| |
 |  |  |  |  |  |
 |
| |||||||
| MazdaSpeed 3/6 - Wheels & Tires HaveMazdaSpeed 3 - Wheels & Tires - Have a question about wheels or tires? Need a calculator to figure out offsets? We have them in here |
|
Welcome to Mazdaspeed Forums . You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact contact us. *When you join MSF as a registered user, there will be No Ads. *Registered Members get access to the Off Topic Area of the Forum *Registered Members have an opportunity to upgrade their accounts to VIP, which brings a host of goddies for supporting MSF such as Raffles, Additional Forum Access, More PM Storage, The ability to upload more Images and many other enhancements. *Registered members also get access to the live chat box! |
 |
| |  | LinkBack | Thread Tools | Search this Thread | Display Modes |
 | 
06-24-2011, 05:35 AM
| #1 |  |
  Join Date: Nov 2010 Location: Lancaster, PA
Posts: 2,363
(View Stats)
iTrader: (3)
Rep Power: 1111   Thanks: 3,516
Thanked 1,950 Times in 867 Posts
Groans: 56
Groaned at 13 Times in 11 Posts
(Thread Starter) |   Not Ranked : 0 score  Just bought a new set of rims.... BBS CH 18x8 +38 they are one piece cast, (i was looking for a 2 piece rim, but oh well) i heard that they weigh ~23 lbs per rim, which. my current rota tarmac 3's weigh ~20 lbs. so i am planning on keeping my rotas and putting some sticky tires on them. and possibly just switching over my current tires to my new rims. more pics to come when they arrive and also with the install on them. i am going to roll my rear fenders, i only rub when i have like 3 passengers in the car now, but that will change with these.. i am stoked to put them on. i think they will look great.  crazyp likes this.
__________________
Fully built, Ported everything, GTX3582r, Port Injection, Twin disk clutch, 2-piece Driveshaft.... still slow. The Daily Bitch: 2003 Mazda Protege5 with infinity miles on it  Last edited by SIXual Panda; 03-10-2016 at 03:59 PM. | |
|   |
| The Following 8 Users Say Thank You to SIXual Panda For This Useful Post: | 08.5MS3 (07-22-2011), AZSPEED3 (07-04-2011), Chriscote (07-05-2011), PunjabiPlaya (07-04-2011), rikyrick87 (08-03-2011), SLOWHATCH (09-04-2011), tragik (07-02-2011), trf5000 (07-02-2011) |
|
06-24-2011, 05:40 AM
| #2 | |
  Join Date: Mar 2011 Location: Bastrop, Texas
Posts: 1,996
(View Stats)
iTrader: (0)
Rep Power: 0 Thanks: 17,208
Thanked 1,218 Times in 695 Posts
Groans: 273
Groaned at 21 Times in 20 Posts
| Not Ranked : 0 score looking sexy subbed for pics on car
__________________ 2011 Black Mica - Daily JBR SSP and heavy knob and SSB | Sure RMM | Corksport SRI/TIP/RSB/TMIC | Tanabe FSTB | Cobb AP getting PERM'd | Autotech internals | H&R springs | DDM HID | pussy delete - catless ebay dp and tp  |
|
| |
| The Following User Says Thank You to TexasSpeed3 For This Useful Post: | SIXual Panda (06-24-2011) |
|
06-24-2011, 05:47 AM
| #3 | |
| Must Have Teh 10's!    Join Date: Mar 2008 Location: Columbia, MD
Posts: 10,442
(View Stats)
iTrader: (9)
Rep Power: 10779 Thanks: 6,334
Thanked 21,014 Times in 5,264 Posts
Groans: 101
Groaned at 138 Times in 95 Posts
| Not Ranked : 0 score are those reps or the real thing?
__________________ 2006 Mazdaspeed 6 GT Black Mica #4126 KILLAH Built/SPEED PERF6RMANC3 (SP) 10.6:1 Pistons ~ SP 11mm H11 Head Studs ~ K1 rods ~ SP CNC Head Work ~ Crower 65lb Valve Springs ~ Fully Keyed/Pinned Motor ~ GTX35R w/Tial .82AR Hotside ~ JMF IM w/1000cc PI Injectors ~ SP 75mm TB ~ SP In-Tank FP w/Dual DW300's ~ AEM FPR ~ SP Custom PI Fuel kit ~ CPE 4" MAF ~ CPE SAFEseals ~ TR1035 FMIC ~ CPE Atmosphere DP/Ex Manifold/Oil/Water Lines ~ Tial MV-R EWG VTA'd ~ Denso ITV-24's ~ CPE Dual CBE ~ CPE BT TIP ~ CPE RMM ~ JBR TMM ~ JBR PMM ~ TTFMM ~ CPE RDM ~ Sonic Tuning CO's ~ LED Tails ~ Sonic Tuning HID's ~ Whiteline RSB ~ ACT 6 Puck w/unicorn dust First K04 in the 12's First MS6 in the 11's Certified RichTune E-Tuner |
|
| |
|
06-24-2011, 05:51 AM
| #4 | |
| Join Date: Nov 2010 Location: Lancaster, PA
Posts: 2,363
(View Stats)
iTrader: (3)
Rep Power: 1111 Thanks: 3,516
Thanked 1,950 Times in 867 Posts
Groans: 56
Groaned at 13 Times in 11 Posts
(Thread Starter) | Not Ranked : 0 score
thats why i didnt order from your buddy's site.. i wanted the real deal. --not saying that the reps were bad. cause they were probably the best ones i have seen. but.. they would still be reps..
__________________
Fully built, Ported everything, GTX3582r, Port Injection, Twin disk clutch, 2-piece Driveshaft.... still slow. The Daily Bitch: 2003 Mazda Protege5 with infinity miles on it | ||
|
| |
|
06-24-2011, 05:56 AM
| #5 | |
 Join Date: May 2011 Location: Portage, IN
Posts: 1,162
(View Stats)
iTrader: (4)
Rep Power: 0 Thanks: 1,113
Thanked 828 Times in 424 Posts
Groans: 83
Groaned at 55 Times in 12 Posts
| Not Ranked : 0 score Looks like Evo X MR wheels
__________________ -#1 2007 Mazdaspeed 3 GT Black Mica - BBS RX in Dark Gray, KW V2s, SPC Camber Arms, Cobb AccessPORT w/ JBR mount, Full-Race Prostock Mani, TurboXS FMIC, Grimmspeed EBC, ACT 6 puck & flywheel, TWM STS, PTP Internals, Cobb SRI w/ TIP, Cobb Shift Weight, TurboXS BPV, TurboXS Full TBE, JBR Trilogy, JBR RSB, Cobb FSB...........needs bigger turbo -1970 Chevelle - Needs full resto |
|
| |
|
07-02-2011, 06:21 PM
| #6 | |
 Join Date: Dec 2008 Location: CT :: Stratford :: 203
Posts: 1,455
(View Stats)
iTrader: (0)
Rep Power: 0 Thanks: 632
Thanked 841 Times in 289 Posts
Groans: 11
Groaned at 34 Times in 27 Posts
| Not Ranked : 0 score those are beautiful!! get a lighter wheel.. ull feel the difference.. my rims only weigh like 16lbs...
__________________ :: somewhere between CT & VA :: yea yea - i know i cant spell |
|
| |
| The Following User Says Thank You to :: Gusto :: For This Useful Post: | SIXual Panda (07-03-2011) |
|
07-02-2011, 06:50 PM
| #7 | |
| jbr makes fall-a-parts.  Join Date: Jan 2011 Location: Cambridge Ontario Canada
Posts: 13,163
(View Stats)
iTrader: (11)
Rep Power: 13536 Thanks: 25,744
Thanked 26,388 Times in 7,871 Posts
Groans: 793
Groaned at 496 Times in 321 Posts
| Not Ranked : 0 score Very nice. My buddy just picked up Volk CE28N used for his s2000. Less than 14lbs each. Car is still slow. Lol. These are legit.
__________________   Inb4 85% silicone core. It's better than aluminum. What's you buddy's ex wife trap? I <3 SP63, but that port job though... "The coolant must be evaporating." Bye Felicia "Exclusivity" - CP-enis Demodded. The Seals |
|
| |
| The Following 2 Users Say Thank You to Tokay444 For This Useful Post: | :: Gusto :: (07-03-2011), SIXual Panda (07-03-2011) |
|
07-02-2011, 06:57 PM
| #8 | |
 Join Date: Nov 2010 Location: Haverhill MA
Posts: 2,882
(View Stats)
iTrader: (0)
Rep Power: 0 Thanks: 26,501
Thanked 47,921 Times in 2,239 Posts
Groans: 165
Groaned at 38 Times in 32 Posts
| Not Ranked : 0 score holy shit, bbs ch's were my favorite wheels when i had a gti!  what bolt pattern etc are these?
| |
|
| |
| The Following User Says Thank You to tragik For This Useful Post: | SIXual Panda (07-03-2011) |
|
07-02-2011, 07:40 PM
| #9 | |
| meh, no ideas  Join Date: Dec 2009 Location: St.Louis MO
Posts: 528
(View Stats)
iTrader: (3)
Rep Power: 201 Thanks: 114
Thanked 137 Times in 93 Posts
Groans: 3
Groaned at 20 Times in 4 Posts
| Not Ranked : 0 score subbed for pics
__________________ 89 toyota supra 1JZ Twin Turbo---Sold 2006 MS6 GT few mods ---Sold Monaco White '13 Genesis 2.0T R-Spec-- ISIS downpipe/testpipe, Agency Power CBE, Injen SRI, Forge BOV, JBR Heavy Shift knob should be 240ish wheel right now, tune coming April 27th  |
|
| |
|
07-02-2011, 07:44 PM
| #10 | |
| jbr makes fall-a-parts. Join Date: Jan 2011 Location: Cambridge Ontario Canada
Posts: 13,163
(View Stats)
iTrader: (11)
Rep Power: 13536 Thanks: 25,744
Thanked 26,388 Times in 7,871 Posts
Groans: 793
Groaned at 496 Times in 321 Posts
| Not Ranked : 0 score
__________________ Inb4 85% silicone core. It's better than aluminum. What's you buddy's ex wife trap? I <3 SP63, but that port job though... "The coolant must be evaporating." Bye Felicia "Exclusivity" - CP-enis Demodded. The Seals Last edited by Tokay444; 07-02-2011 at 08:46 PM. | |
|
| |
| The Following 2 Users Say Thank You to Tokay444 For This Useful Post: | SIXual Panda (07-03-2011), SLOWHATCH (09-04-2011) |
|
07-02-2011, 08:19 PM
| #11 | |
 Join Date: Apr 2009 Location: Bel Air, MD
Posts: 403
(View Stats)
iTrader: (1)
Rep Power: 0 Thanks: 4,554
Thanked 294 Times in 91 Posts
Groans: 3
Groaned at 3 Times in 2 Posts
| Not Ranked : 0 score Baulin!
__________________ -Brad |
|
| |
| The Following User Says Thank You to BReif61 For This Useful Post: | SIXual Panda (07-03-2011) |
|
07-02-2011, 09:44 PM
| #12 | |
 Join Date: Mar 2010 Location: Lewistown, PA (State College)
Posts: 2,290
(View Stats)
iTrader: (4)
Rep Power: 1938 Thanks: 3,144
Thanked 3,578 Times in 1,432 Posts
Groans: 16
Groaned at 10 Times in 10 Posts
| Not Ranked : 0 score My roomate had those in 20s on his e92 m3. They are one badass wheel and look awesome. Subbed for installed pics.
__________________ 2010 MS3 - Sold 2015 CX-5 GT AWD - Current  |
|
| |
| The Following User Says Thank You to trf5000 For This Useful Post: | SIXual Panda (07-03-2011) |
|
07-03-2011, 01:36 PM
| #13 | |
| Join Date: Nov 2010 Location: Lancaster, PA
Posts: 2,363
(View Stats)
iTrader: (3)
Rep Power: 1111 Thanks: 3,516
Thanked 1,950 Times in 867 Posts
Groans: 56
Groaned at 13 Times in 11 Posts
(Thread Starter) | Not Ranked : 0 score
im keeping my rotas, which they are 20 lbs for 18x8. not too shabby i guess.
 the reps that anthony was talking about is his buddy's site. Mercedes BMW Audi Subaru Wheels
__________________
Fully built, Ported everything, GTX3582r, Port Injection, Twin disk clutch, 2-piece Driveshaft.... still slow. The Daily Bitch: 2003 Mazda Protege5 with infinity miles on it Last edited by SIXual Panda; 07-03-2011 at 03:09 PM. | ||||
|
| |
| The Following User Says Thank You to SIXual Panda For This Useful Post: | SLOWHATCH (09-04-2011) |
|
07-03-2011, 03:45 PM
| #14 | |
| Join Date: Nov 2010 Location: Haverhill MA
Posts: 2,882
(View Stats)
iTrader: (0)
Rep Power: 0 Thanks: 26,501
Thanked 47,921 Times in 2,239 Posts
Groans: 165
Groaned at 38 Times in 32 Posts
| Not Ranked : 0 score lol nice, the reason why i asked was because in my travels i only ever saw them in 5x100 and 5x112 but vw kids would run adapters on anything. |
|
| |
| The Following User Says Thank You to tragik For This Useful Post: | MicaBlackMS6 (09-29-2011) |
|
07-04-2011, 12:15 AM
| #15 | |
| Join Date: Nov 2010 Location: Lancaster, PA
Posts: 2,363
(View Stats)
iTrader: (3)
Rep Power: 1111 Thanks: 3,516
Thanked 1,950 Times in 867 Posts
Groans: 56
Groaned at 13 Times in 11 Posts
(Thread Starter) | Not Ranked : 0 score
this is the exact wheel that i got... same offset, same width, same everything... except NOT at that price. lol
__________________
Fully built, Ported everything, GTX3582r, Port Injection, Twin disk clutch, 2-piece Driveshaft.... still slow. The Daily Bitch: 2003 Mazda Protege5 with infinity miles on it | ||
|
| |
| The Following User Says Thank You to SIXual Panda For This Useful Post: | tragik (07-05-2011) |
|
07-05-2011, 08:29 PM
| #16 | |
| The Angry Goose  Join Date: Jun 2008 Location: Villa Park, IL
Posts: 3,219
(View Stats)
iTrader: (15)
Rep Power: 701 Thanks: 1,192
Thanked 1,052 Times in 584 Posts
Groans: 14
Groaned at 9 Times in 6 Posts
| Not Ranked : 0 score Sexy wheels!
__________________ Hector 2014 Mazda 3 2008 Mazdaspeed3-SOLD 1979 Mazda Rx7 |
|
| |
| The Following User Says Thank You to Hectik1 For This Useful Post: | SIXual Panda (07-05-2011) |
|
07-05-2011, 08:35 PM
| #17 | |
| Join Date: Mar 2011 Location: Bastrop, Texas
Posts: 1,996
(View Stats)
iTrader: (0)
Rep Power: 0 Thanks: 17,208
Thanked 1,218 Times in 695 Posts
Groans: 273
Groaned at 21 Times in 20 Posts
| Not Ranked : 0 score where r the pics?
__________________ 2011 Black Mica - Daily JBR SSP and heavy knob and SSB | Sure RMM | Corksport SRI/TIP/RSB/TMIC | Tanabe FSTB | Cobb AP getting PERM'd | Autotech internals | H&R springs | DDM HID | pussy delete - catless ebay dp and tp |
|
| |
| The Following 2 Users Say Thank You to TexasSpeed3 For This Useful Post: | SIXual Panda (07-05-2011), tragik (07-05-2011) |
|
07-05-2011, 11:18 PM
| #18 | |
| Join Date: Nov 2010 Location: Lancaster, PA
Posts: 2,363
(View Stats)
iTrader: (3)
Rep Power: 1111 Thanks: 3,516
Thanked 1,950 Times in 867 Posts
Groans: 56
Groaned at 13 Times in 11 Posts
(Thread Starter) | Not Ranked : 0 score
i apologize, but here are my current pics that i have taken so far.. a little bit of a tease i suppose. the rims are fucking amazing. i opened them up with the biggest smile on my face and there was absolutely no regret in buying them. they are FLAWLESS.     
__________________
Fully built, Ported everything, GTX3582r, Port Injection, Twin disk clutch, 2-piece Driveshaft.... still slow. The Daily Bitch: 2003 Mazda Protege5 with infinity miles on it | ||
|
| |
| The Following 6 Users Say Thank You to SIXual Panda For This Useful Post: | 08.5MS3 (07-22-2011), breakfstincluded (07-15-2011), Chriscote (07-05-2011), SLOWHATCH (09-04-2011), Speed13 (08-12-2011), TexasSpeed3 (07-05-2011) |
|
07-05-2011, 11:24 PM
| #19 | |
| Join Date: Mar 2011 Location: Bastrop, Texas
Posts: 1,996
(View Stats)
iTrader: (0)
Rep Power: 0 Thanks: 17,208
Thanked 1,218 Times in 695 Posts
Groans: 273
Groaned at 21 Times in 20 Posts
| Not Ranked : 0 score GROAN nah jk gonna be sexy when they are on
__________________ 2011 Black Mica - Daily JBR SSP and heavy knob and SSB | Sure RMM | Corksport SRI/TIP/RSB/TMIC | Tanabe FSTB | Cobb AP getting PERM'd | Autotech internals | H&R springs | DDM HID | pussy delete - catless ebay dp and tp |
|
| |
| The Following User Says Thank You to TexasSpeed3 For This Useful Post: | SIXual Panda (07-05-2011) |
|
07-05-2011, 11:44 PM
| #20 | |
| Join Date: Nov 2010 Location: Lancaster, PA
Posts: 2,363
(View Stats)
iTrader: (3)
Rep Power: 1111 Thanks: 3,516
Thanked 1,950 Times in 867 Posts
Groans: 56
Groaned at 13 Times in 11 Posts
(Thread Starter) | Not Ranked : 0 score
__________________
Fully built, Ported everything, GTX3582r, Port Injection, Twin disk clutch, 2-piece Driveshaft.... still slow. The Daily Bitch: 2003 Mazda Protege5 with infinity miles on it | ||
|
| |
|
07-06-2011, 04:32 AM
| #21 | |
| jbr makes fall-a-parts. Join Date: Jan 2011 Location: Cambridge Ontario Canada
Posts: 13,163
(View Stats)
iTrader: (11)
Rep Power: 13536 Thanks: 25,744
Thanked 26,388 Times in 7,871 Posts
Groans: 793
Groaned at 496 Times in 321 Posts
| Not Ranked : 0 score At least we know where you're hiding them.
__________________ Inb4 85% silicone core. It's better than aluminum. What's you buddy's ex wife trap? I <3 SP63, but that port job though... "The coolant must be evaporating." Bye Felicia "Exclusivity" - CP-enis Demodded. The Seals |
|
| |
| The Following User Says Thank You to Tokay444 For This Useful Post: | SIXual Panda (07-06-2011) |
|
07-06-2011, 04:49 AM
| #22 | |
 Join Date: Dec 2010 Location: Atlantic City NJ
Posts: 466
(View Stats)
iTrader: (1)
Rep Power: 0 Thanks: 0
Thanked 44 Times in 33 Posts
Groans: 1
Groaned at 14 Times in 12 Posts
| Not Ranked : 0 score What are you doing with the old ones |
|
| |
| The Following User Says Thank You to 609speed6 For This Useful Post: | SIXual Panda (07-06-2011) |
|
07-06-2011, 05:01 AM
| #23 | |
| Join Date: Nov 2010 Location: Lancaster, PA
Posts: 2,363
(View Stats)
iTrader: (3)
Rep Power: 1111 Thanks: 3,516
Thanked 1,950 Times in 867 Posts
Groans: 56
Groaned at 13 Times in 11 Posts
(Thread Starter) | Not Ranked : 0 score
__________________
Fully built, Ported everything, GTX3582r, Port Injection, Twin disk clutch, 2-piece Driveshaft.... still slow. The Daily Bitch: 2003 Mazda Protege5 with infinity miles on it | ||
|
| |
|
07-06-2011, 05:54 AM
| #24 | |
| Join Date: Mar 2011 Location: Bastrop, Texas
Posts: 1,996
(View Stats)
iTrader: (0)
Rep Power: 0 Thanks: 17,208
Thanked 1,218 Times in 695 Posts
Groans: 273
Groaned at 21 Times in 20 Posts
| Not Ranked : 0 score better not do that to these... ill kick u in the dick
__________________ 2011 Black Mica - Daily JBR SSP and heavy knob and SSB | Sure RMM | Corksport SRI/TIP/RSB/TMIC | Tanabe FSTB | Cobb AP getting PERM'd | Autotech internals | H&R springs | DDM HID | pussy delete - catless ebay dp and tp |
|
| |
| The Following User Says Thank You to TexasSpeed3 For This Useful Post: | SIXual Panda (07-06-2011) |
|
07-06-2011, 06:29 AM
| #25 | |
 Join Date: Mar 2010 Location: Manassas, VA
Posts: 3,314
(View Stats)
iTrader: (2)
Rep Power: 2313 Thanks: 4,791
Thanked 4,320 Times in 1,452 Posts
Groans: 35
Groaned at 20 Times in 15 Posts
| Not Ranked : 0 score very nice sir!
__________________ CP-e Atmosphere GTX3076r w1.06 Tial | JMF IM | NATOR D.C. FMIC | JBR Wide Path | Autotech Internals | HKS SSQV2 | Ebay DP | Denso ITV24 | CP-e RDM | AutoExe Strut Tower Bar | Whiteline RSB | Sonic Tuning Coils | DSS Driver Side Axle | JMF OCC BT - 395 awhp 345 awtq @ Moore Automotive 4/12/2014 on 93 octane Stock Turbo - 331 awhp 397 awtq @ Moore Automotive 11/10/2012 on ~e48 12.263 @ 111.75 mph 1.669 60' 11/17/2012  |
|
| |
| The Following User Says Thank You to RichieRichness For This Useful Post: | SIXual Panda (07-06-2011) |
|
07-06-2011, 07:02 AM
| #26 | |
| Join Date: Nov 2010 Location: Haverhill MA
Posts: 2,882
(View Stats)
iTrader: (0)
Rep Power: 0 Thanks: 26,501
Thanked 47,921 Times in 2,239 Posts
Groans: 165
Groaned at 38 Times in 32 Posts
| Not Ranked : 0 score those wheels give me a boner. |
|
| |
| The Following User Says Thank You to tragik For This Useful Post: | SIXual Panda (07-06-2011) |
|
07-06-2011, 07:18 AM
| #27 | |
| Join Date: Nov 2010 Location: Lancaster, PA
Posts: 2,363
(View Stats)
iTrader: (3)
Rep Power: 1111 Thanks: 3,516
Thanked 1,950 Times in 867 Posts
Groans: 56
Groaned at 13 Times in 11 Posts
(Thread Starter) | Not Ranked : 0 score
but i bought these rims used.. and they were already starting to chip. the finish in these rotas is extremely cheap. but i will admit to the curb rash. i was SOOOOOO pissed when that happened.
__________________
Fully built, Ported everything, GTX3582r, Port Injection, Twin disk clutch, 2-piece Driveshaft.... still slow. The Daily Bitch: 2003 Mazda Protege5 with infinity miles on it | ||
|
| |
|
07-06-2011, 11:03 AM
| #28 | |
| Join Date: Dec 2010 Location: Atlantic City NJ
Posts: 466
(View Stats)
iTrader: (1)
Rep Power: 0 Thanks: 0
Thanked 44 Times in 33 Posts
Groans: 1
Groaned at 14 Times in 12 Posts
| Not Ranked : 0 score let me see what they look like |
|
| |
| The Following User Says Thank You to 609speed6 For This Useful Post: | SIXual Panda (07-06-2011) |
|
07-06-2011, 11:07 AM
| #29 | |
 Join Date: May 2011 Location: bo$ton, MA
Posts: 5,685
(View Stats)
iTrader: (11)
Rep Power: 0 Thanks: 7,199
Thanked 8,527 Times in 3,188 Posts
Groans: 219
Groaned at 70 Times in 52 Posts
| Not Ranked : 0 score MM Those are going to look SEXY
__________________  |
|
| |
| The Following User Says Thank You to helmetface For This Useful Post: | SIXual Panda (07-06-2011) |
|
07-06-2011, 02:27 PM
| #30 | |
| Join Date: Mar 2011 Location: Bastrop, Texas
Posts: 1,996
(View Stats)
iTrader: (0)
Rep Power: 0 Thanks: 17,208
Thanked 1,218 Times in 695 Posts
Groans: 273
Groaned at 21 Times in 20 Posts
| Not Ranked : 0 score glad i have permission and meh as long as u didnt bend the rota's but im sure it doesnt look pretty
__________________ 2011 Black Mica - Daily JBR SSP and heavy knob and SSB | Sure RMM | Corksport SRI/TIP/RSB/TMIC | Tanabe FSTB | Cobb AP getting PERM'd | Autotech internals | H&R springs | DDM HID | pussy delete - catless ebay dp and tp |
|
| |
| The Following User Says Thank You to TexasSpeed3 For This Useful Post: | SIXual Panda (07-06-2011) |
|
07-15-2011, 03:37 AM
| #31 | |
 Join Date: May 2011 Location: Portland OR
Posts: 3,588
(View Stats)
iTrader: (9)
Rep Power: 0 Thanks: 6,451
Thanked 4,247 Times in 1,482 Posts
Groans: 261
Groaned at 20 Times in 20 Posts
| Not Ranked : 0 score So I have the opportunity to buy the same set in 18x8.5 for around 900 used and I'd really like to know how they're fitting for you, I have an MS3, but I'm still looking up how difficult fender rolling will be for this wheel at 38 offset
__________________ Genwin Individual Throttle Body Webers 20B Swapped 1UZ w/ Hi-Cap Purple Loush and Trigonometric Valve Tumblers. Thetan Core Fogger System. P1@n0 Tuned to Load Burst Limit. Glacier Red '07.  Last edited by breakfstincluded; 07-15-2011 at 04:45 AM. Reason: pwned |
|
| |
|
07-15-2011, 03:46 AM
| #32 | |
| jbr makes fall-a-parts. Join Date: Jan 2011 Location: Cambridge Ontario Canada
Posts: 13,163
(View Stats)
iTrader: (11)
Rep Power: 13536 Thanks: 25,744
Thanked 26,388 Times in 7,871 Posts
Groans: 793
Groaned at 496 Times in 321 Posts
| Not Ranked : 0 score Well, he has an ms6, so he can't really help you too much with knowing whether or not to roll your ms3 fenders, and you failed to include the two most important aspects. The offset, and tire width.
__________________ Inb4 85% silicone core. It's better than aluminum. What's you buddy's ex wife trap? I <3 SP63, but that port job though... "The coolant must be evaporating." Bye Felicia "Exclusivity" - CP-enis Demodded. The Seals |
|
| |
| The Following 2 Users Say Thank You to Tokay444 For This Useful Post: | breakfstincluded (07-15-2011), SIXual Panda (07-15-2011) |
|
07-15-2011, 04:43 AM
| #33 | |
| Join Date: May 2011 Location: Portland OR
Posts: 3,588
(View Stats)
iTrader: (9)
Rep Power: 0 Thanks: 6,451
Thanked 4,247 Times in 1,482 Posts
Groans: 261
Groaned at 20 Times in 20 Posts
| Not Ranked : 0 score oops forgot to mention that I read in another thread that the size i'm looking at WILL rub, but I just got excited about the BBS CH wanted to hear how for him was despite being MS6, don't wanna jack the thread. http://www.mazdaspeedforums.org/foru...8x8-5-a-58132/ but for curiousity 38 offset
__________________ Genwin Individual Throttle Body Webers 20B Swapped 1UZ w/ Hi-Cap Purple Loush and Trigonometric Valve Tumblers. Thetan Core Fogger System. P1@n0 Tuned to Load Burst Limit. Glacier Red '07. |
|
| |
| The Following User Says Thank You to breakfstincluded For This Useful Post: | SIXual Panda (07-22-2011) |
|
07-22-2011, 10:12 AM
| #34 | |
| Join Date: Nov 2010 Location: Haverhill MA
Posts: 2,882
(View Stats)
iTrader: (0)
Rep Power: 0 Thanks: 26,501
Thanked 47,921 Times in 2,239 Posts
Groans: 165
Groaned at 38 Times in 32 Posts
| Not Ranked : 0 score panda wtf where are the pics!
__________________ Mazda Pi  2010 GENPOO *CS SRI/TIP Combo *Resonator Delete *Mille Miglia HT3s *H&R springs |
|
| |
| The Following User Says Thank You to tragik For This Useful Post: | SIXual Panda (07-22-2011) |
|
07-22-2011, 10:30 AM
| #35 | |
 Join Date: Jun 2010 Location: Santa Fe NM
Posts: 3,791
(View Stats)
iTrader: (1)
Rep Power: 0 Thanks: 5,637
Thanked 5,156 Times in 2,461 Posts
Groans: 371
Groaned at 62 Times in 39 Posts
| Not Ranked : 0 score subbed for winning of the pics installed |
|
| |
| The Following User Says Thank You to I Love Brownies For This Useful Post: | SIXual Panda (07-22-2011) |
|
07-22-2011, 11:18 AM
| #36 | |
 Join Date: Oct 2008
Posts: 3,840
(View Stats)
iTrader: (13)
Rep Power: 0 Thanks: 5,795
Thanked 3,395 Times in 1,633 Posts
Groans: 89
Groaned at 40 Times in 29 Posts
| Not Ranked : 0 score He doesn't have them on yet. |
|
| |
| The Following User Says Thank You to 08.5MS3 For This Useful Post: | SIXual Panda (07-22-2011) |
|
07-22-2011, 11:42 AM
| #37 | |
| Join Date: Nov 2010 Location: Lancaster, PA
Posts: 2,363
(View Stats)
iTrader: (3)
Rep Power: 1111 Thanks: 3,516
Thanked 1,950 Times in 867 Posts
Groans: 56
Groaned at 13 Times in 11 Posts
(Thread Starter) | Not Ranked : 0 score
__________________
Fully built, Ported everything, GTX3582r, Port Injection, Twin disk clutch, 2-piece Driveshaft.... still slow. The Daily Bitch: 2003 Mazda Protege5 with infinity miles on it | ||
|
| |
| The Following 2 Users Say Thank You to SIXual Panda For This Useful Post: | 08.5MS3 (07-22-2011), I_Heart_Haters (07-22-2011) |
|
07-22-2011, 11:58 AM
| #38 | |
 Join Date: Dec 2009 Location: Chicago
Posts: 3,711
(View Stats)
iTrader: (18)
Rep Power: 0 Thanks: 5,256
Thanked 2,986 Times in 1,411 Posts
Groans: 24
Groaned at 109 Times in 61 Posts
| Not Ranked : 0 score +38 on an 8" is the perfect offset for the MS6 IMHO. Nice job. I'm runnin an 8.5" with +42 and it's dead on. You goin with 225s or 235s?
__________________ PERM'D/FORGED - EFR 7163 Street Sleeper   |
|
| |
| The Following User Says Thank You to Alpha For This Useful Post: | SIXual Panda (07-22-2011) |
|
07-22-2011, 12:17 PM
| #39 | |
 Join Date: Dec 2008 Location: VA Beach
Posts: 1,031
(View Stats)
iTrader: (11)
Rep Power: 0 Thanks: 930
Thanked 908 Times in 351 Posts
Groans: 29
Groaned at 7 Times in 6 Posts
| Not Ranked : 0 score <---Jealous
__________________ 06 Speed 6 GT: True twin scroll T4 PTE Billet 6262, dual MVS, SP 10.6:1 pistons, K1 rods, sleeved block... 08 Speed 3|SOLD |
|
| |
| The Following User Says Thank You to theschrum For This Useful Post: | SIXual Panda (07-22-2011) |
|
07-22-2011, 12:31 PM
| #40 | |
| Join Date: Nov 2010 Location: Lancaster, PA
Posts: 2,363
(View Stats)
iTrader: (3)
Rep Power: 1111 Thanks: 3,516
Thanked 1,950 Times in 867 Posts
Groans: 56
Groaned at 13 Times in 11 Posts
(Thread Starter) | Not Ranked : 0 score
Right now, I'm just going to swap my current tires over. So ill be running 225/40 nittos NT555 extreme tires. I'll just be running those until the tires get worn out. then when I get new ones ill probably look into 235s depending on how much space the 225s leave me with.
__________________
Fully built, Ported everything, GTX3582r, Port Injection, Twin disk clutch, 2-piece Driveshaft.... still slow. The Daily Bitch: 2003 Mazda Protege5 with infinity miles on it | ||
|
| |
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| ASA AR9 18x8 rims | rremente | Wheels & Tires - RED | 33 | 02-17-2011 11:20 AM |
| SSR 18x8 | Anklh | Wheels & Tires - COSMIC BLUE | 24 | 02-10-2011 05:51 PM |
8Likes
Linear Mode
