OFFICIAL AGGRESSIVE OFFSET THREAD

[EdgeAutosport.com]

I made 447whp and 437wtq on my old atp set-up @24psi. Havent dynod on my current t3 setup im lacking some fuel for the time being

[madspd6]

Originally Posted by Mr06Ms6 oh man me too.. at first i was thinking 18x9.5 +45 rpf1 but i was told that it would hit the strut then i saw the nt03's and fell in love with them... i think i might get a set if i can find a used set. im only on springs now and i dont think id run coils anytime soon.. so i have a little bit of room to play around with it. it kinda sux that speed6's r so rare because the examples r very limited so u have to test things out yourself lol

Originally Posted by madspd6 am i doing it wrong?

18x9 +35 rpf1s as requested in your previous post. Fender roll and slight pull to make this work.

If you want specs of what's left for me between the strut and wheel I can get that then you could just get spacers.

http://www.willtheyfit.com/index.php...&Submit=Submit

[Roszko]

Originally Posted by eric@edgeautosport I made 447whp and 437wtq on my old atp set-up @24psi. Havent dynod on my current t3 setup im lacking some fuel for the time being

Any videos?

[EdgeAutosport.com]

Originally Posted by Roszko Any videos?

btms3 447whp 439wtq wcf - YouTube

btms3 447whp 439wtq wcf - YouTube

Mazdaspeed3 kills evo - YouTube

Mazdaspeed3 kills evo - YouTube

[m4tic]

TSW Interlagos 19x8 +35 235/35

[Domino81]

I love those wheels and the stance for the most part, with the exception of sticking out past the fenders and that they're 19".

[I<3Groceries]

Originally Posted by m4tic TSW Interlagos 19x8 +35 235/35

I didn't think those wheels would look good on the Speed 6. But they look great!

Me likey!

Sent from my Galaxy Nexus using Tapatalk 2

[omgvance]

My car should be done by the end of this month.

full GV lip kit
19x10 +22 SSR SP1's

I'm waiting on the smaller tire to come in, lip kit painted.

(car will be lower, this is just from the test fit at the shop)

[madspd6]

whoa... nice.

[mazdafreak]

Sneak peak! Camera phone sucks on the color....they are candy purple evo x wheels...NEW PICS SOON!! ((STILL A WORK IN PROGRESS))

Thanks to @dastpe, I shaved down the tap where fender meets bumper, no more rubbing! I'm still gonna do a small pull soon and moar lowz!

205/40 on rear....225/40 on fronts.

[Boost Addict]

18x8.5 et40 front
18x8.5 et35 rear

[dastpe]

Originally Posted by mazdafreak Sneak peak! Camera phone sucks on the color....they are candy purple evo x wheels...NEW PICS SOON!! ((STILL A WORK IN PROGRESS)) Thanks to @dastpe, I shaved down the tap where fender meets bumper, no more rubbing! I'm still gonna do a small pull soon and moar lowz! 205/40 on rear....225/40 on fronts.

i def would go for 225 all around when you wear that set of tires out.

Originally Posted by Boost Addict 18x8.5 et40 front 18x8.5 et35 rear

what size spacers did you add?

[Boost Addict]

Originally Posted by dastpe what size spacers did you add?

Wheels are et40 stock, just put 5mm's on the rear.

[dastpe]

Originally Posted by Boost Addict Wheels are et40 stock, just put 5mm's on the rear.

looks better! saw your car posted online from a show in MD and the wheels looked a little sunken. you could even do an 8 on the rear and 5 in the front.

[Boost Addict]

What I really want to do is get 15mm rears and 12mm fronts. I want to try and avoid pressing in extended studs, so I'd rather just get spacers with extended studs in them. And I believe 12mm is the minimum that comes with studs pressed into the spacer itself.

[mazdafreak]

Originally Posted by dastpe i def would go for 225 all around when you wear that set of tires out.

And why is that??

[I<3Groceries]

What's the deal with bicycle tires?!

I fit 245s on my MS6, and I'm definitely going to try to stuff 255s next time I'm in the market for tires.

Sent from my Galaxy Nexus using Tapatalk 2

[dastpe]

Originally Posted by mazdafreak And why is that??

just to even the look out. and throw a 5mm spacer on the rear and a 3mm on the front. i promise you will love how it looks. i did it and love it.

[crtguns]

so.. finally got this how I like it... mostly.

Had CO/s, had to take off to fit Evo wheels. There was literally 1/16" clearance between coil and wheel. Have eibach sport coils now.

There are no spacers in these. Front and rear are 240/45/17. And rear is really close. Fucking pucker factor hearing the tire hit the car at freeway speeds! When I got home there was black spagetti hanging off the rear tires. Fronts are fine.

Question is about bumpstops... is there a universal type that you are using that offers the 2" I need to keep fender and tire apart?

[dastpe]

Originally Posted by Boost Addict What I really want to do is get 15mm rears and 12mm fronts. I want to try and avoid pressing in extended studs, so I'd rather just get spacers with extended studs in them. And I believe 12mm is the minimum that comes with studs pressed into the spacer itself.

yeah, but with 15mm and extended studs you will have to cut your stock studs. i think you need a 20mm to clear the studs...not 100% sure on that number though.

Originally Posted by crtguns so.. finally got this how I like it... mostly. Had CO/s, had to take off to fit Evo wheels. There was literally 1/16" clearance between coil and wheel. Have eibach sport coils now. There are no spacers in these. Front and rear are 240/45/17. And rear is really close. Fucking pucker factor hearing the tire hit the car at freeway speeds! When I got home there was black spagetti hanging off the rear tires. Fronts are fine. Question is about bumpstops... is there a universal type that you are using that offers the 4" I need to keep fender and tire apart?

not sure about bumpstops...check out fatcats.
are you rolled? pulled? inner fender/bumper ground down (that part is what creates the spaghetti rubber piece)? specs on wheels?

[:: Gusto ::]

Originally Posted by omgvance My car should be done by the end of this month. full GV lip kit 19x10 +22 SSR SP1's I'm waiting on the smaller tire to come in, lip kit painted. (car will be lower, this is just from the test fit at the shop)

nice set up doood!!!

[Plavin1991]

Originally Posted by eric@edgeautosport unicorn is gone lol It was a joke but meh

I jus wanna say u sir made my night jus ^^^that much better cheers to u my friend

[nswartz19]

my speed at drift atlanta.

[omgvance]

Originally Posted by nswartz19 my speed at drift atlanta.

Nice, I saw your car there I was parked a couple rows in front of you!

[EdgeAutosport.com]

[Domino81]

Still not sure about that lip...

[EdgeAutosport.com]

Originally Posted by Domino81 Still not sure about that lip...

We all have rice in us CF ftw

[Domino81]

No, the only critique I have about it is the angle at which the fin points. Had it been a bit more angled back I'd be all over it.

[EdgeAutosport.com]

Originally Posted by Domino81 No, the only critique I have about it is the angle at which the fin points. Had it been a bit more angled back I'd be all over it.

They do make ones like that

[Domino81]

Link me, brother mother fucker. Link me.

[fish20bcm]

Nextmod Lip - more angled look

[Kydizzle]

why you got same wheels as me dude and car color

[fish20bcm]

Originally Posted by Kydizzle why you got same wheels as me dude and car color

Haha, guess good minds think alike! What size tires are you running? Did you need a roll/pull running on the BCs?

Im at 235/40/18 right now and stock height, looking to drop it shortly (my stock suspension is getting pretty shitty) but it looks like I'll definitely need a roll at that point....

Any advice is appreciated, thx.

[EdgeAutosport.com]

Originally Posted by Kydizzle why you got same wheels as me dude and car color

Cause silver is the best duh

[Kydizzle]

i got 225/40 on mine and have no wheel gap but i had to roll and pull the fenders a little, just did it with my hands and a heat gun haha looks flawless too

[Justin..]

Hey everyone, long time stalker, first time poster

Here's my '10 GenII Lux Pack

Running 18x9.5 +38 Rota T2R's in Hyperblack, wrapped in 235 Maxxis MAZ1's









I did buy coil overs earlier this year, but they hit on the wheel...



If anyone knows what coil overs I can use that are about as thin as the stock struts, that would be awesome

[dastpe]

3mm spacer?

[ZoomByU]

lmao...3mm spacer bud.i had the same specs

[:: Gusto ::]

s
p
a
c
e
r
!!
=========
they have spoken!!!

[08sedanman]

Originally Posted by SketchyMark 18x9.5+38 on 215/40

What brand tire does anyone know. This setup is sick !