Mazdaspeed Forums

Mazdaspeed Forums (http://www.mazdaspeedforums.org/forum/)
-   MazdaSpeed 3 - Engine, Transmission & Driveline (http://www.mazdaspeedforums.org/forum/f10/)
-   -   New JBR MAZDASPEED 3 SRI & CAI Systems (http://www.mazdaspeedforums.org/forum/f10/new-jbr-mazdaspeed-3-sri-cai-systems-135209/)

JBR 01-14-2013 05:35 AM

New JBR MAZDASPEED 3 SRI & CAI Systems
 
It’s with great pleasure that I bring to you the new JBR Power Path Short Ram Intake Systems. With over 8 months of intense research and development, JBR brings to you the absolute finest Short Ram and Cold Air Intake Systems available for your MAZDASPEED. What makes our modular designed intakes better than the rest? We’ve added wire reinforcement and additional layers of silicone and polyester for increased structural integrity and the superior ability to insulate the intake air from extreme engine temperatures. Our MAF housing is the lightest currently available anywhere which significantly reduces heat soak and sheds heat faster. These are just a couple of things that make the JBR Power Path Intakes Systems the very best the market has to offer.

http://www.jamesbaroneracing.com/sto...800x600-S1.jpg

And we didn’t just stop there…
JBR has partnered with Stratified Automotive Controls to bring you free Stage 1 and Stage 2 AccessPort off-the-shelf maps for your new JBR Intake System! These maps aren’t just some existing OTS maps with MAF calibrations applied to them; these maps are engineered using Stratified’s own proprietary logic. Stratified is a COBB licensed Pro Tuner, specializing in Vehicle Tuning, Engine Management, Turbo Charging, Boost Control and Direct Injection Technology.

Unlock the potential of your JBR Power Path Intake System with a free Stratified OTS map, and then unleash the full power of your MAZDSPEED with a Pro Tune by Stratified.

http://www.jamesbaroneracing.com/sto...go_640x148.png

So if you’re in the market for an intake system, look no further. Quality, Price, Performance and Support, it’s what JBR is known for.

deadlandxtreme 01-14-2013 05:52 AM

Smart move providing OTS maps for people. This is an excellent business plan to keep the new MS3 modders from being to scared to choose a setup outside the Cobb OTS availability. Well played and no doubt top notch product.

JBR 01-16-2013 02:40 PM

Lex did an outstanding job with these OTS maps. Great power, excellent drive-ability.

Nliiitend1 01-16-2013 04:48 PM

Quote:

Originally Posted by jbarone (Post 1842088)
Lex did an outstanding job with these OTS maps. Great power, excellent drive-ability.

I'd expect nothing less.

:fing02:

BottleOfCola13 01-16-2013 04:54 PM

Very Nice! :bigok:

SC08Speed3 01-16-2013 06:46 PM

My brother just got an 07 Speed 3 that is unmolested.. I'm sending him your way for this!!

JBR 01-17-2013 12:59 PM

Quote:

Originally Posted by SC08Speed3 (Post 1842526)
My brother just got an 07 Speed 3 that is unmolested.. I'm sending him your way for this!!

A virgin, so hot.

Thanks man.

SC08Speed3 01-17-2013 06:20 PM

Quote:

Originally Posted by jbarone (Post 1843910)
A virgin, so hot.

Thanks man.

Lol. I will be getting some parts from you as well...probably intake/TB tigs and a catch can! Keep up the good work man!

JBR 01-17-2013 08:06 PM

Quote:

Originally Posted by SC08Speed3 (Post 1844509)
Lol. I will be getting some parts from you as well...probably intake/TB tigs and a catch can! Keep up the good work man!

Cool, let me know if you have any questions.

-j

jared. 01-20-2013 02:07 PM

I just ordered mine ...

Kellerspeed3 01-20-2013 02:20 PM

JBR FTW again!

JBR 01-23-2013 02:42 PM

Thanks guys!

skiptowncat 01-26-2013 02:44 AM

What diameter are these?

J.Dy 01-26-2013 02:56 AM

I asked the same question
Quote:

Originally Posted by skiptowncat (Post 1859183)
What diameter are these?

Quote:

Originally Posted by jbarone (Post 1841992)
The MAF is 68mm. The straighteners are a machined fit and pressed in.


Chief_Wiggum 01-28-2013 11:09 AM

I pulled the trigger on the stage 2 setup and dumped by CP-e SRI/PG tip and hypertech. The one piece intake/tip combined with the Stratified S-OTS stage 1 93 octane map is a huge improvement over what i had. Even running the stage 2 intake on stock tune was an improvement in my opinion.

As always, JBR's stuff is second to none in craftsmanship, price and the ever important customer service. The fact that he teamed up with Lex/Stratified tuning is icing on the cake! Congrats to you both!

JBR 02-02-2013 09:44 PM

Thanks Chief! I'm glad you're pleased with the intake.

BlueDmnSpeed 02-02-2013 09:56 PM

@jbarone; great job man. also whats the sizes of these intakes? oh and :3some: for sexy products! :)

kolosok17 02-02-2013 10:00 PM

Are these CARB certified?

faeker 02-02-2013 10:10 PM

my god california sucks. pull the trigger and get the intake. when inspection comes swap it out for oem to get the sticker.

JBR 02-02-2013 11:04 PM

Quote:

Originally Posted by BlueDmnSpeed (Post 1873469)
@jbarone; great job man. also whats the sizes of these intakes? oh and :3some: for sexy products! :)

68mm

Quote:

Originally Posted by kolosok17 (Post 1873476)
Are these CARB certified?


5 minutes to swap out the maf for the stock air box, check this out...

http://i1129.photobucket.com/albums/...ps0d976609.jpg

Tronix 02-03-2013 02:51 PM

Looks sweet

JBR 03-05-2013 01:41 PM

Included with every JBR Power Path Intake is new replacement MAF sensor o-ring, just in case something happens to your OEM o-ring. It' just one of the little things we include to ensure your install goes smoothly and there's no waiting until Monday to get a $15.00 replacement from the dealer. Engineering with added peace of mind.


http://www.jamesbaroneracing.com/sto...es/JBR_PPI.jpg

Chief_Wiggum 04-16-2013 10:32 AM

I installed JBR's stage 2 intake, replacing another brands SRI and TIP. As usual, the quality and fitment was top-notch. I finally got my autotech intenals installed and upgraded to the S-OTS stage 2 map...what a difference, it's phenomonal. JBR and Stratified, two of the greats working together...what else could you want?

JBR 05-14-2013 06:12 AM

These intake systems have been flying off the shelves. We're very happy with the response we've received for a product that we never anticipated would sell so well. Thank You!

3starmagnum 05-14-2013 07:19 AM

Have to admit Jamie, when products are this good, they will sell!!!!

TWENTY1 05-14-2013 11:02 AM

My stage two is awaiting for me at home, 2 days till finals are over. Thanks @jbarone!

JBR 06-06-2013 08:57 AM

Quote:

Originally Posted by TWENTY1 (Post 2061057)
My stage two is awaiting for me at home, 2 days till finals are over. Thanks @jbarone!

Should be installed by now.

Chief_Wiggum 07-22-2013 03:13 PM

The JBR stage 2 SRI combined with the S-OTS map has been the best bang for buck upgrade I've made. If anyone is on the fence about which one to get, ponder no more...

JBR 07-30-2013 01:40 PM

Now available in white!

http://www.jamesbaroneracing.com/sto...800x600-S1.jpg

daytonabluez05 08-17-2013 04:19 PM

I cant wait to get the stage 2. still on the fence though between red or white :sad:

JBR 10-31-2013 11:07 PM

Quote:

Originally Posted by daytonabluez05 (Post 2216599)
I cant wait to get the stage 2. still on the fence though between red or white :sad:

Plenty of both in stock!!

daytonabluez05 10-31-2013 11:19 PM

Ordered the white stage 2 from Edge, hopefully I get some stickers... ;)

JBR 11-07-2013 12:01 AM

Quote:

Originally Posted by daytonabluez05 (Post 2321561)
Ordered the white stage 2 from Edge, hopefully I get some stickers... ;)

If you didn't let me know and I will send you some.

daytonabluez05 11-10-2013 07:24 PM

Got it and I love it! I notice a huge difference in sound and performance, but my computer crashed before I could do the stratified tune so stuck with OTS stage1 right now. I got the JAMES BARONE RACING. Sticker that will go on soon as I clean the back window. I'll take more stickers though for the side window if you have extras :cool2:

my2k13speed3 02-20-2014 11:36 AM

Quote:

Originally Posted by jbarone (Post 1873548)
5 minutes to swap out the maf for the stock air box, check this out...

So if you were to leave the JBR silicon intake hose and silicon turbo inlet pipe and just re-install the stock MAF and stock air box it should pass CA emissions? California sucks with their emission laws...

Thanks in advance!

JBR 02-20-2014 12:36 PM

Quote:

Originally Posted by my2k13speed3 (Post 2461673)
So if you were to leave the JBR silicon intake hose and silicon turbo inlet pipe and just re-install the stock MAF and stock air box it should pass CA emissions? California sucks with their emission laws...

Thanks in advance!

Yes, that's what I've been told . We've surprisingly sold way more to CA residents than I thought we would so there must be some truth to it.

-Jamie


All times are GMT -7. The time now is 07:30 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
SEO by vBSEO ©2011, Crawlability, Inc.
vB.Sponsors

©Copyright 2008 ; 2019 Cymru Internet Services LLC | FYHN™ Autosports HQ
Ad Management plugin by RedTyger

Page generated in 0.20651 seconds with 11 queries