New JBR 3.5" Wide Path Full Intake In Stock!!

[Aaron_Speed3]

Originally Posted by Boost Addict Only reason its there is to clean up all of the wires, you can remove it to get more play for the battery terminal and then just zip tie the remaining wires to help keep it clean. Thats the route I'm going once this heat wave is over, to damn hot to be outside right now.

yeah cool ill do that. i like where the other guy happened to mount the ecu instead of on the fuse box. so ill definitely go that route!

[danieldolina70]

Originally Posted by BPASPEED I think hes talking a out this, please correct me if im wrong. Sent from my DROIDX using Tapatalk 2

thats what I cut off

[Aaron_Speed3]

hey since there is no OTS map for this new intake, i know we have to calibrate the MAF for the increased size of the pipe, thats no big deal, but what "Air intake" are you guys choosing from cobb to use as a base OTS? cause if you have DP, FMIC, CDFP, etc you would be "stage 2" according to cobb but obviously it all starts with choosing which intake you have...

i just wasnt sure which you guys are choosing as your starting point.

[danieldolina70]

Originally Posted by Aaron_Speed3 hey since there is no OTS map for this new intake, i know we have to calibrate the MAF for the increased size of the pipe, thats no big deal, but what "Air intake" are you guys choosing from cobb to use as a base OTS? cause if you have DP, FMIC, CDFP, etc you would be "stage 2" according to cobb but obviously it all starts with choosing which intake you have... i just wasnt sure which you guys are choosing as your starting point.

I have a custom "WOT TUNE" so Jon is sending me a base map to get started

[Aaron_Speed3]

Originally Posted by danieldolina70 I have a custom "WOT TUNE" so Jon is sending me a base map to get started

ah ok well i cant do that lol im going to be getting pro tuned but for now so i can drive the car and have a OTS map to run everything, i just wasnt sure what ppl chose to use from cobbs maps.

[Mistersix]

Since a complete maf cal is neccesary i would assume it wouldn't matter what intake the map is supposed to be for. They're all gonna be way off.

[Aaron_Speed3]

Originally Posted by Mistersix Since a complete maf cal is neccesary i would assume it wouldn't matter what intake the map is supposed to be for. They're all gonna be way off.

That's very true. I guess the Cobb intake would be closest in design so ill run off that and just recalibrate it.

[Boost Addict]

Why not just get an e-tune? Probably better than a protune, not alot of people know the platform as well as the tuners on here.


Sent from my iPhone using Tapatalk

[f-castrillo]

Originally Posted by Aaron_Speed3 hey since there is no OTS map for this new intake, i know we have to calibrate the MAF for the increased size of the pipe, thats no big deal, but what "Air intake" are you guys choosing from cobb to use as a base OTS? cause if you have DP, FMIC, CDFP, etc you would be "stage 2" according to cobb but obviously it all starts with choosing which intake you have... i just wasnt sure which you guys are choosing as your starting point.

There's no OTS map per se, but you can use COBB's "AccessTUNER Calibration & Tuning Guide Worksheet for MAZDASPEEDs" excel spreadsheet to come up with a multiplier that you can apply across your current MAF cal to get you to a decent starting point for another MAF cal.

Not sure what the stock MAF ID is for gen1 vs. gen2, but according to the OP, the WP intake has a 3.37" ID MAF, which translates to 85.6mm. You're probably going to apply at least a 1.20 multiplier across your MAF table, since it's so much larger than stock

[Onelovesoccer]

@Aaron_Speed3, get an etune dude. don't pay for a pro tune. the etuners on here are fantastic.

[Aaron_Speed3]

Originally Posted by Onelovesoccer @Aaron_Speed3, get an etune dude. don't pay for a pro tune. the etuners on here are fantastic.

I'm gonna guess etune is an email tune and I've delt with that before with my SRTs and didn't get too far. I've much rather it get dynoed by a pro so its all set right and good to go once.

[Onelovesoccer]

I'm telling you. Don't get a pro tune. The guys on this forum that do etunes will set you up amazingly. Who cares about the experience with SRTs, this forum has a number of good etuners. I doubt there is a single person on here that would tell you to get pro tune instead of etune. No exaggeration.

[Boost Addict]

Originally Posted by Onelovesoccer I'm telling you. Don't get a pro tune. The guys on this forum that do etunes will set you up amazingly. Who cares about the experience with SRTs, this forum has a number of good etuners. I doubt there is a single person on here that would tell you to get pro tune instead of etune. No exaggeration.

He speaks the truth, you'll spend less money on an e-tune, have better reliability, and best performance gains.

[Aaron_Speed3]

Originally Posted by Boost Addict He speaks the truth, you'll spend less money on an e-tune, have better reliability, and best performance gains.

Originally Posted by Onelovesoccer I'm telling you. Don't get a pro tune. The guys on this forum that do etunes will set you up amazingly. Who cares about the experience with SRTs, this forum has a number of good etuners. I doubt there is a single person on here that would tell you to get pro tune instead of etune. No exaggeration.

Who do I talk to?

[f-castrillo]

freektune (@atvfreek)
PERM tune (@Lex @Dano @djuosnteisn)
Hypnotic tune (@rfinkle2)
f-castrillo tune (shameless plug for myself lol)

there are several more, but I can't possibly remember them all

[Aaron_Speed3]

Originally Posted by f-castrillo freektune (@atvfreek) PERM tune (@Lex @Dano @djuosnteisn) Hypnotic tune (@rfinkle2) f-castrillo tune (shameless plug for myself lol) there are several more, but I can't possibly remember them all

Well that's just too many to choose lol I want whoever can get me the 330hp that my protuner said he can produce. I'll leave it at that.

[Boost Addict]

Your "protuner" is full of shit, it cant be done on stock turbo with just bolt ons.

[Onelovesoccer]

Originally Posted by Aaron_Speed3 Who do I talk to?

Perm tune, Stratified tune, Dizzy tune, RichTune, are some of the tunes you can get.

2010 MS3 - ECU Computer Tuning - Mazdaspeed Forums

Psh your pro tuner is talking out of his ass unless you do e85. You will not get 330 at the WHEELS without e85 or meth on the stock turbo. Don't believe it otherwise.

[Aaron_Speed3]

Well how the he'll am I suppose to choose between 5 different ppl? That doesn't seem quite fair. And I was always told.the proper way to tune a car is on a dyno, there's no safer way to adjust timing and such.

I'm not convinced to go against dyno tuning to email tuning.

[exentix]

Your datalogs will tell the etuner EVERYTHING they need to know about what your car is doing. Plenty of dyno proven threads about the gains you can get with an etune.

[Aaron_Speed3]

Ah gotcha. Well define some of these Tuners they all have different names so idk which one is better or what lol idk who to choose if they are even willing to tune for me lol

[danieldolina70]

Originally Posted by Aaron_Speed3 Well that's just too many to choose lol I want whoever can get me the 330hp that my protuner said he can produce. I'll leave it at that.

if you run e85 maybe,,,but tell him 330 whp or its free

[danieldolina70]

I'm happy with my WOT TUNE by "dantes5823"and he is local

[Aaron_Speed3]

Well if I can find out a little about each tuner I can make my choice and talk to them. But if they can all get me the same results then whats the difference? LOL

[Onelovesoccer]

@atvfreek, @Lex, @Bucker, @Dano, @RichieRichness to name a few. All of them can set you up with a good tune. PM me if you want, we're derailing this thread. Datalogs + virtual dyno is more than capable. The dAtalog is the most important part.

[RobLoMS3]

Has any one else gotten p2187 with this?

Sent from my PG86100 using Tapatalk 2

[shadesofgray19]

Originally Posted by Aaron_Speed3 Well if I can find out a little about each tuner I can make my choice and talk to them. But if they can all get me the same results then whats the difference? LOL

Whoever is available when you want. Some of the tuners are busy and may not be able to fit you into their schedule. Other than that they are all respected and will give you a better tune than your protuner can.

[f-castrillo]

Originally Posted by shadesofgray19 Whoever is available when you want. Some of the tuners are busy and may not be able to fit you into their schedule. Other than that they are all respected and will give you a better tune than your protuner can.

I wouldn't say etuners are "better" than protuners outright. But etunes are definitely a more cost effective options. Protunes are nice, but most people don't need dyno tuning for an non BT setup, nor have the $$$ needed for a protune. On pump gas 91/93, you can hit ~300whp, and with extra fueling you get a considerable bump in power

-- via Jellybean Galaxy Nexus

[Ziggo]

Originally Posted by RobLoMS3 Has any one else gotten p2187 with this? Sent from my PG86100 using Tapatalk 2

No, your MAFCAL is off.

I think there needs to be a sticker on the pipe that says "you must re-calibrate your MAF prior to use"

[breakfstincluded]

Originally Posted by f-castrillo freektune (@atvfreek) PERM tune (@Lex @Dano @djuosnteisn) Hypnotic tune (@rfinkle2) f-castrillo tune (shameless plug for myself lol) there are several more, but I can't possibly remember them all

how about cobb surgeline if you're in the NW (: ?

[Aaron_Speed3]

Originally Posted by f-castrillo I wouldn't say etuners are "better" than protuners outright. But etunes are definitely a more cost effective options. Protunes are nice, but most people don't need dyno tuning for an non BT setup, nor have the $$$ needed for a protune. On pump gas 91/93, you can hit ~300whp, and with extra fueling you get a considerable bump in power -- via Jellybean Galaxy Nexus

yeah im convinced to go etune. i really want to go over 300. even by a little like 305-310 ill be happy so i think ill just add 3gal of e85 to my gas everytime i fill up so i can get that extra boost in there =]

[rfinkle2]

Originally Posted by Aaron_Speed3 hey since there is no OTS map for this new intake, i know we have to calibrate the MAF for the increased size of the pipe, thats no big deal, but what "Air intake" are you guys choosing from cobb to use as a base OTS? cause if you have DP, FMIC, CDFP, etc you would be "stage 2" according to cobb but obviously it all starts with choosing which intake you have... i just wasn't sure which you guys are choosing as your starting point.

I would start by adding 50% to the entire maf curve (my apologies for the misinfo I edited out).

[Mase]

I was planning on installing tomorrow. I have no e-tune or maf cal work done. I am running a OTS Cobb Stage2+SF93 map (No TIP). Would it be safe for me to install an OTS Stage2+SF+TIH 93 map and apply a 1.66 multiplier for daily driving? My intent is to e-tune and maf call in the coming week(s) but to get the WP can I do this or am I asking for problems? Thanks ahead of time for your patience! I'm learning....very slowly...but learning

[Deldran]

I believe it was mentioned earlier in this thread but I will mention it again maybe @jbarone should stick this in the install instructions.

I think a couple of people tried multiplying there maf cal by 1.66. To do this go into ATR. Find the sensor folder of the current map you are running. Go to maf cal A table. Select all the values push M then type in 1.66 and click enter. Do the same on Maf cal b table.

This is not all that needs to be done you will need to do a proper maf calibration but this should get u close so your car will run right. Also I believe that 1.66 number is if you are coming from a stock size maf.

Some one please correct me if I am wrong but I believe this is what was stated earlier in the thread.

Sent from my Galaxy Nexus using Tapatalk 2

[Mase]

I did see that stated earlier in the thread. I just felt special and wanted to get people to weigh in on me individually

[Ziggo]

Originally Posted by Mase I was planning on installing tomorrow. I have no e-tune or maf cal work done. I am running a OTS Cobb Stage2+SF93 map (No TIP). Would it be safe for me to install an OTS Stage2+SF+TIH 93 map and apply a 1.66 multiplier for daily driving? My intent is to e-tune and maf call in the coming week(s) but to get the WP can I do this or am I asking for problems? Thanks ahead of time for your patience! I'm learning....very slowly...but learning

This will work. Only other concern is to watch for boost spikes.

[Mase]

Originally Posted by Ziggo This will work. Only other concern is to watch for boost spikes.

Thank you.

[exentix]

hell. yes.

got home from the kop meet today to find this waiting for me



might find time tomorrow to do it.

ok so if i load a stock intake map, multiply both a and b maf cal tables by 1.66, i should be close? might be pushing my luck, i want to set up my grimmspeed for 3 port at the same time. i heard halving the wastegate duty table is a good start there?

[dantes5823]

Originally Posted by exentix hell. yes. got home from the kop meet today to find this waiting for me might find time tomorrow to do it. ok so if i load a stock intake map, multiply both a and b maf cal tables by 1.66, i should be close? might be pushing my luck, i want to set up my grimmspeed for 3 port at the same time. i heard halving the wastegate duty table is a good start there?

Yea man sounds good. I might go a bit furthe on the wgdc. Better to be under then over.

[exentix]

what tables specifically for that? would you cut them all equally or smooth them across the board? sorry if thats a dumb question lol. this is the first ive messed with atr