11.41@127.50 !!!!!!!
 

Hi to everyone,
Last week we have drag race in my country at Tybaki Airport i made a lot of passes with my speed3 (14 passes) without any issue.My best time was 11.412@127.50 mp/h .I also make 4 times 11.5 that seems my car definately has the time.My best trap speed was on a pass 11.87@128.68 .

My car is nothing special a decent engine built ,full interior with 2 front light bucket seats,26/8.5.15 MH slicks ,4 oem injectors + direct meth 4 d03 nozzles and a gtx3071 at 30psi.

I`m open to your comments.......

in car view

outside view (poor video)


I also attach time sleeps have in mind that speed is at km/h

New fastest Speed 3 record???

I think , yes ..........!!!!!

Wow congrats!

On a 3071 look at you ..... Good shit , hopefully u won't catch too much hate because you're not in the US .... These guys over here like to keep "world records " confined to their backyard . U doing 100 mph in 8th and 127 ish in 1/4 .... Pretty Fucken spiffy man

What's your clutch set up by the way ?

GTX ftw. Good job man.

Sent from my SCH-I535 using Tapatalk

Nice!

USA lets step our game for Christ's sake LOL

The amazing 7.25 twin disk by clutch master ...

Good job! I need to take a ferry ride over to Greece. There aren't any drag strips here in Italy :(


Sent from my iPhone using Tapatalk

I knew this kid could drive.
Genwon ftw.

Congrats!
I know you have been working hard to hit your numbers and im glad it paid off.


And on a 3071 no less lol. Ths is awesome shit.

Now that came out of left field well done, who did the engine build and tuning.

@rfinkle2; @ms3blackmica;

Does that launch technique look familiar

The engine built was done from GTR racing & tuning

The ecu tuning was made from re-action engineering

damn, you got some skills man. Impressive. Congrats!

Can you specifie to me what you mean ?

Launching off the ebrake

Awesome work, I'm just hoping to hit low 13's when I go to the track next Saturday. I'm sure by the time i'm getting to 11's you'll already be working on your 9 second pass. Keep it up! :smokin:

http://i.imgur.com/gG8n5qx.png

Basically ^^^^ ..... Manifest destiny yo ...

συγχαρητήρια!!

Nice job, there can't be many Speed3s on Crete, must be cool to have such a unique car!

TIS

e-brake and launch controll seted at 4200rpm and activated till 18mp/h

Ευχαριστώ ..

The cool thing is that in my country Greece are very few speed3 about 40 cars...
In Crete i thnk there are 4-5 cars only ....

please add me to 11sec club....:)

some extra photos from the track ....

When do u get full power ? 2nd? Or 3rd? And how much dialed down are the first 2 gears ? (Assuming they are , or at least 1st )

I start the car with full power from 1st, but i use an electronic boost controller (greddy profec b)so i have set it at duty cycles it needs to hold the 30psi till redline,i also do not have reduced load at 1st or 2nd gear, so in the track at 1st hold about 17psi(because of a small spining) at 2nd gear holds about 24psi when i hook to 3rd then the 30psi makes there job ...

Straight ganstah then .... Very old skool of you .... Very nice man ... Great job , u certainly have enough to run a 10.9 as is if u start dialing in the car on the front half . That track any good for prep or they just sweep it and let u guys slip and slide ?

The track is a military airport that they rent it for weekend and make drag races, they put some glue for the first 80m-100m and thats all .....

Red ones are the fastest:33: Finally proven


Congrats

Lol Jeff.

Congrats on the good times, wish I wasn't slow..


Sent from iBrick.

Congrats! Finally some competition to get this platform to the 10s and more!

tapafuck

Very clean run, with some great driving. Good job!

That shorty rear wing is probably good for 2mph over the speed version.

Still trying to wrap my head around 127-128 trap on a 3071. Do we know what the car weighed in at?

Says the guy with a 3076 who has never made a pass. What's the matter tuner won't make you a track map?

Congrats! If I'm ever in Crete again I want to see this car!

In my own defense, my gen 1 was hit and before it was, our tracks were closed as the 3076 was in it during winter.

I have to swap over the 3076 to my pu and I'll admit, I need to get cracking on that.

I want to focus on helping a few locals out first and then it's my turn.

And tuner won't make me a track map LOL

My car makes 460whp on a tuff dyno I estimate on a dynojet I'm around 500whp ...so I guess with my car weights at 3000pounds (1360kg) and the good powerband I have it is acceptable to trap 127....


ps I have a gtx3071....

I guess it helps a litle , but with that wing comes to europe ....

Congrats! Impressive for such a minimal setup and track conditions. looking forward to some more runs and improvements!

Congo-rats.....Malaka!

BTW @RE-ACTIONENGSPEED3; your times are mighty impressive especially for what we consider to be on the smaller spectrum of BT upgrades!

Major props to you.

That was an awesome pass.

That elevation doe! 30ft asl!

just tapa it in.

At this rate the platform will be in the 9s in no time. Congratulations on the pass

Great................

Gen1 has the title again.

If u look at the guys that actually use their cars efficiently (I can think of about 2 off the top of my head ) 330ish will yield 114mph with 150lbs or so off .... The basic rule of 1 mph per 10 hp still basically applies and his trap speeds of 127-128 show around 460-470whp on a fully used powerband with I'm betting at least 3k lbs of vehicle weight .

Now is 460-470whp possible on a 3071 with head work and crap ? I assume if teddy is at mid 500s with one size up seems on par .... This guy has just figured out how to put all that power down out of the hole without backpedaling and I assume his logs will show a lesser drop in boost between gears as well .

I'll stick to my original observation and say this isn't a horsepower issue any longer , this is simply a figure out how to put down the power as quickly as you can one and seat seat seat time one instead .

That mph will yield 10s with high 1.5s which is only .100 off what a 330whp ms3 can do with solid skill

γειά σου φίλε! Congratulations and nicely done! What part of Greece are you in? I still have a lot of family in Athens, Crete and Tripoli...

Bravo Thodori,well done!!!!!!

Damn, nice work

Smokin fast - very impressive! Now get rid of that GenDone trans so you can avoid that 4-5 shift!

He's trapping almost 130 lol... how far do you think the Gen 2 4th gear goes?

Nishan had some napkin math showing ~134 I think it was w/ 26" slicks and 7500 rpm. I might be wrong, but I'm about to head to lunch and not going to search for the post!:boobies:

Ahh, i was only thinking 7000 rpm, and wasnt accouting for the tire height.

26" is stock tire height... but i wonder about going up to like a 28" or something to get a little more stretch from each gear. May have a hard time clearing it, and the tuning may be a little funky, but it could work wonders in the lower gears.

why is no one doing this kind of stuff with the speed6 lol :17:

probably overall pushed to the limit. i saw a 123 trap from a gt3071 at 4500ft asl with 26-27psi and 18.5 degrees of timing at 6500.

good job and nice driving. the race for 10s continues to speed up...

a 26" tall thin walled slick will grow a lil over 27" at triple digits keep that in mind ....Bryce (lumberjack) fit 27x9x15 m&h with no issues reported as of yet also .....

keep in mind tire width in drag racing is secondary to sidewall height always

I live in Athens....

check my older post to see dynochart and logs .....
http://www.mazdaspeedforums.org/foru...lly-wg-166661/

Derp, i'm thinking 28" radial which doesnt flex. You'd think i drive a mustang or something :smashfreakB:

Great job, fantastic driving. Keep pushing and get those times down. You seem to have a very efficient setup mixed with a great driver.

Keep up the good work.

Om nom back from lunch.

Discussed here for keeping it in 4th gear with these ~500whp+ cars. This 11.41 just might've snuck into 11.2x without that extra shift and been the new MZR record holder.

Maybe someone can help him take advantage of higher revs so he doesn't have to tranny swap.

Congrats! Very happy to see a first gen claim the top spot! Great job!

This is my only sad part, not the location, I liked a pu sitting on top. Payback for the years of smile jokes lol.

But fantastic run, good job!

Sent from my SCH-I605 using Tapatalk 2

A proficient driver powershifting won't lose beyond 1/10th on the 4-5th shift ...... It would def help to avoid that but this car has plenty left at the start to achieve a high 10 with suspension and launch dialing in .... 2/10ths on the 60ft alone is what I would aim for ... That in turn yields additional traction by the 330ft and so forth .... Yeah would be easier if the car trapped 135 but IMO it's more fun dialing in with limited power than waste hp down the track .

Awesome job man! impressive!!

Well said, I've always preferred putting the power you have to use.


just tapa it in.

Damn that was quick.

And by that you mean how quickly the record has been changing hands this season?

That's the way it should be. Lots of fast cars lurking as we speak

Nice work man! What is your tire setup? I'm guessing slicks to gain that traction. Regardless thats awesome work.

Find me a short block so I can hais fast car of my own.

Soon enough... soon enough...

Man just watched the video and holy shit the track prep looks horrible. Even more impressive knowing what the track looked like.

Wow. Congrats man. Cool to see so many pushing the game!

Somebody sponsor this kid.

The track is very poor...Hava in mind that is an airport that converted for weekend drag days.The best honda civiks we have, made 60ft 1.65(the best) with a lot lot tryies....







Thanks everybody for the good words....

I`m glad that i push the mazdaspeed barier litle further ......

Nice

Sent from my SM-G900T using Tapatalk

Next time I make it out to Athens I would love to see this thing on the track, hopefully you will still have it and be even faster

Sent from my HTC One using Tapatalk

Unacceptable. Murrica needs these records. Someone take it back already.


Jk. Good runs OP!

lol... set record, check phone

Lol Greece holds ms3 record and Ukraine holds ms6 record. Maybe them MPS' got a little extra unicorn dust in em.

Wait one fucken second..









You has auto up/down windows in a speed3?! I want auto down on my passenger window!


Nice run btw :biglaugh:

I has auto up and down in both front windows. DEI window automation module. And it rolls up when you arm the alarm, and you can roll the windows down from the remote.

just tapa it in.

impressive pass on full interior with some buckets in the front

It is nice to know what is possible if I didn't suck at driving...

Alas, I am only (reasonably) competent at building and tuning...

Awesome. Congrats.

some fresh photo....

What's up with the black eye?

Black guys? In Greece? Really?

Intake?

I would guess intake.

I want the black eye.

AWWWWWW shit!!!!! Lets fucking get it

http://stream1.gifsoup.com/view/980226/hammertime-o.gif

Good driving my man. Fuck that shift into 5th kills your E.T.

My only piece of advice is try and hold 1st gear out longer but the boost in 2nd is so righteous you honestly Just need more traction. You on a real slick or the QTP cheater ones?

Wow Darklips approves...im impressed.

If our local Bums would get their act together they could do the same thing. I'm bout to commandeer someones machine and pull a time out of it. I need like a 122 trap and a real slick.

Some people aren't as skillfull as u at hydro locking motors so they need holes in their headlights

I can't crack the Da Vinci code on that slip. Who the fuck cares about a 660ft time. All the hard work is long over at that point.....

What can't u figure out ? That this is and driver311s pass are the only two guys that have ran a 7.5 in the 8th ? ..... When people start worrying more about 60, 330 , and 660 and less about mph is when u gonna see what these cars can actually do ....

Man, @driver311; was a loss for us for sure.


Sent from my iPhone using Tapatalk

YES

I'm a Jack ass I didn't realize I could just cut that in half for the 330 http://www.cvoharley.com/smf/Smileys/CVO/dunce2.gif #ISuck

Yea intake, that is conected to a custom air box.i attach some photos