register gallery
 

Go Back   Mazdaspeed Forums >
MAZDASPEED SECTION
>
Mazdaspeed 3/6 MZR Gen1 Forums (2006-2009)
> MazdaSpeed 3/6 - Turbo Induction

MazdaSpeed 3/6 - Turbo Induction MazdaSpeed 3/6 - Turbo Induction - Have a turbo, intercooler, downpipe question? Anything turbo related belongs here!


Welcome to Mazdaspeed Forums .

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact contact us.

*When you join MSF as a registered user, there will be No Ads.

*Registered Members get access to the Off Topic Area of the Forum

*Registered Members have an opportunity to upgrade their accounts to VIP, which brings a host of goddies for supporting MSF such as Raffles, Additional Forum Access, More PM Storage, The ability to upload more Images and many other enhancements.

*Registered members also get access to the live chat box!
Reply
 
Bookmark and Share LinkBack Thread Tools Search this Thread Display Modes
 Old 01-06-2014, 03:06 PM   #1
 
PapaSmurf's Avatar
 
Join Date: May 2010
Location: Homestead, FL
Posts: 8,236   (View Stats)
iTrader: (2)
Rep Power: 0
PapaSmurf is the leader of the worldPapaSmurf is the leader of the worldPapaSmurf is the leader of the worldPapaSmurf is the leader of the worldPapaSmurf is the leader of the worldPapaSmurf is the leader of the worldPapaSmurf is the leader of the worldPapaSmurf is the leader of the worldPapaSmurf is the leader of the worldPapaSmurf is the leader of the worldPapaSmurf is the leader of the world
Thanks: 6,375
Thanked 13,233 Times in 4,775 Posts
Groans: 112
Groaned at 61 Times in 35 Posts
(Thread Starter)
Not Ranked  0 score     
Default Aftermarket Turbo Flow Rates - Informational List

Pretty sure we dont have one of these on our forums, since people are going bigger and bigger on a daily basis I think it would be nice for people to know were their turbo stands/flows etc.

Their is obviously some turbos we use here that are missing if anyone has the numbers for them.

Stock K04..........?
BNR S3 K04.............?
GTX2867R.........?

etc etc

Maybe a sticky somewhere? @Raider; @doubleflusher;



Holset HX27...............38lb/min
TD05 16G..................38lb/min
E9 71........................41lb/min
TT S204....................42lb/min
E9 80.......................44lb/min
Borg EFR 6258..........44lb/min
TT S209....................45lb/min
GT2871R...................45lb/min
FP White...................47lb/min
FP Green Gen 1..........47lb/min
BBK Lite....................47lb/min
Tomei ARMS..............48lb/min
Holset H1C................49lb/min
GT3071R...................50lb/min
PT 5341 CEA...............50lbs/min
BBK Full....................51lb/min
GTII HKS 7460R..........51lb/min
Blouch D2..................52 lbs/min
Holset H1E...................52-65lb/min depending on the version
Holset HX35 8 blade......52lb/min
Borg EFR 6758.............53lb/min
TT S205....................53lb/min
TT S214....................53lb/min
Holset HX30................54lb/min
FP Green 73HTA..........54lb/min
GT3076R...................54lb/min
Evo-760XTR...............55lb/min
Borg EFR 7064...........56lb/min
GTX3071R.................56lb/min
TT S205b..................56lb/min
TT S214b..................56lb/min
Holset HY35...............57lb/min
BBK-B.......................57lb/min
PT 5857....................57lb/min
FP HTA 3076..............59lb/min
FP HTA 3576..............59lb/min
Holset Hx35/40 Hybrid...60lb/min
Holset WH1E................60lb/min
Holset HX35 7 blade.....60lb/min
Holset HY35/HE341......60lb/min
Holset WH1C .............60lb/min
FP Red HTA................60lb/min
Borg EFR 7163..........60lb/min
Borg EFR 7670............64lb/min
GTX3076R.................65lb/min
GTX3576R.................65lb/min
GT3582R...................67lb/min
Holset HE351cw..........67lb/min
FP Black 82HTA..........68lb/min
Borg 300sx 8375........ 68lb/min
FP HTA 3582.............68lb/min
Holset Super 40..........70lb/min
GT4088R...................72lb/min
GTX3582R.................73lb/min
PT 6262....................74lb/min
GT3788R...................75lb/min
FP HTA 3586.............75lb/min
FP HTA 3786.............75lb/min
TO4Z.......................75lb/min
GT4067R...................75lb/min
Borg 300sx 8875.........75lb/min
Borg EFR 8374............79lb/min
FP HTA 3788..............80lb/min
Holset HX50 ...............80lb/min
Holset HE451.............80lb/min
GT4094R...................80lb/min
Borg S366R................80lb/min
GT4294R...................85lb/min
Holset HX52 Cast........89lb/min
Holset HY55...............89lb/min
FP HTA 3794.............90lb/min
PT6466 CEA...............90lb/min
PT6766 CEA...............93lb/min
Borg EFR 9180............94lb/min
GT4202R...................95lb/min
FP4294 HTA JB..........95lb/min
FP SUPER94 HTA.........95lb/min
Holset HX52 Billet.........99lb/min
FP SUPER99 HTA.........103lb/min
FP4205 HTA JB...........115lb/min
Holset HX60................126lb/min
Holset HX80/82...........199lb/min
__________________
Precision 6466, Golden Eagle Sleeves, Headgames Motorworks Head
Fastest ET: 11.776 @ 123.161(35r setup, 7000ft DA, 450hp uncorrected)
3M Matte Blue Metallic Wrapped
860whp/677wtq

2016 Ford F150, XLT, 4x4 Supercrew
2.7 V6 Ecoboost

Last edited by PapaSmurf; 02-04-2014 at 07:20 AM. Reason: I added a few
PapaSmurf is offline   Reply With Quote
The Following 18 Users Say Thank You to PapaSmurf For This Useful Post:
06Speed6 (02-03-2014), amoosenamedhank (01-06-2014), atvfreek (02-04-2014), bioevolve (01-07-2014), breakfstincluded (01-07-2014), Cheapspeed (01-06-2014), daafisch (02-04-2014), doubleflusher (01-07-2014), hihosilver (01-06-2014), jm211 (01-06-2014), Mauro_Penguin (01-07-2014), Mazdazilla6 (01-07-2014), Realgib3 (01-06-2014), Roddiy (01-07-2014), Sasuke-kun (02-02-2019), sidekick (01-06-2014), thricestrat (01-31-2014), WetzMS3 (04-16-2014)
 Old 01-07-2014, 08:33 AM   #2
 
doubleflusher's Avatar
 
Join Date: Feb 2009
Posts: 20,650   (View Stats)
iTrader: (35)
Rep Power: 151848
doubleflusher has disabled reputation
Thanks: 55,993
Thanked 302,953 Times in 13,565 Posts
Groans: 1,443
Groaned at 329 Times in 304 Posts
Not Ranked  0 score     
Default

I added a few big FP's and corrected a few others.
__________________
Evo VIII - 9.93 @ 150.05 - CAI and LEDs

Beanfab / Tuned by Nishan
doubleflusher is offline   Reply With Quote
The Following 3 Users Say Thank You to doubleflusher For This Useful Post:
atvfreek (02-04-2014), PapaSmurf (01-07-2014), Realgib3 (01-07-2014)
 Old 01-07-2014, 08:55 AM   #3
 
PapaSmurf's Avatar
 
Join Date: May 2010
Location: Homestead, FL
Posts: 8,236   (View Stats)
iTrader: (2)
Rep Power: 0
PapaSmurf is the leader of the worldPapaSmurf is the leader of the worldPapaSmurf is the leader of the worldPapaSmurf is the leader of the worldPapaSmurf is the leader of the worldPapaSmurf is the leader of the worldPapaSmurf is the leader of the worldPapaSmurf is the leader of the worldPapaSmurf is the leader of the worldPapaSmurf is the leader of the worldPapaSmurf is the leader of the world
Thanks: 6,375
Thanked 13,233 Times in 4,775 Posts
Groans: 112
Groaned at 61 Times in 35 Posts
(Thread Starter)
Not Ranked  0 score     
Default

I added what I could find on the GT2871 and GTX2867.

Anyone know where you can find K04, BNR Stage 2-3 info?

BNR website is blocked here at work and isnt iphone friendly haha.
__________________
Precision 6466, Golden Eagle Sleeves, Headgames Motorworks Head
Fastest ET: 11.776 @ 123.161(35r setup, 7000ft DA, 450hp uncorrected)
3M Matte Blue Metallic Wrapped
860whp/677wtq

2016 Ford F150, XLT, 4x4 Supercrew
2.7 V6 Ecoboost
PapaSmurf is offline   Reply With Quote
 Old 01-07-2014, 09:22 AM   #4
 
Mazdazilla6's Avatar
 
Join Date: Mar 2012
Location: Warrenville, IL/Big Rapids, MI
Posts: 3,657   (View Stats)
iTrader: (8)
Rep Power: 0
Mazdazilla6 is the leader of the worldMazdazilla6 is the leader of the worldMazdazilla6 is the leader of the worldMazdazilla6 is the leader of the worldMazdazilla6 is the leader of the worldMazdazilla6 is the leader of the worldMazdazilla6 is the leader of the worldMazdazilla6 is the leader of the worldMazdazilla6 is the leader of the worldMazdazilla6 is the leader of the worldMazdazilla6 is the leader of the world
Thanks: 3,349
Thanked 4,687 Times in 1,836 Posts
Groans: 0
Groaned at 21 Times in 14 Posts
Not Ranked  0 score     
Default

Here's EFR I don't see listed.

Borg EFR 6258..........44lb/min
Borg EFR 6758..........53lb/min
Borg EFR 7064..........56lb/min
Borg EFR 7163..........60lb/min

Also I don't flow rates on BNR's website but the s3 uses a gt28 chra and a 2871 comp wheel. And s1 uses only gt28 chra. But they have machined housings so that may bump rates up a bit.
__________________
Built 5862: Shootin For The Stars

2006 Mazdaspeed6 GT Crystal White Pearl #07141

Damond Motorsports = PS Cooler - RMM - PMM - OCC
VersaTuner = Versatune
Clutchmasters = 850 Street Twindisk
Corksport = RDM - CBE - RSB - TMM Insert
Turbine Tech = Forward Diff Mount - FMM
CP-e = Exhaust Manifold - Injector Seals
PTE = JB 5862
JMF = Intake Manifold w/Custom PI
Kozmic = Downpipe - 6th Port - EGR Delete
Forge = V2 BPV
Tial = 44mm WG
Autotech = HPFP Internals
HTP = 4" Intake - Battery Tray
Bilstein = B6 Shocks w/Eibach springs
Grimmspeed = EBCS
Technafit = SS Brake Lines - SS Clutch Line
Enkei = EVOX GSR 18x8.5 +38 - NT03+M 17x9.5 +38
Custom = FMIC w/TR1035 - Shifter Cables - Shifter Bushings
Mazdazilla6 is offline   Reply With Quote
The Following User Says Thank You to Mazdazilla6 For This Useful Post:
PapaSmurf (01-07-2014)
 Old 01-07-2014, 09:28 AM   #5
 
PapaSmurf's Avatar
 
Join Date: May 2010
Location: Homestead, FL
Posts: 8,236   (View Stats)
iTrader: (2)
Rep Power: 0
PapaSmurf is the leader of the worldPapaSmurf is the leader of the worldPapaSmurf is the leader of the worldPapaSmurf is the leader of the worldPapaSmurf is the leader of the worldPapaSmurf is the leader of the worldPapaSmurf is the leader of the worldPapaSmurf is the leader of the worldPapaSmurf is the leader of the worldPapaSmurf is the leader of the worldPapaSmurf is the leader of the world
Thanks: 6,375
Thanked 13,233 Times in 4,775 Posts
Groans: 112
Groaned at 61 Times in 35 Posts
(Thread Starter)
Not Ranked  0 score     
Default

Originally Posted by Mazdazilla6 View Post
Here's EFR I don't see listed.

Borg EFR 6258..........44lb/min
Borg EFR 6758..........53lb/min
Borg EFR 7064..........56lb/min
Borg EFR 7163..........60lb/min

Also I don't flow rates on BNR's website but the s3 uses a gt28 chra and a 2871 comp wheel. And s1 uses only gt28 chra. But they have machined housings so that may bump rates up a bit.
updated.

thanks.
__________________
Precision 6466, Golden Eagle Sleeves, Headgames Motorworks Head
Fastest ET: 11.776 @ 123.161(35r setup, 7000ft DA, 450hp uncorrected)
3M Matte Blue Metallic Wrapped
860whp/677wtq

2016 Ford F150, XLT, 4x4 Supercrew
2.7 V6 Ecoboost
PapaSmurf is offline   Reply With Quote
 Old 01-07-2014, 09:31 AM   #6
Lex
Engineered Tuning

 
Lex's Avatar
 
Join Date: Jun 2008
Location: Vancouver, Canada
Posts: 12,653   (View Stats)
iTrader: (6)
Rep Power: 12033
Lex is the leader of the worldLex is the leader of the worldLex is the leader of the worldLex is the leader of the worldLex is the leader of the worldLex is the leader of the worldLex is the leader of the worldLex is the leader of the worldLex is the leader of the worldLex is the leader of the worldLex is the leader of the world
Thanks: 6,485
Thanked 23,371 Times in 6,959 Posts
Groans: 13
Groaned at 44 Times in 38 Posts
Not Ranked  0 score     
Default

Where are these flow rates taken from on the map and at what temperature and pressure?

Are they taken from the edge of the last island? I took a quick peek and saw that for example the Garrett 28 frame turbos are underrated.
__________________

We Engineer, and that's better than just tuning!



www.stratifiedauto.com
COBB AP and VersaTuner Custom Tuning. Guardian Angel Protection and Boost Control.
Lex is offline   Reply With Quote
The Following User Says Thank You to Lex For This Useful Post:
Mauro_Penguin (01-07-2014)
 Old 01-07-2014, 10:03 AM   #7
 
PapaSmurf's Avatar
 
Join Date: May 2010
Location: Homestead, FL
Posts: 8,236   (View Stats)
iTrader: (2)
Rep Power: 0
PapaSmurf is the leader of the worldPapaSmurf is the leader of the worldPapaSmurf is the leader of the worldPapaSmurf is the leader of the worldPapaSmurf is the leader of the worldPapaSmurf is the leader of the worldPapaSmurf is the leader of the worldPapaSmurf is the leader of the worldPapaSmurf is the leader of the worldPapaSmurf is the leader of the worldPapaSmurf is the leader of the world
Thanks: 6,375
Thanked 13,233 Times in 4,775 Posts
Groans: 112
Groaned at 61 Times in 35 Posts
(Thread Starter)
Not Ranked  0 score     
Default

Originally Posted by Lex View Post
Where are these flow rates taken from on the map and at what temperature and pressure?

Are they taken from the edge of the last island? I took a quick peek and saw that for example the Garrett 28 frame turbos are underrated.
im pretty sure its taken from the turbo being in its max efficiency.

so yes edge of the last island/line etc on the compressor map.
__________________
Precision 6466, Golden Eagle Sleeves, Headgames Motorworks Head
Fastest ET: 11.776 @ 123.161(35r setup, 7000ft DA, 450hp uncorrected)
3M Matte Blue Metallic Wrapped
860whp/677wtq

2016 Ford F150, XLT, 4x4 Supercrew
2.7 V6 Ecoboost
PapaSmurf is offline   Reply With Quote
 Old 01-07-2014, 10:26 AM   #8
Lex
Engineered Tuning

 
Lex's Avatar
 
Join Date: Jun 2008
Location: Vancouver, Canada
Posts: 12,653   (View Stats)
iTrader: (6)
Rep Power: 12033
Lex is the leader of the worldLex is the leader of the worldLex is the leader of the worldLex is the leader of the worldLex is the leader of the worldLex is the leader of the worldLex is the leader of the worldLex is the leader of the worldLex is the leader of the worldLex is the leader of the worldLex is the leader of the world
Thanks: 6,485
Thanked 23,371 Times in 6,959 Posts
Groans: 13
Groaned at 44 Times in 38 Posts
Not Ranked  0 score     
Default

Above, the GT2871 is rated at 38 lbs/min.



As you can see in the image above that relates to the edge of the maximum efficiency island (76%) and not as much as the turbo can ultimately flow which is around 45 lbs.

We often run these turbos well past the middle island and make power with them well past that thanks for cooling from intercoolers, WMI, and DI.

If we could only run 38 lbs worth of air from this turbo we'd only be able to get around 330-340whp (at 18-19psi on our motors) from it and that's only true if using Cali 91 octane for example. That turbo is capable of 400whp with E85 or WMI and the correct flow parts.

While some turbos in the list are rated to the very edge of operation others are rated to the centre island and that makes the comparison difficult. I would definitely consult the full map before deciding on a turbo. The EFR 6258 for example flows about as much as the GT2871 so it either has to be rated at 35 lbs (centre island) or the Garrett has to be rated at 45 in the list. With our cars and half decent fuel and cooling we can definitely operated outside that centre island.

__________________

We Engineer, and that's better than just tuning!



www.stratifiedauto.com
COBB AP and VersaTuner Custom Tuning. Guardian Angel Protection and Boost Control.
Lex is offline   Reply With Quote
The Following User Says Thank You to Lex For This Useful Post:
PapaSmurf (01-07-2014)
 Old 01-07-2014, 10:38 AM   #9
 
PapaSmurf's Avatar
 
Join Date: May 2010
Location: Homestead, FL
Posts: 8,236   (View Stats)
iTrader: (2)
Rep Power: 0
PapaSmurf is the leader of the worldPapaSmurf is the leader of the worldPapaSmurf is the leader of the worldPapaSmurf is the leader of the worldPapaSmurf is the leader of the worldPapaSmurf is the leader of the worldPapaSmurf is the leader of the worldPapaSmurf is the leader of the worldPapaSmurf is the leader of the worldPapaSmurf is the leader of the worldPapaSmurf is the leader of the world
Thanks: 6,375
Thanked 13,233 Times in 4,775 Posts
Groans: 112
Groaned at 61 Times in 35 Posts
(Thread Starter)
Not Ranked  0 score     
Default

I took the ratings off different maps for the 2871, I can make the changes.

This is basically a list to compare the max flow rate of a turbo without any aftermarket cooling and on pump gas etc. Everything is going to be different from car to car and engine to engine etc.

Its just giving everyone a basic flow rate to go off of and see how each different turbo compares to each other.
__________________
Precision 6466, Golden Eagle Sleeves, Headgames Motorworks Head
Fastest ET: 11.776 @ 123.161(35r setup, 7000ft DA, 450hp uncorrected)
3M Matte Blue Metallic Wrapped
860whp/677wtq

2016 Ford F150, XLT, 4x4 Supercrew
2.7 V6 Ecoboost
PapaSmurf is offline   Reply With Quote
The Following User Says Thank You to PapaSmurf For This Useful Post:
Realgib3 (01-07-2014)
 Old 01-31-2014, 10:31 AM   #10
 
mazda_speed_6's Avatar
 
Join Date: Feb 2013
Location: nm
Posts: 84   (View Stats)
iTrader: (0)
Rep Power: 0
mazda_speed_6 is just really nicemazda_speed_6 is just really nicemazda_speed_6 is just really nicemazda_speed_6 is just really nice
Thanks: 33
Thanked 8 Times in 7 Posts
Groans: 0
Groaned at 1 Time in 1 Post
Not Ranked  0 score     
Default

No flow rate for the bnr stg 3? i would think it would flow almost as much as the gt2871r maybe a bit lower as the bnr has a almost stock size inlet and the gt2871r has a 4" inlet, some one correct me if im wrong on the inlet size of the gtx2871r.
__________________
2006 MS6 sri/tbe/cpe diff mount/TS bpv/AT internals/jbr motor mounts/COBB acessport/stratified ots map/act 6 puck
mazda_speed_6 is offline   Reply With Quote
 Old 01-31-2014, 10:44 AM   #11
Lex
Engineered Tuning

 
Lex's Avatar
 
Join Date: Jun 2008
Location: Vancouver, Canada
Posts: 12,653   (View Stats)
iTrader: (6)
Rep Power: 12033
Lex is the leader of the worldLex is the leader of the worldLex is the leader of the worldLex is the leader of the worldLex is the leader of the worldLex is the leader of the worldLex is the leader of the worldLex is the leader of the worldLex is the leader of the worldLex is the leader of the worldLex is the leader of the world
Thanks: 6,485
Thanked 23,371 Times in 6,959 Posts
Groans: 13
Groaned at 44 Times in 38 Posts
Not Ranked  0 score     
Default

Originally Posted by mazda_speed_6 View Post
No flow rate for the bnr stg 3? i would think it would flow almost as much as the gt2871r maybe a bit lower as the bnr has a almost stock size inlet and the gt2871r has a 4" inlet, some one correct me if im wrong on the inlet size of the gtx2871r.
The S3 does seem to flow a little less than a GT2871 but they are in the same ballpark.
__________________

We Engineer, and that's better than just tuning!



www.stratifiedauto.com
COBB AP and VersaTuner Custom Tuning. Guardian Angel Protection and Boost Control.
Lex is offline   Reply With Quote
The Following 2 Users Say Thank You to Lex For This Useful Post:
atvfreek (02-04-2014), mazda_speed_6 (01-31-2014)
 Old 01-31-2014, 11:31 AM   #12
 
mazda_speed_6's Avatar
 
Join Date: Feb 2013
Location: nm
Posts: 84   (View Stats)
iTrader: (0)
Rep Power: 0
mazda_speed_6 is just really nicemazda_speed_6 is just really nicemazda_speed_6 is just really nicemazda_speed_6 is just really nice
Thanks: 33
Thanked 8 Times in 7 Posts
Groans: 0
Groaned at 1 Time in 1 Post
Not Ranked  0 score     
Default

Originally Posted by Lex View Post
The S3 does seem to flow a little less than a GT2871 but they are in the same ballpark.
would the S3 flow enough for 330awhp/380awtq on 91oct? with my mod set up in my sig, i also plan on getting a cpe tmic and htp 3 inch intake when i replace my smoking ko4
__________________
2006 MS6 sri/tbe/cpe diff mount/TS bpv/AT internals/jbr motor mounts/COBB acessport/stratified ots map/act 6 puck
mazda_speed_6 is offline   Reply With Quote
 Old 02-03-2014, 06:34 PM   #13
Speeeeeed

 
06Speed6's Avatar
 
Join Date: Mar 2008
Location: Corpus Christi, Tx
Posts: 6,530   (View Stats)
iTrader: (24)
Rep Power: 7489
06Speed6 is the leader of the world06Speed6 is the leader of the world06Speed6 is the leader of the world06Speed6 is the leader of the world06Speed6 is the leader of the world06Speed6 is the leader of the world06Speed6 is the leader of the world06Speed6 is the leader of the world06Speed6 is the leader of the world06Speed6 is the leader of the world06Speed6 is the leader of the world
Thanks: 6,190
Thanked 14,562 Times in 2,807 Posts
Groans: 41
Groaned at 23 Times in 19 Posts
Not Ranked  0 score     
Default

I know that this is a aftermarket turbo thread and Holsets arent aftermarket, but if you want to add them in anyway here are a few:

Holset HX35 8 blade - 52lb/min
Holset HX35 7 blade - 60lb/min
Holset HY35/HE341 - 60lb/min
Holset WH1C - 60lb/min
Holset H1C - 49lb/min
Holset Hx35/40 Hybrid - 60lb/min
Holset Super 40 - 70lb/min
Holset WH1E - 60lb/min
Holset H1E - 52-65lb/min depending on the version
Holset HX52 Cast- 89lb/min
Holset HX52 Billet - 99lb/min
Holset HX50 - 80lb/min
Holset HE451 - 80lb/min
Holset HY55 - 89lb/min
Holset HX30 - 54lb/min
Holset HX27 - 38lb/min
Holset HY35 - 57lb/min
Holset HX60 - 126lb/min
Holset HX80/82 - 199lb/min
Holset HE351cw - 67lb/min
__________________
2006 Mazdaspeed 6

P&P, flow benched, head with welded EGR and +1mm inconel exhaust valves (260/200cfm @ .500"), Web Cams, Custom crankcase breather with integrated air/oil seperator, Custom 3/4" ID pan vac system, Blow through maf, Port matched IM, CNC AN-12 ORB block oil adapter, CP-e 88mm Stage 2 pistons, Pauter 22.5mm rods, ARP main, head, and crank studs, CP-e injector seals, Injector stud kit, Cometec 88mm 5 layer HG, Deatschworks flow tested matched injectors, DCR VVT, PTP 2250psi RV, Corksport front sway, Whiteline rear sway, AWR front/rear sway links, TT FMM, AWR 70d DMM, JBR 80D PMM, SU RMM, TT FRDM, CP-e RRDM, Autotech CDFP, DW65c ITFP, Custom L/A IC with a dual pass 20x25x1.5 heat exchanger, Dual Cobra I/C pumps, 2.5" ID 700hp I/A intercooler, Custom DP, Corksport catback, Corksport exhaust hangers, chrome plated genpu valve cover, chrome plated timing cover, Spin on oil filter, Fluidyne dual pass AN-12 oil cooler, Hayden oil cooler fan controller, Dual 4.7" SPAL oil cooler fans, Canton Racing 22-480 oil tstat, Custom BMRS AN-12 oil lines, SPC ball joints, 55w/35w headlights and independently switched fogs on custom waterproof harnesses, PIAA Super Plasma driving and interior lights, rear diff cutout switch, 3M clear front cover, Volk 17x7.5 wheels, Custom tcase bearing cap upgrade, GS EBC 3 port, Redline SS hood lift, Versatune, Defi gauges, Innovate MTX-L WB gauge, triple center gauge pod, Block8head dual vent pod, Redline shift boot & ebrake cover & arm rest cover, Mazdaspeed CF ebrake handle, SBC Full Face Feramic Clutch Disc, Dashawk, ACL rod bearings, King main bearings, Cosworth BSD, Custom windage tray, Holset HX35w, Creative Performance T3 EWG manifold, HKS VTA BOV, A1 H11 head studs, Hylomar HG sealant, SSP EGR delete plate, JBR EGR IM plug, JGS 40mm Race EWG


06Speed6 is offline   Reply With Quote
The Following User Says Thank You to 06Speed6 For This Useful Post:
PapaSmurf (02-04-2014)
 Old 02-04-2014, 06:51 AM   #14
 
PapaSmurf's Avatar
 
Join Date: May 2010
Location: Homestead, FL
Posts: 8,236   (View Stats)
iTrader: (2)
Rep Power: 0
PapaSmurf is the leader of the worldPapaSmurf is the leader of the worldPapaSmurf is the leader of the worldPapaSmurf is the leader of the worldPapaSmurf is the leader of the worldPapaSmurf is the leader of the worldPapaSmurf is the leader of the worldPapaSmurf is the leader of the worldPapaSmurf is the leader of the worldPapaSmurf is the leader of the worldPapaSmurf is the leader of the world
Thanks: 6,375
Thanked 13,233 Times in 4,775 Posts
Groans: 112
Groaned at 61 Times in 35 Posts
(Thread Starter)
Not Ranked  0 score     
Default

Originally Posted by 06Speed6 View Post
I know that this is a aftermarket turbo thread and Holsets arent aftermarket, but if you want to add them in anyway here are a few:

Holset HX35 8 blade - 52lb/min
Holset HX35 7 blade - 60lb/min
Holset HY35/HE341 - 60lb/min
Holset WH1C - 60lb/min
Holset H1C - 49lb/min
Holset Hx35/40 Hybrid - 60lb/min
Holset Super 40 - 70lb/min
Holset WH1E - 60lb/min
Holset H1E - 52-65lb/min depending on the version
Holset HX52 Cast- 89lb/min
Holset HX52 Billet - 99lb/min
Holset HX50 - 80lb/min
Holset HE451 - 80lb/min
Holset HY55 - 89lb/min
Holset HX30 - 54lb/min
Holset HX27 - 38lb/min
Holset HY35 - 57lb/min
Holset HX60 - 126lb/min
Holset HX80/82 - 199lb/min
Holset HE351cw - 67lb/min
updated, basically any turbo we use could use in the community... or any turbo at all ill throw up there.

Holset HX80/82 - 199lb/min...ummm is this a 18 wheeler turbo? haha that bitch flows!
__________________
Precision 6466, Golden Eagle Sleeves, Headgames Motorworks Head
Fastest ET: 11.776 @ 123.161(35r setup, 7000ft DA, 450hp uncorrected)
3M Matte Blue Metallic Wrapped
860whp/677wtq

2016 Ford F150, XLT, 4x4 Supercrew
2.7 V6 Ecoboost
PapaSmurf is offline   Reply With Quote
The Following 2 Users Say Thank You to PapaSmurf For This Useful Post:
06Speed6 (02-04-2014), Realgib3 (02-04-2014)
 Old 02-04-2014, 07:03 AM   #15
Speeeeeed

 
06Speed6's Avatar
 
Join Date: Mar 2008
Location: Corpus Christi, Tx
Posts: 6,530   (View Stats)
iTrader: (24)
Rep Power: 7489
06Speed6 is the leader of the world06Speed6 is the leader of the world06Speed6 is the leader of the world06Speed6 is the leader of the world06Speed6 is the leader of the world06Speed6 is the leader of the world06Speed6 is the leader of the world06Speed6 is the leader of the world06Speed6 is the leader of the world06Speed6 is the leader of the world06Speed6 is the leader of the world
Thanks: 6,190
Thanked 14,562 Times in 2,807 Posts
Groans: 41
Groaned at 23 Times in 19 Posts
Not Ranked  0 score     
Default

Any Holset that is 80lb/min or more is a 18 wheeler or tractor turbo, they are huge!

hx30 is on your list twice now
__________________
2006 Mazdaspeed 6

P&P, flow benched, head with welded EGR and +1mm inconel exhaust valves (260/200cfm @ .500"), Web Cams, Custom crankcase breather with integrated air/oil seperator, Custom 3/4" ID pan vac system, Blow through maf, Port matched IM, CNC AN-12 ORB block oil adapter, CP-e 88mm Stage 2 pistons, Pauter 22.5mm rods, ARP main, head, and crank studs, CP-e injector seals, Injector stud kit, Cometec 88mm 5 layer HG, Deatschworks flow tested matched injectors, DCR VVT, PTP 2250psi RV, Corksport front sway, Whiteline rear sway, AWR front/rear sway links, TT FMM, AWR 70d DMM, JBR 80D PMM, SU RMM, TT FRDM, CP-e RRDM, Autotech CDFP, DW65c ITFP, Custom L/A IC with a dual pass 20x25x1.5 heat exchanger, Dual Cobra I/C pumps, 2.5" ID 700hp I/A intercooler, Custom DP, Corksport catback, Corksport exhaust hangers, chrome plated genpu valve cover, chrome plated timing cover, Spin on oil filter, Fluidyne dual pass AN-12 oil cooler, Hayden oil cooler fan controller, Dual 4.7" SPAL oil cooler fans, Canton Racing 22-480 oil tstat, Custom BMRS AN-12 oil lines, SPC ball joints, 55w/35w headlights and independently switched fogs on custom waterproof harnesses, PIAA Super Plasma driving and interior lights, rear diff cutout switch, 3M clear front cover, Volk 17x7.5 wheels, Custom tcase bearing cap upgrade, GS EBC 3 port, Redline SS hood lift, Versatune, Defi gauges, Innovate MTX-L WB gauge, triple center gauge pod, Block8head dual vent pod, Redline shift boot & ebrake cover & arm rest cover, Mazdaspeed CF ebrake handle, SBC Full Face Feramic Clutch Disc, Dashawk, ACL rod bearings, King main bearings, Cosworth BSD, Custom windage tray, Holset HX35w, Creative Performance T3 EWG manifold, HKS VTA BOV, A1 H11 head studs, Hylomar HG sealant, SSP EGR delete plate, JBR EGR IM plug, JGS 40mm Race EWG



Last edited by 06Speed6; 02-04-2014 at 07:03 AM. Reason: MSF Database - Automerged Doublepost
06Speed6 is offline   Reply With Quote
The Following User Says Thank You to 06Speed6 For This Useful Post:
PapaSmurf (02-04-2014)
 Old 02-04-2014, 07:40 AM   #16
 
smoogs12's Avatar
 
Join Date: Feb 2011
Location: Waterford,CT
Posts: 7,731   (View Stats)
iTrader: (3)
Rep Power: 0
smoogs12 is the leader of the worldsmoogs12 is the leader of the worldsmoogs12 is the leader of the worldsmoogs12 is the leader of the worldsmoogs12 is the leader of the worldsmoogs12 is the leader of the worldsmoogs12 is the leader of the worldsmoogs12 is the leader of the worldsmoogs12 is the leader of the worldsmoogs12 is the leader of the worldsmoogs12 is the leader of the world
Thanks: 11,169
Thanked 6,794 Times in 3,106 Posts
Groans: 423
Groaned at 15 Times in 15 Posts
Not Ranked  0 score     
Default

Hx 82 next to an HE341(I think its comparable in size to a gt30?)...yeah..its huge

__________________
-Pat
2008 True Red MS3
GT3071R 'n Stuff
SOLD

1999 Jeep XJ
6.5" Lift | Armor | 33" Tires | Bumpers

1996 Jeep XJ
3.5" Lift | 31" GY Duratracs | Bumpers

1994 Miata
15x8's w/NT05's | KYB AGX | Hardog Roll Bar | 70D Engine Mounts
smoogs12 is offline   Reply With Quote
The Following 3 Users Say Thank You to smoogs12 For This Useful Post:
06Speed6 (02-04-2014), atvfreek (02-04-2014), PapaSmurf (02-04-2014)
 Old 06-29-2015, 03:35 PM   #17
 
2eatV8everyday's Avatar
 
Join Date: Sep 2012
Location: Escondido, CA
Posts: 302   (View Stats)
iTrader: (1)
Rep Power: 0
2eatV8everyday is the leader of the world2eatV8everyday is the leader of the world2eatV8everyday is the leader of the world2eatV8everyday is the leader of the world2eatV8everyday is the leader of the world2eatV8everyday is the leader of the world2eatV8everyday is the leader of the world2eatV8everyday is the leader of the world2eatV8everyday is the leader of the world2eatV8everyday is the leader of the world2eatV8everyday is the leader of the world
Thanks: 296
Thanked 282 Times in 131 Posts
Groans: 0
Groaned at 6 Times in 2 Posts
Not Ranked  0 score     
Default

Here is a listing of the above turbochargers along with additional turbochargers not listed. I found this a while back on the NASIOC forums, and have added to it slowly over time.
Attached Files
File Type: xlsx Listing of Turbochargers by Flow Rate.xlsx (18.9 KB, 51 views)
__________________
Stocked Out with my Cock out
2eatV8everyday is offline   Reply With Quote
The Following User Says Thank You to 2eatV8everyday For This Useful Post:
Hush (06-29-2015)
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Converting Injector Flow Rates ms3blackmica MazdaSpeed 3/6 - Fuel, Nitrous & Water Injection 7 09-18-2012 10:17 PM
Ms6 does anyone know stock spring rates and aftermarket rates? darkcherry MazdaSpeed 3/6 - Suspension & Brakes 7 12-16-2011 03:31 PM
Big Turbo Check list azokaei MazdaSpeed 3/6 - Big Turbo Builds 17 07-20-2011 03:15 PM
Gutted cat flow ~= SLP Loudmouth Resonator? Flow cant be hurt I dont think.. 08Anamoly MazdaSpeed 3 - Engine, Transmission & Driveline 6 03-04-2010 01:07 PM


All times are GMT -7. The time now is 12:46 PM.
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
SEO by vBSEO ©2011, Crawlability, Inc.
vB.Sponsors
Template-Modifications by TMS
©Copyright 2008 ; 2019 Cymru Internet Services LLC | FYHN™ Autosports HQ
Ad Management plugin by RedTyger
Page generated in 0.39475 seconds with 28 queries