Get the spc ball joints. You might also want to consider spacers with that offset to avoid touching the control arms with neg camber.

Me and a buddy of mines

Why isnt jackson on here?

Cause he's a fag. I keep telling him to get on here.

I just picked these Orange Drag wheels... 17x9 +28et...

http://i22.photobucket.com/albums/b3...psgiphsgff.jpg
http://i22.photobucket.com/albums/b3...ps5xwoft3t.jpg

I couldn't pass them up.. such a good deal..

Have tried audi rotor rims 19x8.5 i think, they looks aweome on M6. Shame we didn't droped the car on the surface.

http://img.tapatalk.com/d/14/02/15/udunubas.jpg

what is the width and offset on these? I'm planning on getting the same rims but 18x875 with +20 offset on coils and a roll, should work?

I really like how these have a more aggressive concave.

From what I remember they are the same size and offset you're looking into right now. You would definitely need a pull as well

Sent from my Nexus 5 using Tapatalk

damn. that's just too much poke. Im guessing to have less poke I should go +30 or higher.

If you don't want too much poke I would go lowest offset of 35

Sent from my Nexus 5 using Tapatalk

Im trying to get that concave look. Sigh.

You are far.. It's 18x9.75 +20.. Loll he said:
xxr527 (18x9.75 /+20 offset)
Hankook tires 215/40/18
BC Coilovers BR type and SURE Camber Arms
neochrome nrg lugs
Front/Rear fenders rolled
Will def be going lower once I have a skid plate lol


Envoyé de mon iPhone à l'aide de Tapatalk

215 on a 9.75 inch wheel sounds safe.

Tapatalkin'

Loll to much stretch for me, but it looks really perfect


Envoyé de mon iPhone à l'aide de Tapatalk

SO!!! Update on my setup. Wheels are just waiting to be dropped off to get pc'd Illusion Purple. Never even thought about purple till I saw this color on the pictured is300 down below. Now I stay up in bed all night thinking about it doh. The 255 40s should fit perfect. @DVM17; @smoogs12; @Downmented;

@h.h.sk1nny; Purple goes nice with black. My friend has a PC'd set of evo 9 BBS that are purple and they look tits.

Here is a thread to a photoshoot we did last weekend,

http://www.mazdaspeedforums.org/foru...6/#post2464450

Not that aggressive but:

Attachment 149166
Attachment 149167
Attachment 149168

Specs: enkei nt03m 18x8.5 +38 on 235/40 general g-max as-03

Rolled in the rears with nothing done up front. Currently on H&R springs with Koni struts/shocks.


Sent from my iPhone using Tapatalk

Attachment 149187

sent from my peepee

@Funkster777;

Wheels/tires being mounted today i'll get pics up soon.

Guys,
I have been reading through this thread for the past two hours, and can't find a definitive answer to help me pull the trigger. I want wheels/tires for summer DD and the monthly Auto.X events for my PU. The wheels I like are the MB battles and they only come in 17x9 +30. Can I wrap them in 245 45s without having to do anything other than rolling the rear fenders? I'm on stock height and plan to stay that way for a while. Thanks!

I will just leave these here :)
17x10 rpf1s et38
255 40 17 toyo proxes 4+
rolled and pulled fenders
http://www.supermotors.net/getfile/1...e/dsc_0783.jpg
http://www.supermotors.net/getfile/1...e/dsc_0785.jpg
http://www.supermotors.net/getfile/1...e/dsc_0786.jpg
http://www.supermotors.net/getfile/1...e/dsc_0788.jpg
http://www.supermotors.net/getfile/1...e/dsc_0790.jpg
http://www.supermotors.net/getfile/1...e/dsc_0793.jpg

Im sitting here in the back of the classroom awkwardly thinking about how I'm going to clean the mess I made up... damn you @h.h.sk1nny;

Sent from my DROID RAZR using Tapatalk 2

http://www.supermotors.net/getfile/1...e/dsc_0792.jpg
http://www.supermotors.net/getfile/1...e/dsc_0787.jpg

You sir are more attractive than you know. Especially rolling around on them fancy wheels. I've been thinking about moving to some 18" RPF1's up from my 17's. But I think I'll be keeping them now.

Looking good!! So no rubbing in rears?

No rubbing at all. They are rolled and pulled slightly in the rear. Tires will camber in as the coilover is compressed. Fronts needed the metal bumper tab cut off and then I installed the quick release mounts on the sides. Still need to do a little trimming up on the side of the bumper, very minor rub over bumps.

I think some people under estimate the effectiveness of a good, clean roll/ pull on the fenders. Properly rolled/ pulled fenders can accommodate damn near any wheel/ tire size with minimal to no rubbing.

Exactly. Do I nice quality job, do everything how it should. You can still have a nice DD and pretty much drive normal with no issues.

Evo BBS wheels 18x8.5 38 offset w/245/40/18's

Front there is NO issues, the rears rub on dips in the road and that's about it. Will be going with a 225/40/18 tire

It must've been fun driving with those tires!! Looks like you might need to adjust your mudflaps :P

So after this happened

http://img.tapatalk.com/d/14/03/08/by9yqeva.jpg

And this

http://img.tapatalk.com/d/14/03/08/3e8yre2a.jpg

I was forced to put my 17 inch Enkies on

http://img.tapatalk.com/d/14/03/08/jerupuhy.jpg

http://img.tapatalk.com/d/14/03/08/zabavume.jpg

http://img.tapatalk.com/d/14/03/08/avezasaz.jpg

http://img.tapatalk.com/d/14/03/08/vygyvu2e.jpg

http://img.tapatalk.com/d/14/03/08/7ara8y7e.jpg

At least they don't look to bad and for a 17x7 tire it handles really well !! Last picture I laughed at figured what are car would have looked like as a hatch :P


Sent from my iPhone using Tapatalk

Varrstoen Es7. 19x9.5 +30

Finally got all my stuff on . wheels are xxr 527 18x8.75 +35 Nitto 555 235/40/18. Swift springs Attachment 151774Attachment 151775Attachment 151776Attachment 151777Attachment 151778Attachment 151779

snappin necks and cashin checks

Oh also rolled in the reara

snappin necks and cashin checks

Attachment 151783

snappin necks and cashin checks

Attachment 151788

snappin necks and cashin checks

^^^ heard nothing but bad reviews on the quality of those wheels.. specifically the xxr 527 .. be careful .. the spokes have a cracking issue...