Who Makes MS3 EWG Dump Tubes / Pipes?
 

with all this additional power to be had with a properly setup EWG I haven't seen many pictures or references to an EWG dump tube or pipe. Who sells them or are you having them custom fabricated for your application? Exhaust gases are hot especially when they are coming straight out from your exhaust manifold let alone an upgraded one.

pretty much all fabbed up. the only EWG gasses control i have seen solved by the company is RR. and we all saw how they have been on delivery with their kits..

you can buy some pipe from ebay and bring it with you to a fabricator and have them weld what you want. search for the WG size/brand/model ect and there wlll probably be some close to what you need for ~ $20.

dane pretty much summed it up but another option is to have an exhaust shop build the dump tube because they will most likely have the piping necessary to fabricate the dump tube. this way you dont have to deal with the hassle of getting your own pipe.

Hmmm...

Thanks for the replies! I just figured that there would be dump tubes/pipes offered from manifold makers that offer v-band/two port EWG ports on their manifolds seeing as how most down pipes are shaped about the same (for the ms3 and ms6 respectively) and only the manifold maker would know where the wastegate would sit and how to route the dump tube/pipe if they buy a wastegate as well with the manifold.