Mazdaspeed Forums
Page 46 of 66 « First 36373839404142434445 46 47484950515253545556 Last »
Show 100 post(s) from this thread on one page

Mazdaspeed Forums (http://www.mazdaspeedforums.org/forum/)
-   MazdaSpeed 3/6 - Wheels & Tires (http://www.mazdaspeedforums.org/forum/f319/)
-   -   OFFICIAL AGGRESSIVE OFFSET THREAD (http://www.mazdaspeedforums.org/forum/f319/official-aggressive-offset-thread-40254/)

tigermack 03-19-2013 02:03 PM
Downsyndromed.

Downmented 03-19-2013 03:45 PM
Quote:
Originally Posted by 2k4_8 (Post 1944553)
@ash4390; Car looks sick man, good job.

I do have a fitment question, I've searched the site on google and the site itself and the setup I've come up with for autox is 17x9 +38 (maybe 40 haven't got that completely nailed down yet) with 245/40/17 DIIs for autox and DD duty. Just want to confirm that a fender roll flat will get this setup under the car without issues. I will be lowered on swifts and have camber arms for the rear. Just want to make sure before I got spend almost 2 grand on wheels and tires lol I think it'll leave me around 5mm between the tire and perch, but it kind of depends on how the tires fit and I may need a small spacer up front, sounds like it should work though?
Quote:
Originally Posted by Tweaek (Post 1956595)
You're still a fucking Douchebag and were/are wrong. He got what he should get for his needs. Isn't that the point you fucking Jackass...

The RPF1 in 17x9 comes in +22, +35, or +45 smart guy. Which one should he have gotten since you know what the fuck your talking about.

The +45 is the one he needs to run a square setup and not have to do fender work, and that would hold true with any rim at 17x9 twat.

I just passed you the moron trophy, you seem to be handling the title well.


Please show me where in his initial post he EVER mentioned RPF1s? Anything past that post is irrelevant, because this comment is the comment that started this conversation in the first place. So please, in your attempt to prove me wrong, please show me the way? Im ready to learn since you are oh so smart.

Im done with your dumb ass.


And no paul, for the second time, that does not make you retarded lol

Tweaek 03-19-2013 09:36 PM
Quote:
Originally Posted by Downmented (Post 1956944)
Please show me where in his initial post he EVER mentioned RPF1s? Anything past that post is irrelevant, because this comment is the comment that started this conversation in the first place. So please, in your attempt to prove me wrong, please show me the way? Im ready to learn since you are oh so smart.
And my reponse to his post was...

Quote:
Originally Posted by Tweaek
Go 17x9 +45 with a 5mm spacer up front. I required a slight toll in the rear. I don't know about the gen 2 particularly on the rolling part.
With that size and offset you can run. 255/40's
I answer his question, you spew diarrhea from your vag and I'm the moron. Fucken hilarious.

You have now wasted 2 pages of this thread and are still wrong and have contributed nothing to this portion of the conversation.

Again, I'll reiterate it for you since your obviously fucking slow and insult humanity as we know it. I even bolded, Italicized, and increased the font so you hopefully can keep up.

Quote:
Originally Posted by Tweaek
The +45 is the one he needs to run a square setup and not have to do fender work, and that would hold true with any rim at 17x9 twat.
The RPF1 came up because that's what he bought, and is negligible to the conversation. It's not your silver lining to somehow have some valid point in the conversation. My hell you seriously don't amaze me...

tigermack 03-19-2013 10:26 PM
Just move on.

Tweaek 03-19-2013 11:01 PM
Quote:
Originally Posted by tigermack (Post 1957711)
Just move on.
Done

Downmented 03-20-2013 06:26 AM
Quote:
Originally Posted by Tweaek (Post 1957763)
Done
You rage much? lol just fyi, i have been fucking with you this entire time since you wanna rage so hard, its been funny too :)

And done

Tweaek 03-20-2013 08:22 AM
OFFICIAL AGGRESSIVE OFFSET THREAD
 
Quote:
Originally Posted by Downmented (Post 1957977)
You rage much? lol just fyi, i have been fucking with you this entire time since you wanna rage so hard, its been funny too :)

And done
All too often unfortunately. I've at least enjoyed your avatar this entire time :)

XLT_66 03-20-2013 08:42 AM
Less chit chat, more pictures....

ckMS3 03-20-2013 08:47 AM
1 Attachment(s)
Playing around with Instagram

Downmented 03-20-2013 11:05 AM
Quote:
Originally Posted by ckMS3 (Post 1958203)
Playing around with Instagram
Whoever owns that Scoobie is a fag, so is the Mazda owner.

ckMS3 03-20-2013 11:47 AM
Quote:
Originally Posted by Downmented (Post 1958502)
Whoever owns that Scoobie is a fag, so is the Mazda owner.
U jelly? I could arrange a threesome.

Boost Addict 03-20-2013 11:53 AM
@ckMS3; did you just have your fenders rolled? I think I know the guy who did them.

ckMS3 03-20-2013 12:47 PM
Quote:
Originally Posted by Boost Addict (Post 1958607)
@ckMS3; did you just have your fenders rolled? I think I know the guy who did them.
Yep, his name was LB I think. He mentioned you, I was like yea I've seen his car on the forums before.

Rears still rub a little so I'm gonna stiffen up the rear suspension.

baardoon 03-25-2013 02:08 PM
19x9 +45 buddy clup P1 racing 2 plus, waiting for suspension (and tires lol) before i throw them on!

http://i221.photobucket.com/albums/d...pscc109ec6.jpg

http://i221.photobucket.com/albums/d...ps424f0938.jpg

http://i221.photobucket.com/albums/d...ps5d0933de.jpg

wheel was turned left slightly

http://i221.photobucket.com/albums/d...ps4e01b616.jpg

http://i221.photobucket.com/albums/d...pscc30db08.jpg

Boost Addict 03-25-2013 03:03 PM
@baardoon; do you plan on putting a spacer on that?

baardoon 03-25-2013 03:21 PM
ya, i was hoping a 5 mm would do it. thoughts?

chuckms6 03-25-2013 03:31 PM
Quote:
Originally Posted by baardoon (Post 1967332)
ya, i was hoping a 5 mm would do it. thoughts?
My wheels are the same width and offset, 5mm should be ok, I'm using 8mm

Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

tigermack 03-25-2013 06:37 PM
You can either leave it or just run a 3mm. Don't need a 5mm. It all depends on how the tire is mounted on it, though.

MS3LUKE 03-26-2013 08:54 AM
Just put some axis on mine this weekend and I'm already rolled/pulled in the rear, I need moar camber. At least -9 does anyone know of a camber kit that can achieve that?

Darth_Nuruodo 03-26-2013 08:56 AM
Quote:
Originally Posted by MS3LUKE (Post 1968508)
Just put some axis on mine this weekend and I'm already rolled/pulled in the rear, I need moar camber. At least -9 does anyone know of a camber kit that can achieve that?
You better be trolling....

Boost Addict 03-26-2013 09:08 AM
http://i136.photobucket.com/albums/q...psf5c60b94.jpg

MS3LUKE 03-26-2013 09:18 AM
Quote:
Originally Posted by Darth_Nuruodo (Post 1968512)
You better be trolling....
Why must I be trolling sir?

MS3LUKE 03-26-2013 09:40 AM
1 Attachment(s)
Attachment 100105

Nliiitend1 03-26-2013 11:26 AM
...because -9° of camber is fucktarded, no matter the reason. :wink1:

chuckms6 03-26-2013 12:00 PM
Quote:
Originally Posted by Nliiitend1 (Post 1968817)
...because -9° of camber is fucktarded, no matter the reason. :wink1:
Competitive evo's run that much camber in the front and its very effective. But I doubt this guy is thinking about road racing or autocross lol.

Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

Nliiitend1 03-26-2013 12:07 PM
Quote:
Originally Posted by chuckms6 (Post 1968897)
Competitive evo's run that much camber in the front and its very effective. But I doubt this guy is thinking about road racing or autocross lol.

Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
I stand by my statement.

If you're running -9° of camber, you're doing it wrong (that is to say, something else with regard to chassis setup isn't set optimally if you need that much camber to get even heat into the tire).

MS3LUKE 03-26-2013 01:27 PM
A simple no would do just fine.
No need for all this shit talking, and no I'm not road racing or autoxing this car. Simply the way it looks
Currently I don't need all -9deg but if the time comes when I do need it I don't want to have to change these arms again

Downmented 03-26-2013 01:43 PM
Quote:
Originally Posted by MS3LUKE (Post 1969051)
A simple no would do just fine.
No need for all this shit talking, and no I'm not road racing or autoxing this car. Simply the way it looks
Currently I don't need all -9deg but if the time comes when I do need it I don't want to have to change these arms again
You are not going to benefit at all from this site and in order to save you im going to suggest going somewhere else for this information you seek. 247 would fit you well.

maisonvi 03-26-2013 01:49 PM
-9 degrees. wow. I know this is an aggressive offset thread, but its still MSF and at no point is that acceptable.

MS3LUKE 03-26-2013 04:15 PM
I don't understand why this is such an unacceptable fitment and question..

NICKELL666 03-26-2013 04:29 PM
Probably because this is a performance based forum.. Not "hellaflush". Hell I even get bashed and I'm not running anything that crazy. Just lower than most on here. Form vs function. Function always wins around here!

Sent from my SCH-I605 using Tapatalk 2

Darth_Nuruodo 03-26-2013 04:30 PM
Then you don't understand this forum. Save yourself now and bow out before it gets bad.

Tapa who tapa wha??

Nliiitend1 03-26-2013 04:30 PM
1 Attachment(s)
You seriously want a "fitment" like this?? :dunno:

http://img.photobucket.com/albums/v2...47717be1_b.jpg

MS3LUKE 03-26-2013 06:27 PM
Yes
Thats the exact fitment I want
It still performs just fine

dastpe 03-26-2013 06:33 PM
Stop feeding the troll. If you aren't a troll post pics of you and ms3 with date and signage.

MS3LUKE 03-26-2013 06:45 PM
Quote:
Originally Posted by dastpe (Post 1969769)
Stop feeding the troll. If you aren't a troll post pics of you and ms3 with date and signage.
About 8 post up is a pic of my rear with the most camber I can pull from the stock arms I'm guessing its about -4...

NICKELL666 03-26-2013 06:50 PM
yeah. thats not a pic of your whole car and no signage.

MS3LUKE 03-26-2013 06:53 PM
Well my car is sitting in stands at my shop getting dipped right now, so won't be able to post pics till its done

Darth_Nuruodo 03-26-2013 07:07 PM
Then you're a troll until you prove otherwise.

Tapa who tapa wha??

MS3LUKE 03-26-2013 07:08 PM
Well I guess until then...
Trolololol


All times are GMT -7. The time now is 08:40 AM.
Page 46 of 66 « First 36373839404142434445 46 47484950515253545556 Last »
Show 100 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
SEO by vBSEO ©2011, Crawlability, Inc.
vB.Sponsors

©Copyright 2008 ; 2019 Cymru Internet Services LLC | FYHN™ Autosports HQ
Ad Management plugin by RedTyger

Page generated in 0.25697 seconds with 11 queries