OFFICIAL AGGRESSIVE OFFSET THREAD

[tigermack]

Downsyndromed.

[Downmented]

Originally Posted by 2k4_8 @ash4390; Car looks sick man, good job. I do have a fitment question, I've searched the site on google and the site itself and the setup I've come up with for autox is 17x9 +38 (maybe 40 haven't got that completely nailed down yet) with 245/40/17 DIIs for autox and DD duty. Just want to confirm that a fender roll flat will get this setup under the car without issues. I will be lowered on swifts and have camber arms for the rear. Just want to make sure before I got spend almost 2 grand on wheels and tires lol I think it'll leave me around 5mm between the tire and perch, but it kind of depends on how the tires fit and I may need a small spacer up front, sounds like it should work though?

Originally Posted by Tweaek You're still a fucking Douchebag and were/are wrong. He got what he should get for his needs. Isn't that the point you fucking Jackass... The RPF1 in 17x9 comes in +22, +35, or +45 smart guy. Which one should he have gotten since you know what the fuck your talking about. The +45 is the one he needs to run a square setup and not have to do fender work, and that would hold true with any rim at 17x9 twat. I just passed you the moron trophy, you seem to be handling the title well.

Please show me where in his initial post he EVER mentioned RPF1s? Anything past that post is irrelevant, because this comment is the comment that started this conversation in the first place. So please, in your attempt to prove me wrong, please show me the way? Im ready to learn since you are oh so smart.

Im done with your dumb ass.


And no paul, for the second time, that does not make you retarded lol

[Tweaek]

Originally Posted by Downmented Please show me where in his initial post he EVER mentioned RPF1s? Anything past that post is irrelevant, because this comment is the comment that started this conversation in the first place. So please, in your attempt to prove me wrong, please show me the way? Im ready to learn since you are oh so smart.

And my reponse to his post was...

Originally Posted by Tweaek Go 17x9 +45 with a 5mm spacer up front. I required a slight toll in the rear. I don't know about the gen 2 particularly on the rolling part. With that size and offset you can run. 255/40's

I answer his question, you spew diarrhea from your vag and I'm the moron. Fucken hilarious.

You have now wasted 2 pages of this thread and are still wrong and have contributed nothing to this portion of the conversation.

Again, I'll reiterate it for you since your obviously fucking slow and insult humanity as we know it. I even bolded, Italicized, and increased the font so you hopefully can keep up.

Originally Posted by Tweaek The +45 is the one he needs to run a square setup and not have to do fender work, and that would hold true with any rim at 17x9 twat.

The RPF1 came up because that's what he bought, and is negligible to the conversation. It's not your silver lining to somehow have some valid point in the conversation. My hell you seriously don't amaze me...

[tigermack]

Just move on.

[Tweaek]

Originally Posted by tigermack Just move on.

Done

[Downmented]

Originally Posted by Tweaek Done

You rage much? lol just fyi, i have been fucking with you this entire time since you wanna rage so hard, its been funny too

And done

[Tweaek]

Originally Posted by Downmented You rage much? lol just fyi, i have been fucking with you this entire time since you wanna rage so hard, its been funny too And done

All too often unfortunately. I've at least enjoyed your avatar this entire time

[XLT_66]

Less chit chat, more pictures....

[ckMS3]

Playing around with Instagram

[Downmented]

Originally Posted by ckMS3 Playing around with Instagram

Whoever owns that Scoobie is a fag, so is the Mazda owner.

[ckMS3]

Originally Posted by Downmented Whoever owns that Scoobie is a fag, so is the Mazda owner.

U jelly? I could arrange a threesome.

[Boost Addict]

@ckMS3; did you just have your fenders rolled? I think I know the guy who did them.

[ckMS3]

Originally Posted by Boost Addict @ckMS3; did you just have your fenders rolled? I think I know the guy who did them.

Yep, his name was LB I think. He mentioned you, I was like yea I've seen his car on the forums before.

Rears still rub a little so I'm gonna stiffen up the rear suspension.

[baardoon]

19x9 +45 buddy clup P1 racing 2 plus, waiting for suspension (and tires lol) before i throw them on!







wheel was turned left slightly

[Boost Addict]

@baardoon; do you plan on putting a spacer on that?

[baardoon]

ya, i was hoping a 5 mm would do it. thoughts?

[chuckms6]

Originally Posted by baardoon ya, i was hoping a 5 mm would do it. thoughts?

My wheels are the same width and offset, 5mm should be ok, I'm using 8mm

Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

[tigermack]

You can either leave it or just run a 3mm. Don't need a 5mm. It all depends on how the tire is mounted on it, though.

[MS3LUKE]

Just put some axis on mine this weekend and I'm already rolled/pulled in the rear, I need moar camber. At least -9 does anyone know of a camber kit that can achieve that?

[Darth_Nuruodo]

Originally Posted by MS3LUKE Just put some axis on mine this weekend and I'm already rolled/pulled in the rear, I need moar camber. At least -9 does anyone know of a camber kit that can achieve that?

You better be trolling....

[Boost Addict]

[MS3LUKE]

Originally Posted by Darth_Nuruodo You better be trolling....

Why must I be trolling sir?

[MS3LUKE]

image.jpg

[Nliiitend1]

...because -9° of camber is fucktarded, no matter the reason.

[chuckms6]

Originally Posted by Nliiitend1 ...because -9° of camber is fucktarded, no matter the reason.

Competitive evo's run that much camber in the front and its very effective. But I doubt this guy is thinking about road racing or autocross lol.

Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

[Nliiitend1]

Originally Posted by chuckms6 Competitive evo's run that much camber in the front and its very effective. But I doubt this guy is thinking about road racing or autocross lol. Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

I stand by my statement.

If you're running -9° of camber, you're doing it wrong (that is to say, something else with regard to chassis setup isn't set optimally if you need that much camber to get even heat into the tire).

[MS3LUKE]

A simple no would do just fine.
No need for all this shit talking, and no I'm not road racing or autoxing this car. Simply the way it looks
Currently I don't need all -9deg but if the time comes when I do need it I don't want to have to change these arms again

[Downmented]

Originally Posted by MS3LUKE A simple no would do just fine. No need for all this shit talking, and no I'm not road racing or autoxing this car. Simply the way it looks Currently I don't need all -9deg but if the time comes when I do need it I don't want to have to change these arms again

You are not going to benefit at all from this site and in order to save you im going to suggest going somewhere else for this information you seek. 247 would fit you well.

[maisonvi]

-9 degrees. wow. I know this is an aggressive offset thread, but its still MSF and at no point is that acceptable.

[MS3LUKE]

I don't understand why this is such an unacceptable fitment and question..

[NICKELL666]

Probably because this is a performance based forum.. Not "hellaflush". Hell I even get bashed and I'm not running anything that crazy. Just lower than most on here. Form vs function. Function always wins around here!

Sent from my SCH-I605 using Tapatalk 2

[Darth_Nuruodo]

Then you don't understand this forum. Save yourself now and bow out before it gets bad.

Tapa who tapa wha??

[Nliiitend1]

You seriously want a "fitment" like this??

[MS3LUKE]

Yes
Thats the exact fitment I want
It still performs just fine

[dastpe]

Stop feeding the troll. If you aren't a troll post pics of you and ms3 with date and signage.

[MS3LUKE]

Originally Posted by dastpe Stop feeding the troll. If you aren't a troll post pics of you and ms3 with date and signage.

About 8 post up is a pic of my rear with the most camber I can pull from the stock arms I'm guessing its about -4...

[NICKELL666]

yeah. thats not a pic of your whole car and no signage.

[MS3LUKE]

Well my car is sitting in stands at my shop getting dipped right now, so won't be able to post pics till its done

[Darth_Nuruodo]

Then you're a troll until you prove otherwise.

Tapa who tapa wha??

[MS3LUKE]

Well I guess until then...
Trolololol