@Dash08 im assuming you have a AP and did some data logging... where did you go? Long Beach is obviously close to me.. I haven't been able to find a decent safe place to do some DL so I can get tuned.

There really isn't a safe place around here. It's always a gamble. The best you can do is find an industrial area with a desolate street at night and browse the street for cops before you run.

To be honest, I do my 4th gear wot logs on the 405 fwy. at about 2 in the morning.

That's just me, I give no fucks.

so im assuming you all are coming right... right ... right... right?

:buttkick:

wanna race @TheDeebs? hehe

IF you guys havent done SS lines before. The fronts I hear alot of peeps strip and need a wrong wrench to fix. I think front is a 13mm, pipe wrench, I picked up a cheap one, Issue was ther are all to thick to fit, Have to grind down the sides to make it a thinner size wrench.

i don't have fmic.

that and I'm about 140lbs more heavier than you.. lol

nah.. i'm just gloating already... hehe

I'll take any spanking anytime :18:

I meant flare wrench. Just the top and bottom of wrench grind down to make it thinner. If Dash comes over to do ss lines. I have heard of people stripping or messing up the part of the rubber brake line to caliper part.
WRENCHES > Non-Ratcheting > Flare Nut > | GearWrench™

I has them wrenches ;) babe.

I'm pretty sure I have a flare wrench already ground down. Used it on another car awhile back.

@TheDeebs I haven't done SS lines on the MS3. I've done them in the past on other vehicles, but not this one. So, I don't know exactly how much help I can offer.

I'm coming to the BBQ, but I'm not working on cars.

The fronts are easy on gen one. I did round the passenger a little but the lines get replaced anyway. The backs were weird. Passenger line did not budge. I had to remove the caliper to remove the line. Drivers came off super easy with 13 mm open wrench. I replaced all the bleeders with speed bleeders. One man brake bleed now. $33 shipped from ebay. Mazfest is a little ways off. Still trying to swing it

for those coming from out of state; anyone up to splitting costs for a hotel for friday and sat?

Bump!

Sevenstock Joins Forces with MazFest for an explosive ALL MAZDA event and Track Day


SevenStock, the greast Rotary Engine Show in the world, is back for its 15th Anniversary! We are proud to announce that SS has once again partnered with Mazda, and this year with Mazfest, to bring SevenStock to the track! Yes, to the track!

For the first time ever SevenStock will allow all RE enthusiast the pleasure of a dynamic event, where participants will not only be able see & hear awesome Mazda factory racers on-track, but run their own RX on the circuit also.

The following is for you all to hold the date and know where this is going down:

DATE: Saturday September 29, 2012

LOCATION: Willow Springs International Raceway, Rosmond, CA.

*FULL HOTEL, TRACK REGISTRATION, ETC... will be forthcoming in the next few days and weeks.

We have quite a bit of cool things planned for the event, including the worlds large RX Caravan to the track!!

We are so excited this came together and look forward to all your support as in years past!!

Sevennotstock is way better. LOL.

there are plenty of spots left.. only 25 or so registered so far..

I will be there for sure..

I'll be there!

all registered. can't wait

all the from Arizona huh :wavey:

keep em coming!

me and expect atleast 10 more i know of

nice!

i want to go now

damn. Just found out the military is sending me to San Antonio for some training. Sucks that I won't be able to make this event.

Bump

tapafuck

Bump

Who is for sure going from So Cal nator and wants to meet up somewhere so we can roll up there together.

I'm hoping to leave riverside area by 6am



Sent from my EVO using Tapatalk 2

Well there is a socal meet caravan thing but 6am would be early for that unless the rest agree to go at that time...

You tracking?

tapafuck

no i wont be tracking. i just threw out a general time considering how far it is from riverside. i think somewhere around 2.5 hours.

Well I'm going to meet some people at 15 and 138 around 8 or so from there its about 75 miles

tapafuck

Thanks Guys for coming to this event.... it was epic!

We appreciate it!

Sorry for not hanging around with you guys, coz i've been running around working in the event.

Now where's the pictures!!!?

Some pictures in julies thread I believe in socal section

tapafuck

http://i860.photobucket.com/albums/a...psbcece68c.jpg
http://i860.photobucket.com/albums/a...ps3d5ccd6a.jpg
http://i860.photobucket.com/albums/a...ps60fd1fe8.jpg
http://i860.photobucket.com/albums/a...ps3fdc8d76.jpg
http://i860.photobucket.com/albums/a...ps90d1a36e.jpg
http://i860.photobucket.com/albums/a...psa8947fd7.jpg
http://i860.photobucket.com/albums/a...ps2d9858e6.jpg
http://i860.photobucket.com/albums/a...ps894b1d93.jpg
http://i860.photobucket.com/albums/a...psb9ba5bff.jpg

Here are some videos of the stock clutch slowly dying. :(

Onto the —Drift HD videos. — :2thumbs:

Mazfest 2012 Mazdaspeed 3 Beginners Lap

Mazfest 2012 Mazdaspeed 3 Blue Group Run 2

Mazdaspeed 3 Willow spring Blue run 3


Here are the Samsung Galaxy S 3 Videos:

Willow Spring Racing Line run.

Willow Springs Mazfest 2012 Mazdaspeed 3 Blue group session 2.mp4

Willow Springs Mazfest 2012 Mazdaspeed 3 Blue group session 2.5.mp4

Willow Springs Mazfest 2012 Mazdaspeed 3 Blue group session 3.mp4

Willow Springs Mazfest 2012 Mazdaspeed 3 Parade Lap.mp4

sweet. you got me on vid