register gallery
 

Go Back   Mazdaspeed Forums > Mazdaspeed Forums Sponsors > JAMES BARONE RACING

JAMES BARONE RACING JBR is a leading manufacturer of high-quality aftermarket parts for the Mazda community. We take pride in our reputation for providing the highest-quality performance products at the best values, and we back up that reputation with outstanding customer service and free shipping. We are committed to the Mazda platform and we actively partner with other members of the community in our selection, design, and testing of new products to make sure they meet their needs. We control every step in the engineering and fabrication process to ensure the highest standards of workmanship. The result is a line of products whose performance and reliability have been proven both on the street and on the track. Visit us at jamesbaroneracing.com


Welcome to Mazdaspeed Forums .

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact contact us.

*When you join MSF as a registered user, there will be No Ads.

*Registered Members get access to the Off Topic Area of the Forum

*Registered Members have an opportunity to upgrade their accounts to VIP, which brings a host of goddies for supporting MSF such as Raffles, Additional Forum Access, More PM Storage, The ability to upload more Images and many other enhancements.

*Registered members also get access to the live chat box!
Like Tree14Likes
  • 5 Post By JBR
  • 1 Post By fz6brian
  • 1 Post By JBR
  • 1 Post By fz6brian
  • 1 Post By Ksky90
  • 1 Post By Ksky90
  • 1 Post By Ksky90
  • 1 Post By JBR
  • 1 Post By HawkeyeGeoff
  • 1 Post By Franky-5-Fingaz
Reply
 
Bookmark and Share LinkBack Thread Tools Search this Thread Display Modes
 Old 05-14-2015, 12:22 PM   #1
JBR
Approved MSF Vendor
 
JBR's Avatar
 
Join Date: Sep 2009
Posts: 6,584   (View Stats)
iTrader: (27)
Rep Power: 7092
JBR is the leader of the worldJBR is the leader of the worldJBR is the leader of the worldJBR is the leader of the worldJBR is the leader of the worldJBR is the leader of the worldJBR is the leader of the worldJBR is the leader of the worldJBR is the leader of the worldJBR is the leader of the worldJBR is the leader of the world
Thanks: 7,202
Thanked 13,808 Times in 2,738 Posts
Groans: 28
Groaned at 79 Times in 53 Posts
(Thread Starter)
Not Ranked  0 score     
Arrow JBR has your MAC 35 Series 3-Port EBCS kits in stock!!

Details:
By request of the Mazdaspeed Community, JBR has put together an affordable *3-Port Electronic Boost Controller that utilizes the trusted MAC 35 series valve. No longer do you need to waste your time sourcing the valve, the fittings, the vacuum hose and the hardware separately to make up your own kit. We've done all the work for you and it's all right here in one complete kit at a very reasonable price.



The MAC 35 series is a direct solenoid operated 3-way poppet valve. It features a short stroke solenoid, a balanced poppet and powerful return spring. These features translate into high shifting forces, fast consistent response times, and long life. This valve provides extremely fast response and very high high flow all in a surprisingly small package.

We've made the installation as simple as possible too. It can easily be mounted in the OEM location and plugs directly in to the OEM wiring harness. With the 18" leads, it can be mounted most anywhere with the included mounting bracket, 36" of vacuum hose and mounting hardware.

Features:
- Designed and Manufactured in the USA
- Nickel plated vacuum fittings
- Complete kit ready to install
- OEM mounting location

Application:
2006 - 2013 Mazdaspeed 3/6 and CX-7

Includes:
-1 EBCS
-3 1/8" NPT 90 degree vacuum fittings
-1 1/8" NPT Plug
-5 Zip ties
-36" of vacuum hose
-2 Vacuum caps
-1 Vacuum T Connector
-Mounting bracket
-Mounting hardware
-Carries MAC manufacturers warranty
-Shipping is free in the US

*Proper tuning is required for 3-port mode
Zdraveca, Jtaylor, tegxsi and 2 others like this.

Last edited by JBR; 06-06-2015 at 04:18 AM.
JBR is offline   Reply With Quote
The Following 17 Users Say Thank You to JBR For This Useful Post:
Agent_Orange (05-22-2015), Amnesiac (05-22-2015), Hush (05-22-2015), impossible (05-27-2016), jack_hammer (05-22-2015), JgamB (05-22-2015), Justin@Freektune (05-22-2015), Mauro_Penguin (05-14-2015), MD1032 (05-29-2015), my2k13speed3 (05-14-2015), portetra000 (05-22-2015), Raider (09-29-2015), s1xstringmayhem (06-03-2015), tegxsi (05-22-2015), XxSmarTz (06-11-2015), Zdraveca (05-19-2015), [R]usty (05-22-2015)
 Old 05-22-2015, 04:30 AM   #2
 
knocturnal's Avatar
 
Join Date: May 2012
Location: Virginia Beach, VA
Posts: 265   (View Stats)
iTrader: (1)
Rep Power: 122
knocturnal has disabled reputation
Thanks: 101
Thanked 91 Times in 64 Posts
Groans: 1
Groaned at 2 Times in 2 Posts
Not Ranked  0 score     
Default

Must hazzzzz! Thank you for the affordable pricing. Some of us builders do have to put family first at times. This really helps
__________________
2012 Crystal White Pearl MazdaSpeed 3

Mods:
BNR S4 V2 // XS Power Manifold V3 // JBR Tru-3.0" Aluminum Intake // Devils Own WMI D10 NOZZLE// JBR DISI Bypass Valve Hose // JBR 70duro RMM // JBR SSB // JBR SSP // JBR Coolant Bypass Kit // DM EGR Full Delete Kit // DM TMM // DM PMM // COBB AP V2 // CNT Racing Catless Downpipe // CP-E TMIC // CP-E Injector Seals // SP63 Valve Cover Breather // Custom 3" Magnaflow exhaust //One Step Colder NGK Plugs // Bosch 3bar Map sensor // Grimmspeed EBCS // MD OCC // MD PCV Plate // Stop Tech Braided Lines // Autotech Internals // Forge BPV V1 // Corksport V2 RSB // Eibach PRO-kit

Stratified Tuned Stage 2 OTS+
273whp/330wtq

SnailD Tuned on Meth
316whp/359wtq

Purple Drank Tuned BNR S4 V2 and 100%Meth
412whp/373wtq


knocturnal is offline   Reply With Quote
 Old 05-22-2015, 06:52 AM   #3
 
shamie's Avatar
 
Join Date: May 2010
Location: SLC, Utah
Posts: 886   (View Stats)
iTrader: (3)
Rep Power: 0
shamie is the leader of the worldshamie is the leader of the worldshamie is the leader of the worldshamie is the leader of the worldshamie is the leader of the worldshamie is the leader of the worldshamie is the leader of the worldshamie is the leader of the worldshamie is the leader of the worldshamie is the leader of the worldshamie is the leader of the world
Thanks: 15
Thanked 488 Times in 278 Posts
Groans: 2
Groaned at 3 Times in 3 Posts
Not Ranked  0 score     
Default

Do you have any option for 1/4" fittings & hose?
__________________
2009 MGM MS3 - / HTP 3"/ COBB AP V3, FMIC, RMM, & DP / AT Internals / Manley Rods & Pistons / ARP studs & bolts / Koyorad radiator / DM PS Cooler & OCCs / ACT Clutch / Bilstein B16 / CS Camber Plates, Camber Arms, & Seals / JBR .125 RSB, 51R Battery Box & Raider's AD / StopTech Brakes
shamie is offline   Reply With Quote
The Following 2 Users Say Thank You to shamie For This Useful Post:
JBR (05-22-2015), udntknw (06-05-2015)
 Old 05-22-2015, 07:28 AM   #4
JBR
Approved MSF Vendor
 
JBR's Avatar
 
Join Date: Sep 2009
Posts: 6,584   (View Stats)
iTrader: (27)
Rep Power: 7092
JBR is the leader of the worldJBR is the leader of the worldJBR is the leader of the worldJBR is the leader of the worldJBR is the leader of the worldJBR is the leader of the worldJBR is the leader of the worldJBR is the leader of the worldJBR is the leader of the worldJBR is the leader of the worldJBR is the leader of the world
Thanks: 7,202
Thanked 13,808 Times in 2,738 Posts
Groans: 28
Groaned at 79 Times in 53 Posts
(Thread Starter)
Not Ranked  0 score     
Default

Originally Posted by shamie View Post
Do you have any option for 1/4" fittings & hose?
No there's not....We tested with the 1/4" fittings and line and found no improvement in response. The valve and 1/8" fittings flow plenty well enough.
__________________

Mazda Performance Parts & Accessories // JamesBaroneRacing.com
JBR is offline   Reply With Quote
 Old 05-22-2015, 09:56 AM   #5
 
shamie's Avatar
 
Join Date: May 2010
Location: SLC, Utah
Posts: 886   (View Stats)
iTrader: (3)
Rep Power: 0
shamie is the leader of the worldshamie is the leader of the worldshamie is the leader of the worldshamie is the leader of the worldshamie is the leader of the worldshamie is the leader of the worldshamie is the leader of the worldshamie is the leader of the worldshamie is the leader of the worldshamie is the leader of the worldshamie is the leader of the world
Thanks: 15
Thanked 488 Times in 278 Posts
Groans: 2
Groaned at 3 Times in 3 Posts
Not Ranked  0 score     
Default

My only issue with the 1/8" is the fittings on the other end (TIP, WGA, and boost source) are usually 1/4".
__________________
2009 MGM MS3 - / HTP 3"/ COBB AP V3, FMIC, RMM, & DP / AT Internals / Manley Rods & Pistons / ARP studs & bolts / Koyorad radiator / DM PS Cooler & OCCs / ACT Clutch / Bilstein B16 / CS Camber Plates, Camber Arms, & Seals / JBR .125 RSB, 51R Battery Box & Raider's AD / StopTech Brakes
shamie is offline   Reply With Quote
 Old 05-22-2015, 10:00 AM   #6
 
portetra000's Avatar
 
Join Date: Jan 2014
Location: Issaquah, WA
Posts: 85   (View Stats)
iTrader: (0)
Rep Power: 0
portetra000 has a reputation beyond reputeportetra000 has a reputation beyond reputeportetra000 has a reputation beyond reputeportetra000 has a reputation beyond reputeportetra000 has a reputation beyond reputeportetra000 has a reputation beyond reputeportetra000 has a reputation beyond reputeportetra000 has a reputation beyond reputeportetra000 has a reputation beyond reputeportetra000 has a reputation beyond reputeportetra000 has a reputation beyond repute
Thanks: 41
Thanked 46 Times in 17 Posts
Groans: 1
Groaned at 0 Times in 0 Posts
Not Ranked  0 score     
Default

Originally Posted by jbarone View Post
Details:
By request of the Mazdaspeed Community, JBR has put together an affordable *3-Port Electronic Boost Controller that utilizes the trusted MAC 35 series valve. No longer do you need to waste your time sourcing the valve, the fittings, the vacuum hose and the hardware separately to make up your own kit. We've done all the work for you and it's all right here in one complete kit at a very reasonable price.



The MAC 35 series is a direct solenoid operated 3-way poppet valve. It features a short stroke solenoid, a balanced poppet and powerful return spring. These features translate into high shifting forces, fast consistent response times, and long life. This valve provides extremely fast response and very high high flow all in a surprisingly small package.

We've made the installation as simple as possible too. It can easily be mounted in the OEM location and plugs directly in to the OEM wiring harness. With the 18" leads, it can be mounted most anywhere with the included mounting bracket, 36" of vacuum hose and mounting hardware.

Features:
- Designed, Engineered and Manufactured in the USA
- Nickel plated vacuum fittings
- Complete kit ready to install
- OEM mounting location

Application:
2006 - 2013 Mazdaspeed 3/6 and CX-7

Includes:
-1 EBCS
-3 1/8" NPT 90 degree vacuum fittings
-1 1/8" NPT Plug
-5 Zip ties
-36" of vacuum hose
-2 Vacuum caps
-1 Vacuum T Connector
-Mounting bracket
-Mounting hardware
-Carries MAC manufacturers warranty
-Shipping is free in the US

*Proper tuning is required for 3-port mode
Take my money
__________________
2007 MS3/Black Mica/JBR 3.5 Aluminum Whale Penis/CP-E catted downpipe/JBR EBC/JBR EGR Blockoff/CX Racing BOV/Corksport cat back exhaust/Cobb lowering springs/AP Tuner/ Stage 2 -self tooned (E85 Stratafied Stage 2 tune for fun days)/JBR 88a RMM/shaved hatch/corksport mudflaps/Dip'd rims/aftermarket boom boom box

portetra000 is offline   Reply With Quote
 Old 05-22-2015, 10:07 AM   #7
 
tegxsi's Avatar
 
Join Date: Oct 2011
Location: San Leandro, CA
Posts: 1,216   (View Stats)
iTrader: (5)
Rep Power: 0
tegxsi is the leader of the worldtegxsi is the leader of the worldtegxsi is the leader of the worldtegxsi is the leader of the worldtegxsi is the leader of the worldtegxsi is the leader of the worldtegxsi is the leader of the worldtegxsi is the leader of the worldtegxsi is the leader of the worldtegxsi is the leader of the worldtegxsi is the leader of the world
Thanks: 451
Thanked 562 Times in 375 Posts
Groans: 80
Groaned at 0 Times in 0 Posts
Not Ranked  0 score     
Default

@jbarone;
OEM mounting location?
Can you share pics of this or will you have an install guide in your support section?
__________________
2018 Audi RS3
2013 CWP Mazdaspeed3 - CS Turbo
2007 Acura TSX 6MT

Last edited by tegxsi; 05-22-2015 at 10:18 AM.
tegxsi is offline   Reply With Quote
The Following User Says Thank You to tegxsi For This Useful Post:
JBR (05-22-2015)
 Old 05-22-2015, 12:10 PM   #8
 
Ksky90's Avatar
 
Join Date: May 2014
Location: Bonney Lake, WA
Posts: 1,026   (View Stats)
iTrader: (4)
Rep Power: 0
Ksky90 is the leader of the worldKsky90 is the leader of the worldKsky90 is the leader of the worldKsky90 is the leader of the worldKsky90 is the leader of the worldKsky90 is the leader of the worldKsky90 is the leader of the worldKsky90 is the leader of the worldKsky90 is the leader of the worldKsky90 is the leader of the worldKsky90 is the leader of the world
Thanks: 261
Thanked 307 Times in 225 Posts
Groans: 1
Groaned at 0 Times in 0 Posts
Not Ranked  0 score     
Default

How does this compare to the other EBCS on the market? I.E CorkSport, Stratified, Grimmspeed, or Cobb? Just cheaper?
__________________
Had a Big Turbo '13 Speed3 WMI and 400 ponies.

Now I have a '13 WRX and zero ponies
Ksky90 is offline   Reply With Quote
 Old 05-22-2015, 05:00 PM   #9
JBR
Approved MSF Vendor
 
JBR's Avatar
 
Join Date: Sep 2009
Posts: 6,584   (View Stats)
iTrader: (27)
Rep Power: 7092
JBR is the leader of the worldJBR is the leader of the worldJBR is the leader of the worldJBR is the leader of the worldJBR is the leader of the worldJBR is the leader of the worldJBR is the leader of the worldJBR is the leader of the worldJBR is the leader of the worldJBR is the leader of the worldJBR is the leader of the world
Thanks: 7,202
Thanked 13,808 Times in 2,738 Posts
Groans: 28
Groaned at 79 Times in 53 Posts
(Thread Starter)
Not Ranked  0 score     
Default

Originally Posted by shamie View Post
My only issue with the 1/8" is the fittings on the other end (TIP, WGA, and boost source) are usually 1/4".
Ahhh...I think I see where there's some confusion here. The threaded part of the fitting is 1/8" NPT. The actual vacuum nipple is 3/16", the same as the waste gate, bypass valve and the vent port on the turbo inlet pipe.
__________________

Mazda Performance Parts & Accessories // JamesBaroneRacing.com
JBR is offline   Reply With Quote
The Following 3 Users Say Thank You to JBR For This Useful Post:
AwAfrican (07-16-2016), impossible (05-27-2016), Mauro_Penguin (05-22-2015)
 Old 05-22-2015, 07:07 PM   #10
 
fz6brian's Avatar
 
Join Date: Dec 2009
Location: South Jersey
Posts: 99   (View Stats)
iTrader: (0)
Rep Power: 0
fz6brian has a reputation beyond reputefz6brian has a reputation beyond reputefz6brian has a reputation beyond reputefz6brian has a reputation beyond reputefz6brian has a reputation beyond reputefz6brian has a reputation beyond reputefz6brian has a reputation beyond reputefz6brian has a reputation beyond reputefz6brian has a reputation beyond reputefz6brian has a reputation beyond reputefz6brian has a reputation beyond repute
Thanks: 18
Thanked 44 Times in 29 Posts
Groans: 0
Groaned at 0 Times in 0 Posts
Not Ranked  0 score     
Default

Dam your irresistible pricing!

Order placed.
JBR likes this.
__________________
09 CWP MS3
AP V3, AT HPFP, CPE DP SRI TIP & RMM, Forge V2 BPV, JBR SSP & DMM & PMM 3 port EBCS, Damond OCC, TR8 FMIC
Bilstein struts, Moog endlinks, Energy Suspension swabar bushings
fz6brian is offline   Reply With Quote
The Following User Says Thank You to fz6brian For This Useful Post:
JBR (05-22-2015)
 Old 05-22-2015, 07:52 PM   #11
 
speedfreak44's Avatar
 
Join Date: Dec 2013
Location: Tampa, Florida
Posts: 1,391   (View Stats)
iTrader: (8)
Rep Power: 0
speedfreak44 is the leader of the worldspeedfreak44 is the leader of the worldspeedfreak44 is the leader of the worldspeedfreak44 is the leader of the worldspeedfreak44 is the leader of the worldspeedfreak44 is the leader of the worldspeedfreak44 is the leader of the worldspeedfreak44 is the leader of the worldspeedfreak44 is the leader of the worldspeedfreak44 is the leader of the worldspeedfreak44 is the leader of the world
Thanks: 462
Thanked 581 Times in 387 Posts
Groans: 10
Groaned at 3 Times in 2 Posts
Not Ranked  0 score     
Default

I was eyeballing this piece a few days ago on the website. Price is perfect. Need to find a reason to purchase now
__________________
The line up:
2013 G37 loaded...not stock for long
2013 MS3...stock to midturbo back to stock (traded)
2009 Nissan Frontier LE loaded...big stereo system (traded)
2009 Cadillac CTS sport package...stock (blown and traded piece of shit)
1994 Integra RS built all motor (sold)
1990 Civic EF nitrous turbo motor swapped beast (sold)
1987 Dodge pick up...jacked up (sold)
speedfreak44 is offline   Reply With Quote
 Old 05-22-2015, 07:54 PM   #12
JBR
Approved MSF Vendor
 
JBR's Avatar
 
Join Date: Sep 2009
Posts: 6,584   (View Stats)
iTrader: (27)
Rep Power: 7092
JBR is the leader of the worldJBR is the leader of the worldJBR is the leader of the worldJBR is the leader of the worldJBR is the leader of the worldJBR is the leader of the worldJBR is the leader of the worldJBR is the leader of the worldJBR is the leader of the worldJBR is the leader of the worldJBR is the leader of the world
Thanks: 7,202
Thanked 13,808 Times in 2,738 Posts
Groans: 28
Groaned at 79 Times in 53 Posts
(Thread Starter)
Not Ranked  0 score     
Default

Originally Posted by tegxsi View Post
@jbarone;
OEM mounting location?
Can you share pics of this or will you have an install guide in your support section?
Mounts on the ear where the coolant line is bolted.
Attached Images
File Type: jpg IMG_8652.JPG (179.3 KB, 109 views)
File Type: jpg IMG_8654.JPG (169.5 KB, 79 views)
Mauro_Penguin likes this.
__________________

Mazda Performance Parts & Accessories // JamesBaroneRacing.com
JBR is offline   Reply With Quote
The Following 3 Users Say Thank You to JBR For This Useful Post:
EwMPS (08-25-2017), Mauro_Penguin (05-22-2015), tegxsi (05-22-2015)
 Old 05-22-2015, 07:56 PM   #13
JBR
Approved MSF Vendor
 
JBR's Avatar
 
Join Date: Sep 2009
Posts: 6,584   (View Stats)
iTrader: (27)
Rep Power: 7092
JBR is the leader of the worldJBR is the leader of the worldJBR is the leader of the worldJBR is the leader of the worldJBR is the leader of the worldJBR is the leader of the worldJBR is the leader of the worldJBR is the leader of the worldJBR is the leader of the worldJBR is the leader of the worldJBR is the leader of the world
Thanks: 7,202
Thanked 13,808 Times in 2,738 Posts
Groans: 28
Groaned at 79 Times in 53 Posts
(Thread Starter)
Not Ranked  0 score     
Default

Originally Posted by speedfreak44 View Post
I was eyeballing this piece a few days ago on the website. Price is perfect. Need to find a reason to purchase now
Because it's 10% off with webcode MEM2015 is a pretty good reason.
__________________

Mazda Performance Parts & Accessories // JamesBaroneRacing.com
JBR is offline   Reply With Quote
The Following 6 Users Say Thank You to JBR For This Useful Post:
Chief_Wiggum (05-23-2015), Mauro_Penguin (05-22-2015), MD1032 (05-29-2015), portetra000 (05-27-2015), speedfreak44 (05-22-2015), udntknw (06-05-2015)
 Old 05-22-2015, 08:08 PM   #14
 
speedfreak44's Avatar
 
Join Date: Dec 2013
Location: Tampa, Florida
Posts: 1,391   (View Stats)
iTrader: (8)
Rep Power: 0
speedfreak44 is the leader of the worldspeedfreak44 is the leader of the worldspeedfreak44 is the leader of the worldspeedfreak44 is the leader of the worldspeedfreak44 is the leader of the worldspeedfreak44 is the leader of the worldspeedfreak44 is the leader of the worldspeedfreak44 is the leader of the worldspeedfreak44 is the leader of the worldspeedfreak44 is the leader of the worldspeedfreak44 is the leader of the world
Thanks: 462
Thanked 581 Times in 387 Posts
Groans: 10
Groaned at 3 Times in 2 Posts
Not Ranked  0 score     
Default

Wait I missed that part...is that on your website? All products?!
__________________
The line up:
2013 G37 loaded...not stock for long
2013 MS3...stock to midturbo back to stock (traded)
2009 Nissan Frontier LE loaded...big stereo system (traded)
2009 Cadillac CTS sport package...stock (blown and traded piece of shit)
1994 Integra RS built all motor (sold)
1990 Civic EF nitrous turbo motor swapped beast (sold)
1987 Dodge pick up...jacked up (sold)
speedfreak44 is offline   Reply With Quote
 Old 05-22-2015, 08:10 PM   #15
JBR
Approved MSF Vendor
 
JBR's Avatar
 
Join Date: Sep 2009
Posts: 6,584   (View Stats)
iTrader: (27)
Rep Power: 7092
JBR is the leader of the worldJBR is the leader of the worldJBR is the leader of the worldJBR is the leader of the worldJBR is the leader of the worldJBR is the leader of the worldJBR is the leader of the worldJBR is the leader of the worldJBR is the leader of the worldJBR is the leader of the worldJBR is the leader of the world
Thanks: 7,202
Thanked 13,808 Times in 2,738 Posts
Groans: 28
Groaned at 79 Times in 53 Posts
(Thread Starter)
Not Ranked  0 score     
Default

Originally Posted by speedfreak44 View Post
Wait I missed that part...is that on your website? All products?!
JBR's Memorial Day Sale Starts NOW!!
__________________

Mazda Performance Parts & Accessories // JamesBaroneRacing.com
JBR is offline   Reply With Quote
 Old 05-22-2015, 08:11 PM   #16
 
speedfreak44's Avatar
 
Join Date: Dec 2013
Location: Tampa, Florida
Posts: 1,391   (View Stats)
iTrader: (8)
Rep Power: 0
speedfreak44 is the leader of the worldspeedfreak44 is the leader of the worldspeedfreak44 is the leader of the worldspeedfreak44 is the leader of the worldspeedfreak44 is the leader of the worldspeedfreak44 is the leader of the worldspeedfreak44 is the leader of the worldspeedfreak44 is the leader of the worldspeedfreak44 is the leader of the worldspeedfreak44 is the leader of the worldspeedfreak44 is the leader of the world
Thanks: 462
Thanked 581 Times in 387 Posts
Groans: 10
Groaned at 3 Times in 2 Posts
Not Ranked  0 score     
Default

Fuck man you make me not want to eat this week
__________________
The line up:
2013 G37 loaded...not stock for long
2013 MS3...stock to midturbo back to stock (traded)
2009 Nissan Frontier LE loaded...big stereo system (traded)
2009 Cadillac CTS sport package...stock (blown and traded piece of shit)
1994 Integra RS built all motor (sold)
1990 Civic EF nitrous turbo motor swapped beast (sold)
1987 Dodge pick up...jacked up (sold)
speedfreak44 is offline   Reply With Quote
 Old 05-29-2015, 07:51 PM   #17
 
fz6brian's Avatar
 
Join Date: Dec 2009
Location: South Jersey
Posts: 99   (View Stats)
iTrader: (0)
Rep Power: 0
fz6brian has a reputation beyond reputefz6brian has a reputation beyond reputefz6brian has a reputation beyond reputefz6brian has a reputation beyond reputefz6brian has a reputation beyond reputefz6brian has a reputation beyond reputefz6brian has a reputation beyond reputefz6brian has a reputation beyond reputefz6brian has a reputation beyond reputefz6brian has a reputation beyond reputefz6brian has a reputation beyond repute
Thanks: 18
Thanked 44 Times in 29 Posts
Groans: 0
Groaned at 0 Times in 0 Posts
Not Ranked  0 score     
Default

Got it, installed it, tuned for it and wrote revision tune to play with tomorrow. I took off the TIP to get a little more room to work. Mounting it on the coolant line bracket is nice and neat but makes getting on the hose clamp on the TIP a bit more difficult.
JBR likes this.
__________________
09 CWP MS3
AP V3, AT HPFP, CPE DP SRI TIP & RMM, Forge V2 BPV, JBR SSP & DMM & PMM 3 port EBCS, Damond OCC, TR8 FMIC
Bilstein struts, Moog endlinks, Energy Suspension swabar bushings
fz6brian is offline   Reply With Quote
The Following User Says Thank You to fz6brian For This Useful Post:
JBR (05-29-2015)
 Old 06-02-2015, 11:19 AM   #18
 
Ksky90's Avatar
 
Join Date: May 2014
Location: Bonney Lake, WA
Posts: 1,026   (View Stats)
iTrader: (4)
Rep Power: 0
Ksky90 is the leader of the worldKsky90 is the leader of the worldKsky90 is the leader of the worldKsky90 is the leader of the worldKsky90 is the leader of the worldKsky90 is the leader of the worldKsky90 is the leader of the worldKsky90 is the leader of the worldKsky90 is the leader of the worldKsky90 is the leader of the worldKsky90 is the leader of the world
Thanks: 261
Thanked 307 Times in 225 Posts
Groans: 1
Groaned at 0 Times in 0 Posts
Not Ranked  0 score     
Default

I installed mine on the tip stud. Looks stock and blends in well.
JBR likes this.
__________________
Had a Big Turbo '13 Speed3 WMI and 400 ponies.

Now I have a '13 WRX and zero ponies
Ksky90 is offline   Reply With Quote
The Following User Says Thank You to Ksky90 For This Useful Post:
JBR (06-02-2015)
 Old 06-03-2015, 03:30 PM   #19
 
Ksky90's Avatar
 
Join Date: May 2014
Location: Bonney Lake, WA
Posts: 1,026   (View Stats)
iTrader: (4)
Rep Power: 0
Ksky90 is the leader of the worldKsky90 is the leader of the worldKsky90 is the leader of the worldKsky90 is the leader of the worldKsky90 is the leader of the worldKsky90 is the leader of the worldKsky90 is the leader of the worldKsky90 is the leader of the worldKsky90 is the leader of the worldKsky90 is the leader of the worldKsky90 is the leader of the world
Thanks: 261
Thanked 307 Times in 225 Posts
Groans: 1
Groaned at 0 Times in 0 Posts
Not Ranked  0 score     
Default



Mind the mess, I am painting my valve cover. Looks good and blends in well. I approve. Thanks Jamie!
JBR likes this.
__________________
Had a Big Turbo '13 Speed3 WMI and 400 ponies.

Now I have a '13 WRX and zero ponies
Ksky90 is offline   Reply With Quote
The Following 2 Users Say Thank You to Ksky90 For This Useful Post:
impossible (05-27-2016), JBR (06-03-2015)
 Old 06-03-2015, 08:24 PM   #20
JBR
Approved MSF Vendor
 
JBR's Avatar
 
Join Date: Sep 2009
Posts: 6,584   (View Stats)
iTrader: (27)
Rep Power: 7092
JBR is the leader of the worldJBR is the leader of the worldJBR is the leader of the worldJBR is the leader of the worldJBR is the leader of the worldJBR is the leader of the worldJBR is the leader of the worldJBR is the leader of the worldJBR is the leader of the worldJBR is the leader of the worldJBR is the leader of the world
Thanks: 7,202
Thanked 13,808 Times in 2,738 Posts
Groans: 28
Groaned at 79 Times in 53 Posts
(Thread Starter)
Not Ranked  0 score     
Default

Originally Posted by Ksky90 View Post


Mind the mess, I am painting my valve cover. Looks good and blends in well. I approve. Thanks Jamie!
Looks great!! You've got several other nice parts there too. Post some finished pics. Better yet, email me some nice ones and I'll post them up on our Facebook page.
__________________

Mazda Performance Parts & Accessories // JamesBaroneRacing.com
JBR is offline   Reply With Quote
The Following 2 Users Say Thank You to JBR For This Useful Post:
impossible (05-27-2016), Ksky90 (06-04-2015)
 Old 06-03-2015, 08:26 PM   #21
 
Ksky90's Avatar
 
Join Date: May 2014
Location: Bonney Lake, WA
Posts: 1,026   (View Stats)
iTrader: (4)
Rep Power: 0
Ksky90 is the leader of the worldKsky90 is the leader of the worldKsky90 is the leader of the worldKsky90 is the leader of the worldKsky90 is the leader of the worldKsky90 is the leader of the worldKsky90 is the leader of the worldKsky90 is the leader of the worldKsky90 is the leader of the worldKsky90 is the leader of the worldKsky90 is the leader of the world
Thanks: 261
Thanked 307 Times in 225 Posts
Groans: 1
Groaned at 0 Times in 0 Posts
Not Ranked  0 score     
Default

Originally Posted by jbarone View Post
Looks great!! You've got several other nice parts there too. Post some finished pics. Better yet, email me some nice ones and I'll post them up on our Facebook page.
You got it chief!

Funnily enough I used to have mostly CorkSport stuff. Now its yours and I much prefer your products. Always the best stuff!
JBR likes this.
__________________
Had a Big Turbo '13 Speed3 WMI and 400 ponies.

Now I have a '13 WRX and zero ponies
Ksky90 is offline   Reply With Quote
The Following User Says Thank You to Ksky90 For This Useful Post:
JBR (06-03-2015)
 Old 06-03-2015, 08:33 PM   #22
 
breakfstincluded's Avatar
 
Join Date: May 2011
Location: Portland OR
Posts: 3,588   (View Stats)
iTrader: (9)
Rep Power: 0
breakfstincluded is the leader of the worldbreakfstincluded is the leader of the worldbreakfstincluded is the leader of the worldbreakfstincluded is the leader of the worldbreakfstincluded is the leader of the worldbreakfstincluded is the leader of the worldbreakfstincluded is the leader of the worldbreakfstincluded is the leader of the worldbreakfstincluded is the leader of the worldbreakfstincluded is the leader of the worldbreakfstincluded is the leader of the world
Thanks: 6,451
Thanked 4,246 Times in 1,481 Posts
Groans: 261
Groaned at 20 Times in 20 Posts
Not Ranked  0 score     
Default

I believe the newish corksport EBCS, is based on the newer bullet-style EBCS from MAC.

I know Perrin also has used that bullet style mac valve for their EBCS for quite some time now.

So my question is, I kind of thought that bullet valve would become the basis for any new EBCS that might come out.

Since the JBR is the traditional block shaped MAC valve like Cobb/Grimm/Stratified, does that mean you found that the newer bullet style mac valve isn't much better?

__________________
Genwin Individual Throttle Body Webers 20B Swapped 1UZ w/ Hi-Cap Purple Loush and Trigonometric Valve Tumblers. Thetan Core Fogger System. P1@n0 Tuned to Load Burst Limit. Glacier Red '07.

breakfstincluded is offline   Reply With Quote
 Old 06-04-2015, 04:50 PM   #23
JBR
Approved MSF Vendor
 
JBR's Avatar
 
Join Date: Sep 2009
Posts: 6,584   (View Stats)
iTrader: (27)
Rep Power: 7092
JBR is the leader of the worldJBR is the leader of the worldJBR is the leader of the worldJBR is the leader of the worldJBR is the leader of the worldJBR is the leader of the worldJBR is the leader of the worldJBR is the leader of the worldJBR is the leader of the worldJBR is the leader of the worldJBR is the leader of the world
Thanks: 7,202
Thanked 13,808 Times in 2,738 Posts
Groans: 28
Groaned at 79 Times in 53 Posts
(Thread Starter)
Not Ranked  0 score     
Default

Originally Posted by breakfstincluded View Post
I believe the newish corksport EBCS, is based on the newer bullet-style EBCS from MAC.

I know Perrin also has used that bullet style mac valve for their EBCS for quite some time now.

So my question is, I kind of thought that bullet valve would become the basis for any new EBCS that might come out.

Since the JBR is the traditional block shaped MAC valve like Cobb/Grimm/Stratified, does that mean you found that the newer bullet style mac valve isn't much better?


We tested the bullet valve and we were unable able to capture any measurable data to support that it performed any better than the 35xx series. We took that data when we met with MAC and asked the very same question. The response was "This is a rather crude application to need or use a valve as advanced as the bullet valve". With that, we elected to not pursue the use of it.



Ksky90 likes this.
__________________

Mazda Performance Parts & Accessories // JamesBaroneRacing.com
JBR is offline   Reply With Quote
The Following 10 Users Say Thank You to JBR For This Useful Post:
Addikted To Boost (06-04-2015), breakfstincluded (06-04-2015), impossible (05-27-2016), ItsNox (06-04-2015), JgamB (06-06-2015), Johnny_Law (07-09-2016), Mauro_Penguin (06-04-2015), MD1032 (06-05-2015), Raider (06-05-2015), XxSmarTz (06-11-2015)
 Old 06-04-2015, 05:01 PM   #24
 
breakfstincluded's Avatar
 
Join Date: May 2011
Location: Portland OR
Posts: 3,588   (View Stats)
iTrader: (9)
Rep Power: 0
breakfstincluded is the leader of the worldbreakfstincluded is the leader of the worldbreakfstincluded is the leader of the worldbreakfstincluded is the leader of the worldbreakfstincluded is the leader of the worldbreakfstincluded is the leader of the worldbreakfstincluded is the leader of the worldbreakfstincluded is the leader of the worldbreakfstincluded is the leader of the worldbreakfstincluded is the leader of the worldbreakfstincluded is the leader of the world
Thanks: 6,451
Thanked 4,246 Times in 1,481 Posts
Groans: 261
Groaned at 20 Times in 20 Posts
Not Ranked  0 score     
Default

Thanks for the explanation, I wonder would mac would consider an exemplary application for that valve then lol
__________________
Genwin Individual Throttle Body Webers 20B Swapped 1UZ w/ Hi-Cap Purple Loush and Trigonometric Valve Tumblers. Thetan Core Fogger System. P1@n0 Tuned to Load Burst Limit. Glacier Red '07.

breakfstincluded is offline   Reply With Quote
 Old 06-04-2015, 05:17 PM   #25
JBR
Approved MSF Vendor
 
JBR's Avatar
 
Join Date: Sep 2009
Posts: 6,584   (View Stats)
iTrader: (27)
Rep Power: 7092
JBR is the leader of the worldJBR is the leader of the worldJBR is the leader of the worldJBR is the leader of the worldJBR is the leader of the worldJBR is the leader of the worldJBR is the leader of the worldJBR is the leader of the worldJBR is the leader of the worldJBR is the leader of the worldJBR is the leader of the world
Thanks: 7,202
Thanked 13,808 Times in 2,738 Posts
Groans: 28
Groaned at 79 Times in 53 Posts
(Thread Starter)
Not Ranked  0 score     
Default

Originally Posted by breakfstincluded View Post
Thanks for the explanation, I wonder would mac would consider an exemplary application for that valve then lol
Hi-speed automation is one commonly used area for it.
__________________

Mazda Performance Parts & Accessories // JamesBaroneRacing.com
JBR is offline   Reply With Quote
The Following 2 Users Say Thank You to JBR For This Useful Post:
breakfstincluded (06-04-2015), ItsNox (06-04-2015)
 Old 06-05-2015, 03:49 AM   #26
 
MD1032's Avatar
 
Join Date: Mar 2013
Location: North Brunswick, NJ
Posts: 2,622   (View Stats)
iTrader: (2)
Rep Power: 1102
MD1032 is the leader of the worldMD1032 is the leader of the worldMD1032 is the leader of the worldMD1032 is the leader of the worldMD1032 is the leader of the worldMD1032 is the leader of the worldMD1032 is the leader of the worldMD1032 is the leader of the worldMD1032 is the leader of the worldMD1032 is the leader of the worldMD1032 is the leader of the world
Thanks: 4,640
Thanked 1,960 Times in 1,065 Posts
Groans: 139
Groaned at 5 Times in 5 Posts
Not Ranked  0 score     
Default

That's nice that you at least looked into the bullet valve to determine whether it was worthwhile at any rate.

What a nice little kit with a great price. This will save a lot of people some time and money.
__________________
2007 Mazdaspeed3 GT
MD1032 is offline   Reply With Quote
The Following 2 Users Say Thank You to MD1032 For This Useful Post:
impossible (05-27-2016), JBR (06-06-2015)
 Old 06-05-2015, 08:02 AM   #27
 
HawkeyeGeoff's Avatar
 
Join Date: Mar 2012
Location: Waterford, MI - America's High Five
Posts: 3,036   (View Stats)
iTrader: (3)
Rep Power: 0
HawkeyeGeoff is the leader of the worldHawkeyeGeoff is the leader of the worldHawkeyeGeoff is the leader of the worldHawkeyeGeoff is the leader of the worldHawkeyeGeoff is the leader of the worldHawkeyeGeoff is the leader of the worldHawkeyeGeoff is the leader of the worldHawkeyeGeoff is the leader of the worldHawkeyeGeoff is the leader of the worldHawkeyeGeoff is the leader of the worldHawkeyeGeoff is the leader of the world
Thanks: 2,451
Thanked 2,707 Times in 1,397 Posts
Groans: 13
Groaned at 23 Times in 13 Posts
Not Ranked  0 score     
Default

Damn. Haha I was making these for a while....good price man!
JBR likes this.
__________________
Silver 2007 Speed3 GT
Xona Rotor 6156, Port Injection w/ E85...Bunch of other stuff. I make some power.
Titanium Grey Mazdaspeed6 GTX3071, DD
HawkeyeGeoff is offline   Reply With Quote
The Following User Says Thank You to HawkeyeGeoff For This Useful Post:
JBR (06-06-2015)
 Old 06-06-2015, 11:42 AM   #28
 
Sinister_Speed3's Avatar
 
Join Date: Jul 2011
Location: LAX
Posts: 180   (View Stats)
iTrader: (1)
Rep Power: 133
Sinister_Speed3 has a reputation beyond reputeSinister_Speed3 has a reputation beyond reputeSinister_Speed3 has a reputation beyond reputeSinister_Speed3 has a reputation beyond reputeSinister_Speed3 has a reputation beyond reputeSinister_Speed3 has a reputation beyond reputeSinister_Speed3 has a reputation beyond reputeSinister_Speed3 has a reputation beyond reputeSinister_Speed3 has a reputation beyond reputeSinister_Speed3 has a reputation beyond reputeSinister_Speed3 has a reputation beyond repute
Thanks: 31
Thanked 92 Times in 46 Posts
Groans: 0
Groaned at 0 Times in 0 Posts
Not Ranked  0 score     
Default

How well will this work with stock 2 port setting? Does it require and special changes to the tune? I just broke my ecbs, wanted to see if this is a better option than cheap/expensive mazda replacements. @jbarone;

Thanks in advance, I am going to try and get this ordered today if it is a better alternative
Sinister_Speed3 is offline   Reply With Quote
 Old 06-06-2015, 11:42 AM   #29
 
Ksky90's Avatar
 
Join Date: May 2014
Location: Bonney Lake, WA
Posts: 1,026   (View Stats)
iTrader: (4)
Rep Power: 0
Ksky90 is the leader of the worldKsky90 is the leader of the worldKsky90 is the leader of the worldKsky90 is the leader of the worldKsky90 is the leader of the worldKsky90 is the leader of the worldKsky90 is the leader of the worldKsky90 is the leader of the worldKsky90 is the leader of the worldKsky90 is the leader of the worldKsky90 is the leader of the world
Thanks: 261
Thanked 307 Times in 225 Posts
Groans: 1
Groaned at 0 Times in 0 Posts
Not Ranked  0 score     
Default

If you use it in bleed/2port mode it functions the same as the stock solenoid.
__________________
Had a Big Turbo '13 Speed3 WMI and 400 ponies.

Now I have a '13 WRX and zero ponies
Ksky90 is offline   Reply With Quote
The Following User Says Thank You to Ksky90 For This Useful Post:
JBR (06-06-2015)
 Old 06-06-2015, 05:43 PM   #30
 
Sinister_Speed3's Avatar
 
Join Date: Jul 2011
Location: LAX
Posts: 180   (View Stats)
iTrader: (1)
Rep Power: 133
Sinister_Speed3 has a reputation beyond reputeSinister_Speed3 has a reputation beyond reputeSinister_Speed3 has a reputation beyond reputeSinister_Speed3 has a reputation beyond reputeSinister_Speed3 has a reputation beyond reputeSinister_Speed3 has a reputation beyond reputeSinister_Speed3 has a reputation beyond reputeSinister_Speed3 has a reputation beyond reputeSinister_Speed3 has a reputation beyond reputeSinister_Speed3 has a reputation beyond reputeSinister_Speed3 has a reputation beyond repute
Thanks: 31
Thanked 92 Times in 46 Posts
Groans: 0
Groaned at 0 Times in 0 Posts
Not Ranked  0 score     
Default

Just ordered it after a frustrating day of install. I am going to assume based off other 3-port/2 port installs that the left goes to the TIP and the right goes to the wastegate (based on the picture in the first post)

-nick
Sinister_Speed3 is offline   Reply With Quote
The Following User Says Thank You to Sinister_Speed3 For This Useful Post:
JBR (06-06-2015)
 Old 06-11-2015, 03:55 PM   #31
 
Sinister_Speed3's Avatar
 
Join Date: Jul 2011
Location: LAX
Posts: 180   (View Stats)
iTrader: (1)
Rep Power: 133
Sinister_Speed3 has a reputation beyond reputeSinister_Speed3 has a reputation beyond reputeSinister_Speed3 has a reputation beyond reputeSinister_Speed3 has a reputation beyond reputeSinister_Speed3 has a reputation beyond reputeSinister_Speed3 has a reputation beyond reputeSinister_Speed3 has a reputation beyond reputeSinister_Speed3 has a reputation beyond reputeSinister_Speed3 has a reputation beyond reputeSinister_Speed3 has a reputation beyond reputeSinister_Speed3 has a reputation beyond repute
Thanks: 31
Thanked 92 Times in 46 Posts
Groans: 0
Groaned at 0 Times in 0 Posts
Not Ranked  0 score     
Default

When I look at the stratified 2 port bleed mode it shows a "restrictor" from the boost source. Do I need to run one? Does the t set up need to be the same as well? I did not see a 2 port set up in the instructions @jbarone;

Thanks
Sinister_Speed3 is offline   Reply With Quote
 Old 06-13-2015, 06:49 AM   #32
 
fz6brian's Avatar
 
Join Date: Dec 2009
Location: South Jersey
Posts: 99   (View Stats)
iTrader: (0)
Rep Power: 0
fz6brian has a reputation beyond reputefz6brian has a reputation beyond reputefz6brian has a reputation beyond reputefz6brian has a reputation beyond reputefz6brian has a reputation beyond reputefz6brian has a reputation beyond reputefz6brian has a reputation beyond reputefz6brian has a reputation beyond reputefz6brian has a reputation beyond reputefz6brian has a reputation beyond reputefz6brian has a reputation beyond repute
Thanks: 18
Thanked 44 Times in 29 Posts
Groans: 0
Groaned at 0 Times in 0 Posts
Not Ranked  0 score     
Default

Originally Posted by Sinister_Speed3 View Post
When I look at the stratified 2 port bleed mode it shows a "restrictor" from the boost source. Do I need to run one? Does the t set up need to be the same as well? I did not see a 2 port set up in the instructions

Thanks
The k04 has a restrictor pill in the nipple on the turbo compressor housing. 2 port needs the restrictor. Search for grimmspeed instructions, they show how to hook it up in 2 port. You can hook it up to the stock hoses. The second port on the WGA acts like a T in the stock system. I just don't remember what port goes where. Or you can cap off one of the ports on the WGA and put a T in the line from the boost source (w/restrictor pill) to the WGA.

Hope that makes sense to you.
__________________
09 CWP MS3
AP V3, AT HPFP, CPE DP SRI TIP & RMM, Forge V2 BPV, JBR SSP & DMM & PMM 3 port EBCS, Damond OCC, TR8 FMIC
Bilstein struts, Moog endlinks, Energy Suspension swabar bushings
fz6brian is offline   Reply With Quote
 Old 07-09-2016, 12:44 PM   #33
 
Franky-5-Fingaz's Avatar
 
Join Date: Jun 2013
Location: Northern V.A
Posts: 25   (View Stats)
iTrader: (0)
Rep Power: 0
Franky-5-Fingaz is a jewel in the roughFranky-5-Fingaz is a jewel in the roughFranky-5-Fingaz is a jewel in the roughFranky-5-Fingaz is a jewel in the rough
Thanks: 22
Thanked 7 Times in 7 Posts
Groans: 0
Groaned at 1 Time in 1 Post
Not Ranked  0 score     
Default

Just installed mine earlier today (3-port); made the necessary changes to WGDC in my tune, and set off to begin the adventure. Already i can see the boost reacting more responsively. Starting at 15 WGDC is no fun it looks like the highest boost i could get on the initial run was 11 PSI (normal for the first run with the extremely lower WGDC, right?). I'll start moving it up and see how it goes.

One thing I would recommend; include more Zip-Ties!! (You can never have enough zip-ties).

Great solenoid from what i'm seeing so far Mr. James Barone, keep up the good work.
JBR likes this.
Franky-5-Fingaz is offline   Reply With Quote
The Following User Says Thank You to Franky-5-Fingaz For This Useful Post:
JBR (07-09-2016)
 Old 01-10-2017, 07:12 AM   #34
JBR
Approved MSF Vendor
 
JBR's Avatar
 
Join Date: Sep 2009
Posts: 6,584   (View Stats)
iTrader: (27)
Rep Power: 7092
JBR is the leader of the worldJBR is the leader of the worldJBR is the leader of the worldJBR is the leader of the worldJBR is the leader of the worldJBR is the leader of the worldJBR is the leader of the worldJBR is the leader of the worldJBR is the leader of the worldJBR is the leader of the worldJBR is the leader of the world
Thanks: 7,202
Thanked 13,808 Times in 2,738 Posts
Groans: 28
Groaned at 79 Times in 53 Posts
(Thread Starter)
Not Ranked  0 score     
Default

Just completed building 100 more EBCS kits!
__________________

Mazda Performance Parts & Accessories // JamesBaroneRacing.com
JBR is offline   Reply With Quote
The Following User Says Thank You to JBR For This Useful Post:
Varomnia (01-10-2017)
 Old 02-23-2018, 02:05 PM   #35
Banned
 
hichamaziz's Avatar
 
Join Date: Feb 2018
Posts: 9   (View Stats)
iTrader: (0)
Rep Power: 0
hichamaziz can only hope to improve
Thanks: 0
Thanked 2 Times in 2 Posts
Groans: 0
Groaned at 24 Times in 9 Posts
Not Ranked  0 score     
Default

thank you for post it interesting for me
hichamaziz is offline   Reply With Quote
The Following User Says NO Thank You to hichamaziz For This Un-useful Post:
JSmith (02-23-2018)
 Old 03-30-2018, 06:14 AM   #36
 
Shenika's Avatar
 
Join Date: Mar 2018
Posts: 2   (View Stats)
iTrader: (0)
Rep Power: 0
Shenika is an unknown quantity at this point
Thanks: 0
Thanked 0 Times in 0 Posts
Groans: 0
Groaned at 0 Times in 0 Posts
Not Ranked  0 score     
Default

Heeeeey and thank you for the affordable pricing.Some of us builders do have to put family first at times this
 really helps
Shenika is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -7. The time now is 10:41 AM.
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
SEO by vBSEO ©2011, Crawlability, Inc.
vB.Sponsors
Template-Modifications by TMS
©Copyright 2008 ; 2018 Cymru Internet Services LLC | FYHN™ Autosports HQ
Ad Management plugin by RedTyger
Page generated in 0.56065 seconds with 35 queries