Not sure if you know this, but ms3's are failwheel drive and I was asking for my rears therefore I will have no issues with traction my friend! :chairshot:

Just because the wheels arent driven doesn't mean you dont want them stuck to the ground. Driving around like your rear is on lunch trays just doesn't make sense. Plus 9 degrees is retarded looking.

Il leave these here :biggrin:

http://farm9.staticflickr.com/8125/8...eafdff05_c.jpg

http://farm9.staticflickr.com/8118/8...a3489397_z.jpg

http://farm9.staticflickr.com/8125/8...922f7954_z.jpg

@7th Initial;

What's the specs on dem wheels an tires?

Varrstoen ES221's 18x8.5 +35offset wrapped in Hankook V12 2155/40/18's

I love the look but I need more tire than that.

I ran a 225/45/18 first and rubbed horribly so i just dropped size and wall. When these tires go Il bump up to 225 or 235/40's

very nice...

I just picked up some old Enkei RS evolution wheels... 3pc.. they need to be refinished, but they were a great deal.

look just like these.. but super dirty..
http://derrickrivera.com/enkeirsevol...729101722a.jpg

hah - I dont even know they width.. the wheels are in that bad of shape.. I'm guessing 17x8, although the ones in the pic above are 17x9, & they look just like what I have.. heh

ill let you know after I refinish them..

Pure Sex

@7th Initial Setup looks tits man. awesome.

Some pics from MNM last weekend

A little high in the rear set up just for the track!
http://img.tapatalk.com/d/13/04/20/nyqupesa.jpg
http://img.tapatalk.com/d/13/04/20/7uge6uja.jpg
http://img.tapatalk.com/d/13/04/20/apehu4y9.jpg
http://img.tapatalk.com/d/13/04/20/evaqe3e5.jpg
@Downmented;
http://img.tapatalk.com/d/13/04/20/nutujady.jpg
http://img.tapatalk.com/d/13/04/20/mega8uqu.jpg
http://img.tapatalk.com/d/13/04/20/8usetuhu.jpg

Sitting pretty!
http://img.tapatalk.com/d/13/04/20/dutysydu.jpg

<3

haven't posted in a while, got a new setup.

rota grid 17x9" +32 225/45/17 Yokohoma Avid Ascend

http://img.photobucket.com/albums/v2...407_191342.jpg

http://img.photobucket.com/albums/v2...d5174d7acd.jpg

better pics once I get the car cleaned up and waxed next weekend.

Did you have to shave the rear bumper and corner of your fender lip? so you wouldn't rub.

wow RoKu -- that looks really good!!!

nice work

I have the rear fender lips rolled, hammered, and pulled a hair. I also smashed the shit out of the bumper tabs with a rubber hammer and bent the edges up around the bolt so it clears the tire. I have ZERO rub with this setup.

You are only going to compliment his car when mines in his pics too??? I see how it is, i thought we were bros

Downmented, can i haz chirrens with your car? The white st120s look dope!










if he won't show the love, I will! :tongue:

Tank Jew <3

better piktars

http://img.photobucket.com/albums/v2...131150d314.jpg

http://img.photobucket.com/albums/v2...bab88f58fe.jpg

http://img.photobucket.com/albums/v2...c79040b993.jpg

Took some photos today while I was bored.

http://farm9.staticflickr.com/8125/8...a12362d7_c.jpg

http://farm9.staticflickr.com/8262/8...d855d561_c.jpg

http://farm9.staticflickr.com/8261/8...0d83d6ba_c.jpg

http://farm9.staticflickr.com/8534/8...3072f5fa_c.jpg

The stash is kinda cute.

hahahaha

sorry Downmented.. Yours looks really ill too!!


reAlly love this pic... those wheels look great!!
http://img.tapatalk.com/d/13/04/20/8usetuhu.jpg

anybody at all know where to find a new/used 2.3 mzr for my 07 ms6?

Uhh wrong forum bro.

New shoes and finally picked up some center caps (car needs a bath). More pics coming soon...

http://img.tapatalk.com/d/13/05/01/zy9umu7y.jpg

http://img.tapatalk.com/d/13/05/01/a8uperah.jpg

http://img.tapatalk.com/d/13/05/01/tu3ere6a.jpg

I'm not a fan of the C3 centercaps personally, but then again I'm not a fan of most centercaps period... :dunno:

Nice MEAT! :fing02:

I'm looking to get a set with the same specs as you for wheel size. How are they holding up? Build quality?

Ive had them on the for about 3 weeks now, holding up just fine. Can't really complain about them.

nice meat rokuSEX!

Nice day out so decided to give mine a good wash.

18x8.75 +35
215/40/18 (seem closer to a 225)

http://i43.tinypic.com/1j7q8k.jpg

tires
 

what brand tires you running

Federal

Sent from my SCH-I605 using Tapatalk 2

NICKEL666, do you have any more side profile shots and close ups of the front and rear. I've been looking at XXR's as well in the same fitment and wanted to see what your clearance looks like.

And was the fender and liner work necessary because of how low you sit or would have been necessary no matter what?

Car looks great man!

Thanks

18x9 +45 w/ 1/4" spacers and 225/45/18 all around. Rolled the rear, that's it

Attachment 107517

Attachment 107518

Sent from my SAMSUNG-SGH-I727

I don't but I can try to get some this weekend. Fender work, I'd say yes. As far as the liners go, you'd be fine if you didn't go so low(any lower and I doubt I'd be able to get out of my driveway). Also, might need some camber adjustments.. Depending on how stiff your suspension is and what size tires.. It's really hard to say until you actually get them on and get your ride height where you want it..

I've got this one..

http://s21.postimg.org/6nth6hlcz/201...8_16_08_10.jpg

So you are saying you did not have to roll the fronts at all? I find that difficult to believe.

well i didnt touch them to put the new wheels on. they feel rounded in the front but i dont know if that is factory or not. on harsher bumps i get a slight swords-clashing noise like the lip hitting fender. my height is just about set so that the fender is lined up with the line between the tread and sidewall. i was actually very happy with this fitment and im reconsidering going to 245/40's down the road, i may just get 235/40's

the rear was a different story, its maybe 3 blocks from firestone to my shop, and it just ate the tires right up without a roll, scraping on every bump. i had to use a prybar and then a metal pipe to roll them quick. im going to do a real roll all around next week and adjust for final ride height.

Sweet, would be much appreciated. I'd definitely like to see how far they poke. I don't ride as low as you but yeah, gonna have to try it out.