![]() | ![]() |
![]() | ![]() | ![]() | ![]() | ![]() | ![]() |
|
| |||||||
| MazdaSpeed 3 - Engine, Transmission & Driveline Discussion of engine, tranny and drivelines. |
|
Welcome to Mazdaspeed Forums . You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact contact us. *When you join MSF as a registered user, there will be No Ads. *Registered Members get access to the Off Topic Area of the Forum *Registered Members have an opportunity to upgrade their accounts to VIP, which brings a host of goddies for supporting MSF such as Raffles, Additional Forum Access, More PM Storage, The ability to upload more Images and many other enhancements. *Registered members also get access to the live chat box! |
![]() |
| | | LinkBack | Thread Tools | Search this Thread | Display Modes |
![]() | | #161 | ![]() |
![]() Join Date: Jul 2013
Posts: 15
(View Stats)
iTrader: (0)
Rep Power: 0 ![]() ![]() ![]() ![]() ![]() Thanks: 0
Thanked 9 Times in 3 Posts
Groans: 0
Groaned at 0 Times in 0 Posts
| Not Ranked : 0 score |
| | |
| The Following 4 Users Say Thank You to Needaspeed3 For This Useful Post: |
![]() | | #162 | ![]() |
![]() Join Date: Nov 2011 Location: hollywood Fl
Posts: 3,205
(View Stats)
iTrader: (4)
Rep Power: 0 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Thanks: 1,448
Thanked 4,835 Times in 1,585 Posts
Groans: 42
Groaned at 39 Times in 28 Posts
| Not Ranked : 0 score Holy guacamole, Any big plans for it? Its a perfect project car
__________________ i got a useless big fucking turbo Fuck mazdaspeeds Fuck shayne |
| | |
![]() | | #163 | ![]() |
![]() Join Date: Jul 2013
Posts: 15
(View Stats)
iTrader: (0)
Rep Power: 0 ![]() ![]() ![]() ![]() ![]() Thanks: 0
Thanked 9 Times in 3 Posts
Groans: 0
Groaned at 0 Times in 0 Posts
| Not Ranked : 0 score Nothing yet. I just finished sorting out all the stuff that need to be fixed. I put tires, brakes, and changed the sway bar bushings. The PO installed Koni yellow struts. I'm getting ready to ship the car out. I will start tinkering with it when I get it back. |
| | |
![]() | | #164 | ![]() |
![]() Join Date: Jun 2008 Location: Midwest
Posts: 575
(View Stats)
iTrader: (2)
Rep Power: 0 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Thanks: 477
Thanked 311 Times in 189 Posts
Groans: 0
Groaned at 1 Time in 1 Post
| Not Ranked : 0 score Suh-WEEET! Did you do the bushings yourself? I had mine done at about 100k, and now at 172k they are making noise again.
__________________ 2007 Sunlight Silver MazdaSpeed3 Sport | BNR S3v2 | Autotech Internals | Cobb TIH | 3BAR MAP Sensor | Denso itv-22's | MSCAI | ETS 3.5" TMIC | Synchronic DV | Stratified EBCS | Guardian Angel | UR Test Pipe | Cobb AP | Koni Yellows | JBR RMM | CORN YEAH! | 265,000m | Tuned by STRATIFIED!!! To install: CPE SafeSeals 2012 Velocity Red MazdaSpeed3 w/Tech | Autotech Internals | Sure Aeros V2 | 98,000m |
| | |
![]() | | #165 | ![]() |
![]() Join Date: Mar 2012 Location: Middletown, CT
Posts: 1,700
(View Stats)
iTrader: (1)
Rep Power: 0 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Thanks: 84
Thanked 750 Times in 515 Posts
Groans: 1
Groaned at 7 Times in 5 Posts
| Not Ranked : 0 score What kind of noise do they make ? I have a light knock when I set off and when I stop. Sounds like its coming from the passenger wheel.
__________________ Black 2006 MS6 GT with Navigation // Cobb AP V2 // Cobb SRI // M2 Catless DP // Autotech internals // JBR 80 Duro RMM |
| | |
![]() | | #166 | ![]() |
![]() Join Date: Apr 2013 Location: Seattle, WA
Posts: 2,159
(View Stats)
iTrader: (0)
Rep Power: 0 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Thanks: 1,526
Thanked 4,311 Times in 1,156 Posts
Groans: 0
Groaned at 5 Times in 5 Posts
| Not Ranked : 0 score |
| | |
![]() | | #167 | ![]() |
![]() Join Date: May 2012 Location: Newnan, GA
Posts: 1,792
(View Stats)
iTrader: (2)
Rep Power: 0 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Thanks: 902
Thanked 734 Times in 451 Posts
Groans: 1
Groaned at 1 Time in 1 Post
| Not Ranked : 0 score and here I thought I was on the last 1/4 of my cars life at 84k pffffffftttt
__________________ 08 cwp ms3 |
| | |
![]() | | #168 | ![]() |
![]() Join Date: Jul 2013
Posts: 15
(View Stats)
iTrader: (0)
Rep Power: 0 ![]() ![]() ![]() ![]() ![]() Thanks: 0
Thanked 9 Times in 3 Posts
Groans: 0
Groaned at 0 Times in 0 Posts
| Not Ranked : 0 score The front and rear made a rapid clunking sound when I would hit a bump. I changed the rear bushings and had the dealer change the fronts. I tried but it was difficult in the parking lot of my apartment. Car is now silent. |
| | |
![]() | | #169 | ![]() |
![]() Join Date: May 2013
Posts: 2
(View Stats)
iTrader: (0)
Rep Power: 0 ![]() Thanks: 0
Thanked 0 Times in 0 Posts
Groans: 0
Groaned at 1 Time in 1 Post
| Not Ranked : 0 score Have identical car. Color an wheel setup. Stage colder plugs cobb v3acessport. 102xxx no smoke. Still purs. Although in mass the roads eat sway bar bushings. Less 15$ online |
| | |
![]() | | #170 | ![]() |
![]() Join Date: Jun 2008 Location: Midwest
Posts: 575
(View Stats)
iTrader: (2)
Rep Power: 0 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Thanks: 477
Thanked 311 Times in 189 Posts
Groans: 0
Groaned at 1 Time in 1 Post
| Not Ranked : 0 score ![]() Original engine and turbo! What a great car.
__________________ 2007 Sunlight Silver MazdaSpeed3 Sport | BNR S3v2 | Autotech Internals | Cobb TIH | 3BAR MAP Sensor | Denso itv-22's | MSCAI | ETS 3.5" TMIC | Synchronic DV | Stratified EBCS | Guardian Angel | UR Test Pipe | Cobb AP | Koni Yellows | JBR RMM | CORN YEAH! | 265,000m | Tuned by STRATIFIED!!! To install: CPE SafeSeals 2012 Velocity Red MazdaSpeed3 w/Tech | Autotech Internals | Sure Aeros V2 | 98,000m |
| | |
| The Following User Says Thank You to BackRoads For This Useful Post: | blackms3_71 (02-22-2014) |
![]() | | #171 | ![]() |
![]() Join Date: Apr 2012 Location: port orchard, w.a
Posts: 2,250
(View Stats)
iTrader: (1)
Rep Power: 501 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Thanks: 655
Thanked 695 Times in 437 Posts
Groans: 2
Groaned at 15 Times in 9 Posts
| Not Ranked : 0 score Nice to see that. Stock? Or bolt ons?
__________________ COBB ACCESSPORT//TURBOXS CATLESS DP+RACEPIPE//3 BAR MAP//3.5" HTP INTAKE//NGK 1 STEP COLDER PLUGS//HKS CATBACK//AUTOTECH INTERNALS//COBB FMIC V2.0//HKS BOV BLACK EDITION IN VTA//RPF1 17x9//pilot super sport 245/45/17//ACT 6 PUCK//M.D OCC VTA//TOKAY SEALS//BNR S4//Hypnotic tuned |
| | |
![]() | | #172 | ![]() |
![]() Join Date: Jun 2008 Location: Midwest
Posts: 575
(View Stats)
iTrader: (2)
Rep Power: 0 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Thanks: 477
Thanked 311 Times in 189 Posts
Groans: 0
Groaned at 1 Time in 1 Post
| Not Ranked : 0 score CAI, AP, Koni yellows - that's it so far. Compression is decent, so I am considering AT internals, BNRS3, DP, and it needs a clutch.
__________________ 2007 Sunlight Silver MazdaSpeed3 Sport | BNR S3v2 | Autotech Internals | Cobb TIH | 3BAR MAP Sensor | Denso itv-22's | MSCAI | ETS 3.5" TMIC | Synchronic DV | Stratified EBCS | Guardian Angel | UR Test Pipe | Cobb AP | Koni Yellows | JBR RMM | CORN YEAH! | 265,000m | Tuned by STRATIFIED!!! To install: CPE SafeSeals 2012 Velocity Red MazdaSpeed3 w/Tech | Autotech Internals | Sure Aeros V2 | 98,000m |
| | |
![]() | | #173 | ![]() |
![]() Join Date: Jun 2012 Location: San Jose, CA
Posts: 3,093
(View Stats)
iTrader: (4)
Rep Power: 0 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Thanks: 5,963
Thanked 3,103 Times in 1,356 Posts
Groans: 47
Groaned at 72 Times in 45 Posts
| Not Ranked : 0 score Wow, here I am at 89K miles thinking I need to get rid of this thing before it hits 100K... Lol. These cars are so hit or miss. Some people don't make it to 50K without replacing the engine and others are nearing 200K... What the fuck.
__________________ 2006 Mazdaspeed6 FreekTune | 91 | JBR 3", PMM & RMM | CS Racepipe, TMIC & TMM Inserts | Autotechs ![]() |
| | |
| The Following User Says Thank You to sidekick For This Useful Post: | Arnie1229 (01-07-2015) |
![]() | | #174 | ![]() |
![]() Join Date: Jul 2012 Location: Toledo, OH
Posts: 1,155
(View Stats)
iTrader: (3)
Rep Power: 0 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Thanks: 1,271
Thanked 1,268 Times in 560 Posts
Groans: 16
Groaned at 0 Times in 0 Posts
| Not Ranked : 0 score I'm at 112k with original turbo and clutch Giving it a little "tappy-tap-tap-taparoo" via HTC
__________________ 07 Mazdaspeed 3 Grand Touring Black Mica (The Summer Daily / Toy) Fanboy Brand Mods: A'PEXi Turbo Timer, Autotech Internals, BNR S3 V1, Bosch 3 Bar MAP, CNT 3" CBE, COBB AP V3, STS, FMIC Piping, Corksport Adjustable Shocks/Struts, CP-E Dash Pod, Safe-Seals, Enkei Evo IX (17x8+38), Exide 51RX Battery, FoMoCo XT-M5-QS, Grimmspeed EBCS, Ground Control Bumpstops, Hankook RS-3 (235/45/17), H&R Springs, Hawk HPS Pads, HTP 51R Battery Tray, JBR 88d RMM, 80d PMM, Shifter Bushings, TIG's, Secondary EGR Delete, 3.5" Aluminum WP, Mudflaps, Kozmic Primary EGR Delete, maisonvi Knob Collection, Damond OCC, NGK LTR7IX-11, Progress RSB, Prosport Boost, Oil Temp, Oil Press, Redline Tuning Hood Struts, SPC Camber Arms, Speed Daddy (Ebay) Catless DP, SP63 MAP Harness, Stratified Guardian Angel, Treadstone TR8, TRZ TMM, TurboXS H-RFL VTA BOV, XS Power V1 Manifold Maisonvi's Inherited Motor Build: ARP L19 Head Studs, Crank Bolt, Cam Bolts, Manley H-Beam Rods, SP63 Wiseco Armor Plated Pistons, New Rice, AKA To be Installed: Autoexe Front Bumper Cover, GT Spec Strut Brace, Wedge Engineering Seat Base, Sparco Speed Bucket Seat, 08 Mazda 6i Hatchback (The Daily MPG Commuter) 93 Mazda B2600i 4wd (The Winter Beater / terMINATOR Parts Hauler) ![]() |
| | |
![]() | | #175 | ![]() |
![]() Join Date: Jun 2008 Location: Midwest
Posts: 575
(View Stats)
iTrader: (2)
Rep Power: 0 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Thanks: 477
Thanked 311 Times in 189 Posts
Groans: 0
Groaned at 1 Time in 1 Post
| Not Ranked : 0 score
I have been worried at each major milestone. Now I worry whether it is a waste to go big turbo since the car has a lot of miles. But driving it yesterday through the hills... I tell you, my little self-tune LOVES this cold weather! I get a bit of a rough patch in acceleration occasionally, but throttle response is crazy, and it pulls hard! I need to get some time to run some fresh logs.
__________________ 2007 Sunlight Silver MazdaSpeed3 Sport | BNR S3v2 | Autotech Internals | Cobb TIH | 3BAR MAP Sensor | Denso itv-22's | MSCAI | ETS 3.5" TMIC | Synchronic DV | Stratified EBCS | Guardian Angel | UR Test Pipe | Cobb AP | Koni Yellows | JBR RMM | CORN YEAH! | 265,000m | Tuned by STRATIFIED!!! To install: CPE SafeSeals 2012 Velocity Red MazdaSpeed3 w/Tech | Autotech Internals | Sure Aeros V2 | 98,000m | |
| | |
| The Following User Says Thank You to BackRoads For This Useful Post: | sidekick (02-23-2014) |
![]() | | #176 | ![]() |
![]() Join Date: Nov 2009 Location: Tamaqua, PA
Posts: 12
(View Stats)
iTrader: (0)
Rep Power: 0 ![]() ![]() Thanks: 2
Thanked 3 Times in 2 Posts
Groans: 0
Groaned at 0 Times in 0 Posts
| Not Ranked : 0 score 160,000 miles on mine now. Original engine, turbo, trans. The only major expense on it that I think was something that shouldn't have worn out was a throttle body around 130K cause the stupid plastic gears wore and it started going into limp mode on random hot restarts when it was damp out. They should sell those gears cause paying $450 for a whole thing cause a 50 cent piece of plastic wore out is bullshit. I actually got the thing to work temporarily just by flipping the one gear over so the worn teeth weren't being used during idle control. Worked for a year till another code threw for "high opening error" or something. |
| | |
![]() | | #177 | ![]() |
![]() Join Date: Aug 2008 Location: sicklerville NJ/Philly
Posts: 413
(View Stats)
iTrader: (2)
Rep Power: 0 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Thanks: 2,050
Thanked 6,835 Times in 125 Posts
Groans: 2
Groaned at 1 Time in 1 Post
| Not Ranked : 0 score Bump lol
__________________ 1st. 2008 GT- Sold 2nd. 2010 - Sold 3rd. 2008 GT- sold 4th. 2008 Sport- project for 2016 |
| | |
![]() | | #178 | ![]() |
![]() Join Date: Mar 2008 Location: Navarre, FL
Posts: 8,057
(View Stats)
iTrader: (9)
Rep Power: 4957 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Thanks: 5,585
Thanked 9,466 Times in 2,601 Posts
Groans: 370
Groaned at 171 Times in 143 Posts
| Not Ranked : 0 score |
| | |
![]() | | #179 | ![]() |
![]() Join Date: Jun 2008 Location: Midwest
Posts: 575
(View Stats)
iTrader: (2)
Rep Power: 0 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Thanks: 477
Thanked 311 Times in 189 Posts
Groans: 0
Groaned at 1 Time in 1 Post
| Not Ranked : 0 score I will be crossing 216,000 today; thoroughly enjoying my BNRS3 at somewhere around 355whp. I should do some vdynos now that the weather is getting cooler. Still burning about a quart every 3500 miles or so, been that way for a long time.
__________________ 2007 Sunlight Silver MazdaSpeed3 Sport | BNR S3v2 | Autotech Internals | Cobb TIH | 3BAR MAP Sensor | Denso itv-22's | MSCAI | ETS 3.5" TMIC | Synchronic DV | Stratified EBCS | Guardian Angel | UR Test Pipe | Cobb AP | Koni Yellows | JBR RMM | CORN YEAH! | 265,000m | Tuned by STRATIFIED!!! To install: CPE SafeSeals 2012 Velocity Red MazdaSpeed3 w/Tech | Autotech Internals | Sure Aeros V2 | 98,000m |
| | |
| The Following User Says Thank You to BackRoads For This Useful Post: | 802MS3 (11-11-2015) |
![]() | | #180 | ![]() |
![]() Join Date: Aug 2008
Posts: 382
(View Stats)
iTrader: (0)
Rep Power: 0 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Thanks: 12
Thanked 52 Times in 47 Posts
Groans: 0
Groaned at 24 Times in 6 Posts
| Not Ranked : 0 score 117K OEM eng, turbo,clutch,trans |
| | |
![]() | | #181 | ![]() |
![]() Join Date: May 2012 Location: orlando, fl
Posts: 182
(View Stats)
iTrader: (0)
Rep Power: 0 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Thanks: 53
Thanked 74 Times in 43 Posts
Groans: 0
Groaned at 0 Times in 0 Posts
| Not Ranked : 0 score 140k miles here on stock engine, its the only thing that hasn't been changed in the car. Compression is till good, and it does eat a little bit of oil.
__________________ ---------------------------------------- Building it from ground up: ![]() |
| | |
![]() | | #182 | ![]() |
![]() Join Date: Nov 2011 Location: Crowley, TX
Posts: 1,803
(View Stats)
iTrader: (2)
Rep Power: 0 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Thanks: 1,624
Thanked 1,281 Times in 707 Posts
Groans: 24
Groaned at 5 Times in 5 Posts
| Not Ranked : 0 score 152k and time for a clutch. Just got done replacing the turbo and transmission. I blew second gear. And Yes, I am an Idiot for not replacing the clutch while the tranny was out! I've done a valve cleaning earlier this year and 2 yrs ago (110k?) I did timing chain and VVT. Compression is decent. A little extra leakdown past the rings on one cylinder, but it has been close to a year since I check either of those. |
| | |
| The Following User Says Thank You to redneck4Christ For This Useful Post: | BackRoads (11-10-2015) |
![]() | | #183 | ![]() |
![]() Join Date: Aug 2014 Location: Ventura County, CA
Posts: 69
(View Stats)
iTrader: (0)
Rep Power: 0 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Thanks: 68
Thanked 25 Times in 15 Posts
Groans: 0
Groaned at 0 Times in 0 Posts
| Not Ranked : 0 score I got 170k on the original engine but ever since hitting that mark i've been getting a misfire i haven't able to figure out, code says Cylinder 2 misfire and it didn't go away after new plugs and coils. No power loss or gas mileage effect... yet. I did however replace the whole transmission around 160k for a used one with 50k on it and put a Fidanza flywheel instead of the dual mass stock. That's probably the more expensive thing i had to do on it. I keep regular maintenance on it and stick to stock parts mostly. I just got some Moog sway bar links on the mail that need to be installed to quiet down a squeak back there.
__________________ __________________________________________________ ____________________________ 2008 BM Mazdaspeed3 / Fidanza Flywheel / E-Focus RMM / Bone Stock |
| | |
![]() | | #184 | ![]() |
![]() Join Date: Jun 2009
Posts: 2,834
(View Stats)
iTrader: (0)
Rep Power: 0 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Thanks: 1,512
Thanked 1,934 Times in 1,068 Posts
Groans: 157
Groaned at 47 Times in 31 Posts
| Not Ranked : 0 score Just hit 120,000 miles on original engine and drive train. I did replace the turbo with a rebuilt K04 back in the spring, and dealer did the VVT recall fix, if that counts, but the engine, cylinder head, all internals, clutch, transaxle, are otherwise completely OEM. Still has static cylinder compression of 190-195 across the board and has been run hard with mods below. There is a little bit of leak down percent increase, but nothing to speak of, only to watch for change.
__________________ 2017 Audi Q5 3.0 T (supercharged) Stage 2+ EPL tune, JHM overdrive crank pulley, EPL supercharger pulley, ZF8 TCU tune, aFe/034 intake, modified air box. 480 hp. Sunlight Silver '08 MS3 GT Mods: (Sold 1/25/2019 after 10+ years of ownership) BNR Stage 1 (to fix smoking K04 turbo), TurboXS 3" Catless DP/RP "Stealthback" into stock CBE, Vibrant 3 inch Ultra Quiet Resonator in RP section, Magnaflow 3 1/2" exhaust tip, Mazdaspeed CAI w/air straightener and K&N conical filter, NGK 6510 Iridium IX one step colder plugs, Hypertech tune, Autotech HPFP internals, Stock BPV (works perfectly), Yokohama Advan Neova AD08R's (stock size on stock rims); Hawk HPS pads; SURE RMM; Grimmspeed EBCS (2 port mode), Bilstein B6's, SPC rear camber arms. |
| | |
![]() | | #185 | ![]() |
![]() Join Date: Mar 2014
Posts: 108
(View Stats)
iTrader: (0)
Rep Power: 0 ![]() ![]() ![]() ![]() ![]() ![]() Thanks: 6
Thanked 13 Times in 7 Posts
Groans: 0
Groaned at 29 Times in 13 Posts
| Not Ranked : 0 score 105 k miles on stock clutch,engine. Bolted and tuned with 170psi compression all across. Now the big question is, should i go big turbo? Sent from my LG-H812 using Tapatalk
__________________ mods: -cobb ap v3 -CS SRI/TIP -CPE HPFP |
| | |
![]() | | #186 | ![]() |
![]() Join Date: Jun 2008 Location: Midwest
Posts: 575
(View Stats)
iTrader: (2)
Rep Power: 0 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Thanks: 477
Thanked 311 Times in 189 Posts
Groans: 0
Groaned at 1 Time in 1 Post
| Not Ranked : 0 score
Yes. Think carefully about your goals. I am quite happy with my BNRS3v2. With my older car and engine, I think I made my best choice. If you want to cross the 400whp barrier, you will need to put more into suspension and tires so as to not just spin in 3rd gear, and you would want to go to probably a GTX29xx series, and will also want auxiliary fueling. The BNRS3 is awesome if you are not planning on getting that complex. The new S4 sounds pretty good, but will have more lag. I don't think I would want to wait another 500rpm for full boost, but that's me - and if you spend enough, you can make better too. At the least, I can say I am exceedingly happy that I did not just stay with my K04.
__________________ 2007 Sunlight Silver MazdaSpeed3 Sport | BNR S3v2 | Autotech Internals | Cobb TIH | 3BAR MAP Sensor | Denso itv-22's | MSCAI | ETS 3.5" TMIC | Synchronic DV | Stratified EBCS | Guardian Angel | UR Test Pipe | Cobb AP | Koni Yellows | JBR RMM | CORN YEAH! | 265,000m | Tuned by STRATIFIED!!! To install: CPE SafeSeals 2012 Velocity Red MazdaSpeed3 w/Tech | Autotech Internals | Sure Aeros V2 | 98,000m | |
| | |
![]() | | #187 | ![]() |
![]() Join Date: Mar 2014
Posts: 108
(View Stats)
iTrader: (0)
Rep Power: 0 ![]() ![]() ![]() ![]() ![]() ![]() Thanks: 6
Thanked 13 Times in 7 Posts
Groans: 0
Groaned at 29 Times in 13 Posts
| Not Ranked : 0 score
Sent from my LG-H812 using Tapatalk
__________________ mods: -cobb ap v3 -CS SRI/TIP -CPE HPFP | |
| | |
![]() | | #188 | ![]() |
![]() Join Date: Jun 2008 Location: Midwest
Posts: 575
(View Stats)
iTrader: (2)
Rep Power: 0 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Thanks: 477
Thanked 311 Times in 189 Posts
Groans: 0
Groaned at 1 Time in 1 Post
| Not Ranked : 0 score
I wouldn't. Your choice of course, and I wish you the best of success, but the temptation of what sounds like reserve power for the future will leave you with more lag. I have both my 07 with the BNR and a 2012 that is still stock, and I go back and forth between them regularly. I would definitely not want the extra lag. You can get more power with the GTX29 series, with little lag because of a ball-bearing billet aluminum setup. I think I t would be worth the extra to do it right if you want the headroom. I suggest you talk with @lex about your options. Do you have E85 available?
__________________ 2007 Sunlight Silver MazdaSpeed3 Sport | BNR S3v2 | Autotech Internals | Cobb TIH | 3BAR MAP Sensor | Denso itv-22's | MSCAI | ETS 3.5" TMIC | Synchronic DV | Stratified EBCS | Guardian Angel | UR Test Pipe | Cobb AP | Koni Yellows | JBR RMM | CORN YEAH! | 265,000m | Tuned by STRATIFIED!!! To install: CPE SafeSeals 2012 Velocity Red MazdaSpeed3 w/Tech | Autotech Internals | Sure Aeros V2 | 98,000m | |
| | |
![]() | | #189 | ![]() |
![]() Join Date: Mar 2014
Posts: 108
(View Stats)
iTrader: (0)
Rep Power: 0 ![]() ![]() ![]() ![]() ![]() ![]() Thanks: 6
Thanked 13 Times in 7 Posts
Groans: 0
Groaned at 29 Times in 13 Posts
| Not Ranked : 0 score
Sent from my LG-H812 using Tapatalk
__________________ mods: -cobb ap v3 -CS SRI/TIP -CPE HPFP | |
| | |
![]() | | #190 | ![]() |
![]() Join Date: Jun 2008 Location: Midwest
Posts: 575
(View Stats)
iTrader: (2)
Rep Power: 0 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Thanks: 477
Thanked 311 Times in 189 Posts
Groans: 0
Groaned at 1 Time in 1 Post
| Not Ranked : 0 score
Just don't go with a cheap kit. I may yet add it, if I want to push the envelope on my old runner. Good luck! Keep us all posted! And find a good mechanic friend with tons of tools and patience. That's what I did.
__________________ 2007 Sunlight Silver MazdaSpeed3 Sport | BNR S3v2 | Autotech Internals | Cobb TIH | 3BAR MAP Sensor | Denso itv-22's | MSCAI | ETS 3.5" TMIC | Synchronic DV | Stratified EBCS | Guardian Angel | UR Test Pipe | Cobb AP | Koni Yellows | JBR RMM | CORN YEAH! | 265,000m | Tuned by STRATIFIED!!! To install: CPE SafeSeals 2012 Velocity Red MazdaSpeed3 w/Tech | Autotech Internals | Sure Aeros V2 | 98,000m | |
| | |
![]() | | #191 | ![]() |
![]() Join Date: Mar 2014
Posts: 108
(View Stats)
iTrader: (0)
Rep Power: 0 ![]() ![]() ![]() ![]() ![]() ![]() Thanks: 6
Thanked 13 Times in 7 Posts
Groans: 0
Groaned at 29 Times in 13 Posts
| Not Ranked : 0 score
Sent from my LG-H812 using Tapatalk
__________________ mods: -cobb ap v3 -CS SRI/TIP -CPE HPFP | |
| | |
![]() | | #192 | ![]() |
![]() Join Date: Nov 2009 Location: Pensacola FL
Posts: 2,039
(View Stats)
iTrader: (0)
Rep Power: 0 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Thanks: 659
Thanked 1,627 Times in 850 Posts
Groans: 3
Groaned at 5 Times in 5 Posts
| Not Ranked : 0 score 197k * Highest mileage Gen2 in the world *
__________________ 2010 BM MS3 BNR S3 HTP 3" Intake(Granny Smith Green PC) CS RP Ebay DP Res Delete JBR shift kit Fully JBR mounted Turbosmart BPV DDM 6K Lows 3K fogs H&R Springs CS RSB CXRacing FMIC AT Internals DIY PnP IM w/ VTCS delete. CS OCC Stratified 3port EBCS HTP Batt Tray Bosch 3bar MAP SS brake lines Works emotions cr-kai 18x7.5 ventus v12s for the street TRM C3s 17x9 Hankook RS3s for track days ![]() STRATIFIED TUNED Other Mazdas in my stable 2010 VR MS3 Wifes Ride ETS TMIC JBR RSB JBR SSP JBR knob AT internals 1999 Miata gtx2867 1.9L VVT built like a brick shithouse 2001 Miata LS RB FSB Hawk HP+ pads Dunlop ZII | |
| | |
| The Following 3 Users Say Thank You to beachshoer For This Useful Post: |
![]() | | #193 | ![]() |
![]() Join Date: Mar 2008 Location: Navarre, FL
Posts: 8,057
(View Stats)
iTrader: (9)
Rep Power: 4957 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Thanks: 5,585
Thanked 9,466 Times in 2,601 Posts
Groans: 370
Groaned at 171 Times in 143 Posts
| Not Ranked : 0 score I read that in a Jeremy Clarkson voice. Highest mileage Genpu.........in the world. |
| | |
| The Following User Says Thank You to aaronc7 For This Useful Post: | 802MS3 (11-11-2015) |
![]() | | #194 | ![]() |
![]() Join Date: Nov 2009 Location: Hudson, NY
Posts: 26
(View Stats)
iTrader: (0)
Rep Power: 0 ![]() ![]() ![]() ![]() ![]() Thanks: 10
Thanked 9 Times in 7 Posts
Groans: 0
Groaned at 0 Times in 0 Posts
| Not Ranked : 0 score Does 207089 count as high mileage? No significant mods, the turbo was replaced under warranty at 60K, original cultch, still get 24-25mpg. The biggest maintenance items have been tires, brakes, and wheel bearing. It has developed an oil consumption problem lately. |
| | |
![]() | | #195 | ![]() |
![]() Join Date: May 2009 Location: Gainesville, GA
Posts: 380
(View Stats)
iTrader: (4)
Rep Power: 0 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Thanks: 175
Thanked 372 Times in 201 Posts
Groans: 0
Groaned at 1 Time in 1 Post
| Not Ranked : 0 score 229,780 miles on orginal clutch and engine. Turbo was replaced at 130,000 with a gtx3071r. Key is religious maintenance. Every 3k oil change with full synthetics and all other fluids changed once a year. Went to the strip with it yesterday and banged out a 13.6. Not bad for a heavy 4 door sedan.
__________________ 2006 MS6- GTX3071R, Freek Tuned, HKS BOV, Grimmspeed EBCS, Autotech internals, CP-e TMIC, Ebay downpipe, Matt Damond Catch Can, Densos ITV-22, HTP 3" Intake and TIP, Cobb AP v3, EGR delete, Throttle body coolant bypass, JBR 80 Duro RMM, JBR 80 Duro PMM, Devils own Stage 2 70/30 Meth, CP-e Safe Seals, Koni Yellows. 13.6 1/4 time on self tuned GTX3071r, still tuning in process. 383hp on dynojet with 198,000 miles on original clutch and original engine!!!!!!!! Freektune for the win!! Last edited by sriser66; 11-15-2015 at 07:06 PM. |
| | |
![]() | | #196 | ![]() |
![]() Join Date: Nov 2009 Location: Vancouver, Canada
Posts: 229
(View Stats)
iTrader: (0)
Rep Power: 0 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Thanks: 13
Thanked 77 Times in 45 Posts
Groans: 1
Groaned at 1 Time in 1 Post
| Not Ranked : 0 score Are you guys talking mileage or kilometers?
__________________ COBB AP : JBR 3 Inch Full Intake : CORKSPORT TMIC : AUTOTECH INTERNALS : JBR SSP CPE Full RMM : Cobb Catted DOWNPIPE : BNR S3 : KW V1 Coilovers : Klutch SL18 Rims Guardian Angel : Stratified 3 Port : Michelin PSS 235/40/18 : SNOW PERFORMANCE : E85 Stratified Tune |
| | |
![]() | | #197 | ![]() |
![]() Join Date: May 2009 Location: Gainesville, GA
Posts: 380
(View Stats)
iTrader: (4)
Rep Power: 0 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Thanks: 175
Thanked 372 Times in 201 Posts
Groans: 0
Groaned at 1 Time in 1 Post
| Not Ranked : 0 score Miles for me. Fixed
__________________ 2006 MS6- GTX3071R, Freek Tuned, HKS BOV, Grimmspeed EBCS, Autotech internals, CP-e TMIC, Ebay downpipe, Matt Damond Catch Can, Densos ITV-22, HTP 3" Intake and TIP, Cobb AP v3, EGR delete, Throttle body coolant bypass, JBR 80 Duro RMM, JBR 80 Duro PMM, Devils own Stage 2 70/30 Meth, CP-e Safe Seals, Koni Yellows. 13.6 1/4 time on self tuned GTX3071r, still tuning in process. 383hp on dynojet with 198,000 miles on original clutch and original engine!!!!!!!! Freektune for the win!! |
| | |
![]() | | #198 | ![]() |
![]() Join Date: Jan 2015 Location: Holden Louisiana
Posts: 371
(View Stats)
iTrader: (0)
Rep Power: 0 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Thanks: 182
Thanked 155 Times in 94 Posts
Groans: 6
Groaned at 2 Times in 2 Posts
| Not Ranked : 0 score
__________________ 2012 MS3 VRM/w Tech Self Tuned BNR S4/SP63 4032 88mm pistons/Manley Rods/Power XS Manifold/JBR BSD with Baffle Plate/Cobb APv3/Cobb XLE BPV/CMGS Stg2 w/DO14/CPE TMIC/Autotech HPFP internals/JBR Tru-3 Intake/JBR Boost tubes/JBR EGR delete/Custom 1liter OCC/CPE xflex RMM/CPE Injector Seals/Eibach Pro Springs/Ebay Downpipe/Custom 3" TBE with Vibrant Resonator/Magnaflow Muffler/TB Coolant Bypass/Bosch 3 bar map/ACT 6 puck/GS EBCS 3port interrupt/SP63 VC breather Plugs-NGK LTR7IX-11(6510) Oil-RP 10/30 Tires-235 40 18 Federal 595 rsrr Brakes-EBC Yellow pads with ATE 200 fluid Check out my wheelwell page here. If your a member hit me up. https://www.wheelwell.com/profile/558b073762d1852928f23712/garage/ | |
| | |
![]() | | #199 | ![]() |
![]() Join Date: Jan 2015 Location: Fort Worth, TX
Posts: 745
(View Stats)
iTrader: (2)
Rep Power: 0 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Thanks: 289
Thanked 200 Times in 140 Posts
Groans: 2
Groaned at 44 Times in 12 Posts
| Not Ranked : 0 score 86k miles on mine. I might have the highest mileage 13'
__________________ 2013 VRM MS3 Freektuned--BNRS3--HTP 3" Sri--COBB apv3 & springs--CPE catted dp & safe seals--TS dual bov--AT hpfp internals--CFM rmm--JBR pmm, tmm, ssb, ebcs, TIGs, full egr delete, rsb & fmic piping/tr6--DM occ--CS cbe & ssp--SPC camber arms--Bosch 3Bar map--RA mudflaps Ambit RE82 18x9.5 +38 255/35 -v8 swap in progress- 1994 Miata DGR coilovers-Hard Dog Rollbar-STR 506 15x7.5 +15 -Sold- 2003 Protegé5 w/Hiboost turbo kit ihi vf22 turbo 5 speed -Sold- 89' FC Rx7 vert S5 13B turbo swapped |
| | |
![]() | | #200 | ![]() |
![]() Join Date: Nov 2011 Location: Crowley, TX
Posts: 1,803
(View Stats)
iTrader: (2)
Rep Power: 0 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Thanks: 1,624
Thanked 1,281 Times in 707 Posts
Groans: 24
Groaned at 5 Times in 5 Posts
| Not Ranked : 0 score You 200k guys give me hope! (incl. 197k beachshoer) |
| | |
![]() |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Approaching 1000 miles on built engine | JumpingJackson | MazdaSpeed 3 - Engine, Transmission & Driveline | 4 | 03-21-2010 12:01 PM |
| MS 3 original body kit | 0001 | MazdaSpeed 3/6 - Wheels & Tires | 1 | 09-20-2009 06:40 AM |
| Wanted-- MS 3 original body kit | 0001 | MazdaSpeed 3/6 - Appearance | 0 | 09-20-2009 04:17 AM |
| Mazda 3 Speed 5 Door Needs / Blown Engine 14K miles | kingpin748 | Mazdaspeed3/6 General Discussion | 12 | 03-13-2009 10:01 AM |