New Product RE-RELEASE!! JB ARMOR Mud Flaps In Stock
 

The story...
3 years ago JBR released mud flaps for the MAZDASPEED 3 constructed out of textured ABS plastic. Our thought was that they would be more durable than the urethane flaps being offered at the time and for a while they were. Then winter came and the ABS got much less flexible, became somewhat brittle in extreme climates and as a result we've had several break over the past 3 years. Our customers were taken care of course and the broken flaps were replaced under our lifetime warranty. So we decided to redesign our mud flaps flaps and now...we've perfected them!!


Details:
JB ARMOR Mud Flaps are the highest quality flaps available at a price that's now easier than ever to afford. Made from thick, 1/8” 80a durometer urethane, the same exact material used by the more expensive companies. Tough protection from rocks, road tar and mud that will withstand any form of abuse, on or off the road. The JBR brand logo has been laser etched in to the surface of each flap, guaranteed never to fade like those that are painted on or fall of off like decals.

http://www.jamesbaroneracing.com/sho.../JBARMORMF.JPG

Applications:
2004 - 2013 MAZDA 3
2007 - 2013 MAZDASPEED 3

The JB ARMOR Mud Flap Kit Includes:

• 2 Front Mud Flaps
• 2 Rear Mud Flaps
• Stainless Mounting Hardware
• Color Installation instructions are available in our support section
• Shipping is free in the US & our Hassle Free Lifetime Warranty is included

http://www.jamesbaroneracing.com/sho...ARMORMF_01.JPG

http://www.jamesbaroneracing.com/sho...ARMORMF_02.JPG

http://www.jamesbaroneracing.com/sho...ARMORMF_03.JPG

http://www.jamesbaroneracing.com/sho...ARMORMF_04.JPG

http://www.jamesbaroneracing.com/sho...ARMORMF_05.JPG

You guys using a fiber laser for that? Or CO2? Looking sharp!

These look great Jamie! Any pictures of the whole car with these installed?

+1. Looks good so far...

Damn! If I didn't already have Rally Armor flaps I would love these.

We just brought laser etching in house, it's a co2 gas laser etcher/cutter. Bad mother too. I'll post a vid of them being etched later.

Sorry no side pics. I'll snap one later and post it.

Is there any actual benefit of putting mud flaps on (the back of) a FWD... kinda seems like rice unless I'm missing something?

Good thing I waited!

Kickass! The reason I ask is we just got a fiber laser in at work and I haven't been able to get nearly that decent of a finish out of it on plastics.

Do your back wheels not rotate?

All tires pick up dirt, rocks, mud, tar ect. and throw it up on the car, causing paint chips and a big mess too regardless of what wheel drive.

I had a few blem flaps that didn't make it through our QA and we used those for testing. It took a lot of tweaking to get it perfect. Melted a bunch of urethane and that shit stinks.

I am interested in more pics as well, I need flaps, got shitty Mazda paint. I swear I get more nicks from data logging then when I am daily driving. Thank you in advance for the pictures.

Sent while cleaning my spill valve again...

Available logo-less? My Rokblokz are starting to get chewed up on the bottom edge and have a silly name.

Trust me I know. Ask me where our lasers urethane lens cover is lol.


Sent from my iPhone using Tapatalk

You need these flaps!

This is how it looks with and without flaps. I have CS flaps
JBR need to make flaps for ms6 too ;)

Without:
http://www.mazdapower.se/images/pics...-20-1030_s.jpg

With:
http://www.mazdapower.se/images/pics...-20-1029_s.jpg

Just got through ordering me a set! Can't wait to install em! Very nice mud flaps @jbarone; :fing02:

@jbarone; Any chance we can get some with red lettering? :smile:

Here's the video.

Will these ever be made for the 6? I'd definitely be purchasing a set if so.


Sent from my iPhone using Tapatalk

I should groan you...lol

NO!

I've been giving it some thought.

Think hard! Haha, the sides of my 6 hate me right now.


Sent from my iPhone using Tapatalk

you would have if i asked the same question! do it, no balls.

i havent driven a winter without mine but i can say i never get snow piled up near my tires like most cars that dont have flaps.

just my observation

I'll second the motion that I'd like to see a set for the MS6.

I'd also be interested in them being logoless......because my car isn't boring enough.

Yes they are. Mention "without engraving" in the comments section during check out and we'll send a set with no logo's.

We raised the lettering up for that very purpose. So it would not get chewed off.

-Jamie

how dare you JB. neglecting your ms6 brotheren on all these new products

These look great @jbarone;. I am glad you decided to go with the Name and logo in these this time around!! Speaking of logos, I need a big ass white JBR vynil to put somewhere lol.
Ohhhhh aahhh and engraving now! Me likey!

any discounts for those of us that ordered the first batch that failed? I do love all the other products tho!

I'm in for a set for the MS6.

I wouldn't say the first batch failed, we had a few break. If you have a warranty issue email us and we'll get you taken care of.

-Jamie

damn those are sweet. is the hardware better then the rally armors? seems like i always have to tighten the front ones weekly.

Just picked up a set. Thanks @jbarone, Keep churning out the good stuff!

We use stainless 1/4-20 phil pan machine screws and good 1/4-20 metal edge clips for machine screws to fasten too. Not sure what RA provides but, I've never had any come loose. When I swapped out the old ABS flaps for a set of new the new ones the hardware was clean and easy to remove after 3 years of being on the car so I would say the hardware is really good.

Just ordered mine! Can't wait till they get here :)


Sent from my iPhone using Tapatalk

Race uses plastic clips :( with stainless hardware.

@jbarone;
Any chance you make some for the 6?

Ordered mine!
Thanks

Are these more of a "shiny/glossy black"? I was hoping for something more "flat black".

Based on the pictures provided, I'm gonna say glossy.

Aaaaand not for the MS6:(

Do the back ones require drilling to install?

sent from my phone because it's 2014

as long as the hardware for these is the same as the abs plastic ones, YES. having run both RA and JBR, jamies hardware is miles better. set it, and forget it.

Yes for both Gen's.

ok thanks. if you get any shots of the whole car with them on i'd like to see that, i'm definitely leaning toward these!

Here's a couple side shots.

+1 One of the few reasons I have a set of your flaps, I hate logos. Looks great! I cant wait to break mine lol

I've had mine for over a year and they've been running strong. I've definitely scraped them on bumps and curbs more than a few times, but haven't chipped anything off yet. If I do, I'll definitely upgrade to the new JBR ones! The mounting hardware is legit.

I want to buy these, because I love Jamie, but I think they're useless here in FL lol.

My set got in and look great!

They're not only useful when it snows! Gravel, rain, etc. Worth it.

sent from my phone because it's 2014

Alright then, I'll think about it. Lol.

Another product on my list :why:

Installed

I suck at uploading pics

Awesome Pictures!

ready
 

yuuup im ready to order these bad boys!

And Order Placed

i would love a set for the 6.

that being said i have custom mounted f 150 flaps on to a raptor and done lots of other custom flaps before so i could probably try custom mounting these. would the pre made slots be that much different then a set for a 6?

Not even close.

Yeah I thought so. But still the flaps look great. Hope us 6s can get some soon.


Powered by the flux capacitor

We will be working on flaps for the 6 this week.

Jackpot!


Sent from my iPhone using Tapatalk

legit. so much snow/gravel/salt/sludge builds up in my wheel wells over the winter

All I can say is thank you for a wonderful product and for the flat rate envelopes lol :-D



http://img.tapatalk.com/d/14/03/18/usehuru4.jpg

Sent from my HTC One using Tapatalk

Put me down for a set! :headbang:

I can't wait to order a set of flaps for the 6!

will be ordering a set next month!

those are nice, after looking at the pictures im getting the jbr of the rally armor ones!

I was never expecting these to do so well. I'm thrilled you guys like them so much. We are already well in to making our second batch so we don't run out.

Thanks!!

how are those 6's coming along? :biggrin:

I'm really diggin' these. Are they about the same size as the rally armors or the other jbr flaps?

Did I miss a price? Lol

Tapa Tapa Tapa

It's on the site. $109 I believe

$105 shipped!

Okay time to sell my rally armors and upgrade lol

Tapa Tapa Tapa

If my wife didn't just buy me some rokbloxz mudflaps i'd be all over these. I LOVE the gloss finish they have.

Sent from my EVO using Tapatalk

I love everything about these lol big step up from the last batch they were selling. Must.... Buy....

Tapa Tapa Tapa

Just ordered these with the License Plate bracket.... :) hopefully Jamie will love me more JBR stickerzzz!!.. :icon16: patiently waiting.. :dance:

Just ordered :D

Thanks for the orders!

MS6 Flaps are going out for production. Should have them ready for sale by late April!

I LOVE U

Sent from my Nexus 5 using Tapatalk 2

thank you for supporting the 6

From what I've seen these are almost exactly the same size as the RA's.

Can't wait to buy some for the 6

Awesome, thanks! I'm going to be ordering these as soon as i get some money! haha

Money....... Money is good.

Tapa Tapa Tapa

It's very good, but hard to come by haha

That flaps for the MS6 turned out really nice. I made them so there's some adjustment; they can be moved in our out about 5/8" or so.

The material for them should be ready on the 10th and hopefully we can get them cut within a few weeks after that.

Got mine in the mail today and got them installed. Looks fantastic, we'll see how well they do when it rains tomorrow!

How easy is dat install? Screw it I'm gonna have to pick some up they're too beautiful lol

Tapa Tapa Tapa

Not bad. The first front one took me a little longer because I was having trouble moving the liner out of the way, but with a bit more force it popped out without an issue. The rest of them was easy after that.

Jaime,

Might I be able to order just the hardware you use for your flaps? I love buying your products, but I can't justify buying new flaps when I have RA flaps already. But this winter was really hard on the hardware provided by RA, and I've heard your hardware was much better. Just curious if you would be willing to do that. Figured I'd post it here for the benefit of others.

Double tap on this, bump for the same question ^

Tapa Tapa Tapa

Jamie, thanks for the Mud Flaps! What a great product and V2 is the, you know what! The new materials, fit and finsh is exceptional and I appreciate you adding the "special touch" to them......we appreciate the MOCO logo to them.......Thanks again for continually exceeding expectations!

Nice, I'm gonna have to order these soon...

SPEED 6 flaps are done Photos, website, instructions then the release. Should be towards the end of the week.

Awesome, will be buying

Finally ordered a set. Still not sure if I like the look of mud flaps on the spid3, but tired of the rock chips and crud in the wheel wells.

I smell a group buy.......


*waits hopefully"*

Tapa Tapa Tapa

Trust me you will like it

Sent from my HTC One using Tapatalk

But in all seriousness, @jbarone; how do you guys feel about custom etching? Can that be arranged?

Tapa Tapa Tapa