PCV fail?

[Silverspec06]

Hey so Im kinda thinking its my pcv valve but im not 100% sure, will be likely getting one tomorrow and doing a occ, but I would really like to fix it tonight.

I was driving home car was warm first gear little bit of a launch not to hard, engine died throwing these codes

p2128
p0443
p2088
p0403
p2009
u2023

I have since pulled everything apart cleaned my egr, checked the inlet for excessive oil there wasn't that much. In the logs ive done everything looked fine car was running a little lean at wot afr's of 11.9 instead of 11.6

After cleaning the EGR and piping Im getting

p2128
p2088
p2101
p0091
u2023

Mods are SRI,TIP COBB, CNT DP, Autotech internals, NGK step colder plugs, Godspeed fmic, cobb stage 2 tune any ideas? and I know to donate my vip just expired ill be doing it right after I fix this, need to save every penny Im in school and have rent to pay (I know bought the wrong car for saving money)

[Turbo_Steve]

Wow, those codes are so random and not related to eachother. My guess is that you have some electrixal gremlins. Check your pcm connectors make sure they are locked down. Try remove and re connect them. Also inspect the harness right by the clamp on your tip.

[Silverspec06]

Originally Posted by Turbo_Steve Wow, those codes are so random and not related to eachother. My guess is that you have some electrixal gremlins. Check your pcm connectors make sure they are locked down. Try remove and re connect them. Also inspect the harness right by the clamp on your tip.

I ended up googling it again someone had some similar codes turned out to be a fuse check it. It was engine blk a 15 amp fuse burnt out. Thanks though.

Mods can we please close. Thanks all ps VIP tonight