

Originally Posted by Constantin More pics...

What turbo? Any issues you guys were able to resolve while you were in there? Also, ride his ass until he gets a new boost controller... EBCS or MBC, he needs something. That explains the boost issues.

[adlpb]

Thanks for the pics Constantin

Yeah the biggest issue I saw was the plug in the first 2 pictures which I found not plugged in. It is right next to the fuel pump, and I'm not 100% sure what it's for. I plugged it back in.

The turbo has an IWG.

Another huge issue was the hot pipe to the intercooler is 2"...a gigantic restriction to the turbo. The hot pipe has also been noticeably welded, probably because of fitment issues or not car-specific.

None of the clamps are T-bolt type, so there could be leaks from all any of them.

Velocity Factor decided to make a full engine/clutch/turbo build and yet leave the OEM boost controller. Once again, fuck that place.

There is also an oil leak coming from the turbo area.

I recommended OP to invest in a boost controller, intercooler piping, T-bolt clamps. Those are just things I saw without taking any parts off. I'm sure there's more to find, granted velocity fucktor built the car

Originally Posted by Bucker What turbo? Any issues you guys were able to resolve while you were in there? Also, ride his ass until he gets a new boost controller... EBCS or MBC, he needs something. That explains the boost issues.

Definitely a 3076. It has a 4" inlet

[Alejo_NIN]

what about the disconencted sensor?
what are they/

[adlpb]

I'm not 100% sure.
Bucker Lex rfinkle2 any of you guys know what this sensor is for? It is right next to the fuel pump, one single green wire. He didn't have a CEL.

[speeed]

S3BAZ1091 I bought my EBCS on coral springs for $ 79 i think is aw motorsports or something like that...
so no shipping time waiting...

[S3BAZ1091]

Originally Posted by Constantin First of all adlpb thank you very much for you hospitality today! So, we looked at S3BAZ1091's car....I know that adlpb is eager to tell you all about it... So, I will just post pictures and Alvaro will tell you the whole story. The list of aftermarket parts (confirmed): Cobb SRI Blitz air filter CP-E (?) TIH Stock exhaust manifold Cobb DP Greddy CBE Stock (!) boost controller CP-E HPFP Forge V1 BPV Custom pipe kit (partially fabricated) Big core. I can't tell which one it is, b/c I just don't know. OCC (?) - seems to be working, since Sebastian told us that he emptied it. NO TIG's, coolen by-pass or EGR delete... Let me know what I missed.

yes thanks to adlpb for his hospitality and effort in removing my rmm but thanks to VF retarded asses we werent able to remove the bracket. so next weekened but really appreciate the help from adlpb and Constantin. great help, great advice and tips. really cant thank you guys enough

Originally Posted by adlpb Thanks for the pics Constantin Yeah the biggest issue I saw was the plug in the first 2 pictures which I found not plugged in. It is right next to the fuel pump, and I'm not 100% sure what it's for. I plugged it back in. The turbo has an IWG. Another huge issue was the hot pipe to the intercooler is 2"...a gigantic restriction to the turbo. The hot pipe has also been noticeably welded, probably because of fitment issues or not car-specific. None of the clamps are T-bolt type, so there could be leaks from all any of them. Velocity Factor decided to make a full engine/clutch/turbo build and yet leave the OEM boost controller. Once again, fuck that place. There is also an oil leak coming from the turbo area. I recommended OP to invest in a boost controller, intercooler piping, T-bolt clamps. Those are just things I saw without taking any parts off. I'm sure there's more to find, granted velocity fucktor built the car Definitely a 3076. It has a 4" inlet

thanks for the great help and inside into all the issues you found, yes i am going to invest on boost controller as soon as i can. maybe this week with any left over money from the insurance. i will be investing in new piping kit, plus the tbolt clamps and replacing that blitz filter.

Originally Posted by speeed S3BAZ1091 I bought my EBCS on coral springs for $ 79 i think is aw motorsports or something like that... so no shipping time waiting...

AWD motorsports? theres one next to my house so il go and check them out. thanks!

[S3BAZ1091]

this piping kit correct? :
Protege Garage - Protege Garage DIY Intercooler Pipe Kit - Mazdaspeed3

and this EBCS?
GrimmSpeed

[G26]

Originally Posted by S3BAZ1091 yes thanks to adlpb for his hospitality and effort in removing my rmm but thanks to VF retarded asses we werent able to remove the bracket. so next weekened but really appreciate the help from adlpb and Constantin. great help, great advice and tips. really cant thank you guys enough thanks for the great help and inside into all the issues you found, yes i am going to invest on boost controller as soon as i can. maybe this week with any left over money from the insurance. i will be investing in new piping kit, plus the tbolt clamps and replacing that blitz filter. AWD motorsports? theres one next to my house so il go and check them out. thanks!

Yes those.

[Blackedout1978]

Originally Posted by adlpb Yeah that's him. When I bought my Mazda I saw him driving it a couple times. He would tell me about all the shit he did to his car, like street race it on a constant basis. Judging from this and other factors (such as seeing him destroy his speakers), the "built" engine has definitely been abused. Being the manager, he also drove 2011 MS3 given from the dealer. They offered to sell me this car with 2000miles on it. I sat on it, it looked like a 3 year old car. Turn the key and the radio was on max volume on a station along the lines of Power96. I walked out of the car. Adam is not the type of guy who would have taken care of his car.

This is were i got my Speed as well Lou Bach. Adam was also bragging about the car at this time i was picking up my speed. VF did the work and they are bunch of rip off artists who dont know there ass from there elbow. Stay clear of Velocity Factor.

[G26]

Got my ms3 from Lou Bach also, luckily it was just off the boat lol.

[Blackedout1978]

They arent doing the PG piping kit anymore. I would try going with COBB's piping kit without the core. It's pricey but i been over it with Ken at protege garage for months now, and doesnt look like there will be any more of the kits anytime soon. So if you have a core and you need piping you either have a new one fabbed up or COBB's unless anyone knows any other options. I think Treadstone sells the uncut pieces. You would have to be very good at fabrication to go that route though. Also i would buy your grimspeed from eric@edgeautosport Hopefuuly they should have my piping by the end of the wweek its been on back order for ever now. I am driving down to Sid3wayS place sometime in the next week or 2 for my install, but we can always party at my place haha. I know its too far but i thought i would throw it out there.

[93silvergt]

Why not cx racing piping? Cheaper

[rfinkle2]

Originally Posted by adlpb I'm not 100% sure. Bucker Lex rfinkle2 any of you guys know what this sensor is for? It is right next to the fuel pump, one single green wire. He didn't have a CEL.

Alvaro, the first pic is not a factory mounting location afaik, so you have some bonus hardware that is probably no longer functional / connected.

The second pic, I cannot tell you for the life of me what the plug is for. I went out to my car and don't have that plug.

EDIT: also searched as many parts diagrams I could find and don't see anything that has a plug / connection like that in that location.

The canister in front of the hpfp is the egr (you likely knew that), but I don't have a clue what either of those 2 pics are. Sorry I cannot help you more.

[S3BAZ1091]

so what other piping kit should i get then? cobb is way expensive for me right now..

[warlord]

Unfortunately there aren't any cheap piping kits. Stick with a mild tune till you save up for a legit kit like a Cobb, CP-e or Ultimate.

Just because your core looks big doesn't mean that's it's efficient either. It's starting to look like Adam blew the motor because small core, high BAT's, shitty tune and then left the piping in place and bought a cheap large core to get the car sold. Save your pennies and replace the whole FMIC when you have the money.

BTW. When I saw your car about a year ago it had a small core so that explains the small piping. It also had Konig wheels on it too.

[Ms3_Miami]

now that your VIP go to the For Sale section and see if someone is selling their fmic or piping kit. If not you can get the cx racing piping kit like mentioned above, it should be better then what you have on now. And the intercooler seems to be from Precision turbo, atleast thats what it says on the end tanks.
After a little research I found a site with decent pictures, they dont look too cheap to me
Import Evolution


Edit: you should move the OCC, cause everything looks super tight around the sri.Since you have the stock motor mounts with the movement of the engine it might slash one of the occ hoses and make a mess.

[S3BAZ1091]

Originally Posted by warlord Unfortunately there aren't any cheap piping kits. Stick with a mild tune till you save up for a legit kit like a Cobb, CP-e or Ultimate. Just because your core looks big doesn't mean that's it's efficient either. It's starting to look like Adam blew the motor because small core, high BAT's, shitty tune and then left the piping in place and bought a cheap large core to get the car sold. Save your pennies and replace the whole FMIC when you have the money. BTW. When I saw your car about a year ago it had a small core so that explains the small piping. It also had Konig wheels on it too.

thanks i saw the cx piping kits for around 139 but there universal.. idk which one would fit my car..

Originally Posted by Ms3_Miami now that your VIP go to the For Sale section and see if someone is selling their fmic or piping kit. If not you can get the cx racing piping kit like mentioned above, it should be better then what you have on now. And the intercooler seems to be from Precision turbo, atleast thats what it says on the end tanks. After a little research I found a site with decent pictures, they dont look too cheap to me Import Evolution Edit: you should move the OCC, cause everything looks super tight around the sri.Since you have the stock motor mounts with the movement of the engine it might slash one of the occ hoses and make a mess.

yeah ima go over and check it out, i seen the cx piping kit, but there universal like i just said so idk which one would fit my car.. :S and well the lines are clear, just thinking of maybe getting a smaller one in the future..

[Ms3_Miami]

Originally Posted by S3BAZ1091 thanks i saw the cx piping kits for around 139 but there universal.. idk which one would fit my car.. yeah ima go over and check it out, i seen the cx piping kit, but there universal like i just said so idk which one would fit my car.. :S and well the lines are clear, just thinking of maybe getting a smaller one in the future..

Email cx racing they will sell you the bolt on piping kit,same one they use for the fmic kit. I emailed them a while back,I didnt go with their kit cause the PG kit was in stock.

[S3BAZ1091]

Originally Posted by Ms3_Miami Email cx racing they will sell you the bolt on piping kit,same one they use for the fmic kit. I emailed them a while back,I didnt go with their kit cause the PG kit was in stock.

sell me yours? lol jk . gonna go email them right now. thanks!

[S3BAZ1091]

So cxracing is offering me to sell me there fmic kit without the core and the bov for $430. Is that bad deal? It's a 2.5in piping.

[adlpb]

Originally Posted by S3BAZ1091 So cxracing is offering me to sell me there fmic kit without the core and the bov for $430. Is that bad deal? It's a 2.5in piping.

Does it include T-bolt clamps

[dereeek]

Originally Posted by S3BAZ1091 So cxracing is offering me to sell me there fmic kit without the core and the bov for $430. Is that bad deal? It's a 2.5in piping.

In my opinion, that's a bad deal. Make a wtb thread for the pipe, maybe you'll get lucky

[anavrinIV]

get a universal kit off ebay for ~$100 and route it. Not the prettiest option but by far the cheapest if you can do it.