New JBR MAZDASPEED 3/6 Short Ram and Cold Air Intake Systems in Stock!!

[JBR]

It’s with great pleasure that I bring to you the new JBR Power Path Short Ram Intake Systems. With over 8 months of intense research and development, JBR brings to you the absolute finest Short Ram and Cold Air Intake Systems available for your MAZDASPEED. What makes our modular designed intakes better than the rest? We’ve added wire reinforcement and additional layers of silicone and polyester for increased structural integrity and the superior ability to insulate the intake air from extreme engine temperatures. Our MAF housing is the lightest currently available anywhere which significantly reduces heat soak and sheds heat faster. These are just a couple of things that make the JBR Power Path Intakes Systems the very best the market has to offer.



And we didn’t just stop there…
JBR has partnered with Stratified Automotive Controls to bring you free Stage 1 and Stage 2 AccessPort off-the-shelf maps for your new JBR Intake System! These maps aren’t just some existing OTS maps with MAF calibrations applied to them; these maps are engineered using Stratified’s own proprietary logic. Stratified is a COBB licensed Pro Tuner, specializing in Vehicle Tuning, Engine Management, Turbo Charging, Boost Control and Direct Injection Technology.

Unlock the potential of your JBR Power Path Intake System with a free Stratified OTS map, and then unleash the full power of your MAZDSPEED with a Pro Tune by Stratified.



So if you’re in the market for an intake system, look no further. Quality, Price, Performance and Support, it’s what JBR is known for.

[jack_hammer]

I don't need any of this, but it's very cool to watch you grow, diversify, and expand your business.

[blackstar]

Very interesting. I might have to ditch my SURE/Cobb setup for this.

[Chief_Wiggum]

So long CP-e Nano and PG tip...

[Ranyard]

so long MS CAI and Sure TIP

[J.Dy]

Very nice @jbarone! What's the inner diameter of the MAF? Can you post a picture of how the straightener is attached to the MAF housing? Thanks.

[JBR]

The MAF is 68mm. The straighteners are a machined fit and pressed in.

[bebo12ms3]

just ordered stage2 in blue

[JBR]

Originally Posted by bebo12ms3 just ordered stage2 in blue

@bebo12ms3;

I just sent you an email.

[Trinity]

Very nice looking SRI & as a coincidence I'm currently looking to get a new SRI. Can you tell me if there's a mounting arm (like on the CPe SRI) that helps anchor the intake in place to the car?

[Dash08]

This is just awesome.

I'm so stoked you're partnering with Alex on this. It's really great that you guys are working in tandem and should generate a lot of business.

I mean hell, I'm ready to ditch my trusty Cobb just so I can get the mild Lex touch with the new JBR unit.

Good luck to both of you. This move is raising the bar for all the other manufacturers.

[Chief_Wiggum]

Originally Posted by Dash08 This is just awesome. I'm so stoked you're partnering with Alex on this. It's really great that you guys are working in tandem and should generate a lot of business. I mean hell, I'm ready to ditch my trusty Cobb just so I can get the mild Lex touch with the new JBR unit. Good luck to both of you. This move is raising the bar for all the other manufacturers.

Do it; my CP-e intake, PG TIP and hypertech are gone, replaced by Jamie's stage 2 intake and Alex's stage 1 93 octane map. Internals will go in soon, followed by reflash to the stage 2 stratified map, eventually ending with a stratified custom tune(s).

[cabrone]

Does this intake fit with the Cobb Turbo inlet hose? If so I'm ready to order my sri in all black! Time to ditch this fujita CAI

[fredricktsang]

excellent looking setup!

[evil MS3]

Looks great. Love the price as well

[JBR]

Originally Posted by cabrone Does this intake fit with the Cobb Turbo inlet hose? If so I'm ready to order my sri in all black! Time to ditch this fujita CAI

Yes it certainly does.

Thanks,
Jamie

Originally Posted by Trinity Very nice looking SRI & as a coincidence I'm currently looking to get a new SRI. Can you tell me if there's a mounting arm (like on the CPe SRI) that helps anchor the intake in place to the car?

There isn't and it's not needed. We lightened up the MAF housing so much, increased the number of layers of silicone and added wire re-enforcement to the intake hose that it's not going anywhere. The MAF and filter only weigh 1lb 9oz!

Thanks,
Jamie

[RLam]

Just got my RMM on and this is is making my money hot in my pocket. Good stuff. Seriously.

[Trinity]

Originally Posted by jbarone There isn't and it's not needed. We lightened up the MAF housing so much, increased the number of layers of silicone and added wire re-enforcement to the intake hose that it's not going anywhere. The MAF and filter only weigh 1lb 9oz! Thanks, Jamie

Brilliant, thanks for answering the question.

[JBR]

Originally Posted by RLam Just got my RMM on and this is is making my money hot in my pocket. Good stuff. Seriously.

Hot in my pocket...You're turning me on. lol

[Oni]

@jbarone

Got my Stage 2 Intake in the mail today and was a bit pissed at either your shipping company or USPS. The tape was completely cut on one side of the box, on top of the box, and on one flap on the other side. So all that was holding the box closed was 1 flap on 1 side (you could still get into the box) and it was on my porch this way.

Thankfully, all parts appear to be there after checking everything and it all looks great (no packaging in the main box was disturbed). I can't wait to install it whenever I get around to ordering my internals.

[JBR]

My Apologies. If there's a problem with anything I will take care of it ASAP!

We do great job packaging our products and we take pride in it. I can't understand why delivery people can't take some pride in what they do. Lazy worthless POS's. /rant

-Jamie

[Oni]

Originally Posted by jbarone My Apologies. If there's a problem with anything I will take care of it ASAP! We do great job packaging our products and we take pride in it. I can't understand why delivery people can't take some pride in what they do. Lazy worthless POS's. /rant -Jamie

I agree. All of your packaging was intact. In fact, it was almost irritating how much I had to unwrap to find my parts to make sure it was all there! All parts are there and nothing is damaged (even the stickers). Just strange box was opened to peak in. I'll post pics up in 2 weeks or so when I get time to install.

[bebo12ms3]

installed today stage II and love it sound is beast and great service jbr

[RLam]

Just ordered last night! Will get pics once installed.

[Chief_Wiggum]

Originally Posted by bebo12ms3 installed today stage II and love it sound is beast and great service jbr

now get an AP (if you don't have one already) and load the Stratified OTS map...you won't be sorry!

[JBR]

The free OTS maps included with these intake kits are awesome.

[taf0422]

Nicely done Jamie!

I am always proud to say that I have JBR parts on my car. Keep up the good work

[JBR]

Thanks man!!

[Oni]

Originally Posted by jbarone Thanks man!!

The directions on your website for install show you slide the new silicone hose on the BCS nipple without re-installing the clamp from the original hose. Is this intentional or an omission?

[JBR]

Intentional, there is no need for the clamp.

[Elpollo19]

Originally Posted by bebo12ms3 installed today stage II and love it sound is beast and great service jbr

Hey man I got my speed 3 about a month ago and can't seem to decide between corksport sri/tip or the JBR sri/tip. I see you got JBR, and what's your opinion on it? Also how loud is it? Thanks

[JBR]

The quality of ours is as good if not better. Our price also includes shipping and OTS maps are free by the best tuning company in the business should you ever decide to get an AP. Let me know if you have any other questions.

Thanks,
Jennifer

[exentix]

^ Jennifer? What have you done with my Jamie?

[JBR]

He's here. We're growing so fast that he needs to spend a little more time in the shop. So, since I'm in the office all day I'm gonna pitch in when needed.

-jennifer

[exentix]

Originally Posted by jbarone He's here. We're growing so fast that he needs to spend a little more time in the shop. So, since I'm in the office all day I'm gonna pitch in when needed. -jennifer

awesome. tell him to get ahold of me if theres anything i can help with

[JBR]

We've had a lot of orders for these this week, Thanks!!. I'm really looking forward to your feedback.

Thanks,
Jamie

[JBR]

James Barone Racing Stage 3 Power Path Intake System - YouTube

James Barone Racing Stage 3 Power Path Intake System - YouTube

[Funkster777]

Ordered. I look forward to it and a new map.

[Tronix]

If I dont have a AP yet, is it worth for my to get the Stage 2 or should i just stick with stage 1 for now? I dont know the timing of when I will get the AP so thats why I ask. Thanks.

[JBR]

Originally Posted by Tronix If I don't have a AP yet, is it worth for my to get the Stage 2 or should i just stick with stage 1 for now? I don't know the timing of when I will get the AP so that's why I ask. Thanks.

The Stage 2 will yield you just a smidge more power now and much better flow for when you do get an AP and can really take advantage of it. The Stage 2 is also MUCH cheaper than buying the TIP later. Hope this helps.

Thanks,
Jamie