Fuckin badass Jamie, keep doing what you're doing.

Count me in for recirc and Ko4 fitting

+1

Is 3.5" the ID or OD? I assumed ID, but your coupler sizes confused me. If 3.5" is OD, what is ID? Thx.

In the other thread he said that an air straightener would not be included.

http://www.mazdaspeedforums.org/foru...2/#post1371323

I'm in.

I'd like both couplers if that's possible. Obviously I'd pay for the extra one. If not then just the 4" BT coupler.

No re-circ.

I was wondering when someone was going to be smart and corner the market with a 1 piece intake/TIP. You are the man. Now I have to sell my Cobb combo for this!

This is awesome. I just bought a HTP inlet. If I decide to go BT in the future I want WP intake.

Count me in.

Thanks for the outstanding response guys! I have updated the OP with answers to all your questions, please read it carefully.

Below is the current pre-order list, please add your options.


Black Metal - With Recirc & Stock Coupler
fooqr -
dpolseno41 - With Recirc & Stock Coupler
BPASPEED -
Ziggo - No Recirc & Stock Coupler
s1xstringmayhem -
Mase -
RobLoMS3 - With Recirc & Stock Coupler
neonracer27 - With Recirc & Stock Coupler
Ezekiel81923 - No Recirc, Stock and 4" Coupler
MS3Ghost -

Thanks,
Jamie

Stock coupler with recirc for me. Can you confirm that there will or won't be an air straightener?

I'm in. @jbarone

Jdub0802 - With Recirc & Stock Coupler

Im interested in the setup with recirc and stock coupler but Im curious on the no airflow straightener.

@jbarone you said in the initial thread that it wasnt needed, yet I see some people having issues with idle LTFTs without one.

Put me on the list. Black with Recirc and 4" coupler.

Sent from my Galaxy Nexus using Tapatalk 2

With recirc, both couplers. Thx for add'l info.

Sent from my DROID2 using Tapatalk 2

I just got my honeycomb and ltft at idle are still retarded. Waiting for it to settle to try a maf cal again and see what happens.

Our testing has not needed one. That's not to say that some won't, all these cars can be different and not one tune will work on them all.

My LTFT's @ hot idle are -0.8

Thanks,
Jamie

Well I hope I'm not your test MS6 but if you haven't gotten a test fit by the time you can ship I'll still take one.

No recirc and stock coupler for me please. Thank you! :cool2:

I don't see a 3.5" inlet fitting a MS6 without having to relocate or go to a thinner battery. There is just not much room there. I would love to be proved wrong though!

Recirc w/ stock coupler for me please. Thanks!

Sent from my iPhone using Forum Runner

Recirc/Stock Coupler for me as well. Nice work Jamie!

God damnit jamie

Just when I'm having problems with fuel trims related to the TIP-SRI connection

I'll take one - Stock turbo (2.5" coupler) with the recirc option

I actually have two intakes AND two TIPS (corksport and CP-e) that I'll have to sell now because I've been lazy.

Actually this sounds fairly awesome. And. . . If I upgrade the turbo down the road I don't have to worry about getting a different intake.

Looks top quality as usual, great work Jamie :)

Why do you have to release such blatant awesomeness when I am currently short on fundage?

I want this and now have to wait.

Thanks for the info Jamie.

Ill take a recirc with stock KO4 coupler

Thanks

ETA: I know you are just trying to get a figure with this list but is there anyway to put money down to hold one? If im on duty at the fire department and miss the announcement and you are sold out Ill be sad.........

This. Not fire fighter but in the army and visit the field from time to time.

Sent from my iPhone using Forum Runner

Ummmm... :pat: that is what this list is for. If your name is on the list you will get one of the first batch, just tell him what options you want.

[QUOTE="jbarone"]

...........

No money will be collected during the pre-order. This is just a list so we can get an idea of how many we need to accommodate the initial demand. Please provide your your options. I will update this post with those that wish to be on the list. When they do begin shipping orders will be placed direct from our website so you'll need to be quick or we could run out.

Sent from my iPhone using Forum Runner

@jbarone With recirc and both couplers please.

Put me down for a BT coupler with Recirc!

Thanks!

I agree completely. I've done a number of different intakes and inlet pipes over the years and they are all a very tight fit it you have a stock sized battery.

If you have a smaller battery, the tray would probably require some trimming.

This intake looks awesome though. A complete intake, one piece, no couplers except the one holding it to the turbo!? Thats all win JBR, nice work.

Thanks guys!!

Current Pre-Order List:
Black Metal - With Recirc & Stock Coupler
fooqr - With Recirc, Stock and 4" Coupler
dpolseno41 - With Recirc & Stock Coupler
BPASPEED - With Recirc, Stock and 4" Coupler
Ziggo - No Recirc & Stock Coupler
s1xstringmayhem - With Recirc & Stock Coupler
Mase - No Recirc & Stock Coupler
RobLoMS3 - With Recirc & Stock Coupler
neonracer27 - With Recirc & Stock Coupler
Ezekiel81923 - No Recirc, Stock and 4" Coupler
MS3Ghost -
Jdub0802 - With Recirc & Stock Coupler
InFeXIoN - With Recirc & 4" Coupler
czh5005 - With Recirc & Stock Coupler
Speed3eak - With Recirc & Stock Coupler
m249saw - With Recirc & Stock Coupler
Etipp98 - With Recirc & 4" Coupler

For those that are concerned that they may be on duty or in the field when these go on sale I will give you all plenty of notice for when they'll be available. If your schedule conflicts and you desperately need one of these I will work with a couple of you to make arrangements beforehand.

I assume most of you know that these are all hand made and take time so thank you for your patience and I will update you with our progress. We have to keep up on all our other products as well and the new products in the pipeline too. We'z bee'z bizzy!

Thanks,
Jamie

One-piece intake FTW! No more leaks at the couplers. Now I'll have to get an FMIC so my boost leak checker doesn't start feeling neglected.

Speaking of, when's that JBR FMIC project gonna be ready, Jamie? Looks like you've already got most of the pieces-parts, but you're just using them as background studio props in your pictures. No rush, I gotta let the bank account heal for a while. Just want to plan.

Sent from my DROID2 using Tapatalk 2

I would love to know how this sounds. I know that seems silly but I currently have the Cobb SRI and HTP TIP and I love how the metal TIP sounds. I know this is metal too but I really like the sound I get out of it but this is a really nice piece and I'll probably end up BT one of these days so...

You know Jamie, when you were at the OCC meet with the one unit, i sadi that we a few stockish Speed6s that we could do a quick test fit on. This whole issue of fitment on a MS6 could have been solved already. But I still love everything you make.

I'll make a new battery tray and get a thinner battery if need be.

@jbarone Just curious, but is it even possible to get something like this a C.A.R.B. certification?

I know it's expensive as hell to get any aftermarket part CARB certified, but for the guys in strict smog states, it could mean the difference between not getting sent to a smog ref and being flagged and fined.

Just like Rodrigo. His once fire spitting, demon of an MS3 is now an intake only grocery getter.

It'll be tempting to move the battery where the spare tire is. Ohhhhh the space in the engine bay then.