Mazdaspeed Forums
Page 2 of 3 1 2 3
Show 100 post(s) from this thread on one page

Mazdaspeed Forums (http://www.mazdaspeedforums.org/forum/)
-   JAMES BARONE RACING (http://www.mazdaspeedforums.org/forum/f493/)
-   -   New Product RE-RELEASE!! JB ARMOR Mud Flaps In Stock (http://www.mazdaspeedforums.org/forum/f493/new-product-re-release-jb-armor-mud-166012/)

exentix 03-10-2014 08:20 AM
Quote:
Originally Posted by Blkpearl (Post 2486242)
damn those are sweet. is the hardware better then the rally armors? seems like i always have to tighten the front ones weekly.
as long as the hardware for these is the same as the abs plastic ones, YES. having run both RA and JBR, jamies hardware is miles better. set it, and forget it.

JBR 03-10-2014 06:35 PM
Quote:
Originally Posted by grazamataz (Post 2488482)
Do the back ones require drilling to install?

sent from my phone because it's 2014
Yes for both Gen's.

grazamataz 03-10-2014 07:14 PM
ok thanks. if you get any shots of the whole car with them on i'd like to see that, i'm definitely leaning toward these!

JBR 03-10-2014 08:35 PM
2 Attachment(s)
Here's a couple side shots.

darkstar5440 03-10-2014 09:43 PM
Quote:
Originally Posted by jbarone (Post 2485994)
Yes they are. Mention "without engraving" in the comments section during check out and we'll send a set with no logo's.

We raised the lettering up for that very purpose. So it would not get chewed off.

-Jamie
+1 One of the few reasons I have a set of your flaps, I hate logos. Looks great! I cant wait to break mine lol

kolosok17 03-12-2014 10:09 AM
Quote:
Originally Posted by jeffdevo (Post 2486132)
any discounts for those of us that ordered the first batch that failed? I do love all the other products tho!
I've had mine for over a year and they've been running strong. I've definitely scraped them on bumps and curbs more than a few times, but haven't chipped anything off yet. If I do, I'll definitely upgrade to the new JBR ones! The mounting hardware is legit.

Kyle Undefined 03-12-2014 10:48 AM
I want to buy these, because I love Jamie, but I think they're useless here in FL lol.

Lalangalang 03-12-2014 11:03 AM
2 Attachment(s)
My set got in and look great!

grazamataz 03-12-2014 12:40 PM
Quote:
Originally Posted by Kyle Undefined (Post 2492130)
I want to buy these, because I love Jamie, but I think they're useless here in FL lol.
They're not only useful when it snows! Gravel, rain, etc. Worth it.

sent from my phone because it's 2014

Kyle Undefined 03-12-2014 12:52 PM
Quote:
Originally Posted by grazamataz (Post 2492372)
They're not only useful when it snows! Gravel, rain, etc. Worth it.

sent from my phone because it's 2014
Alright then, I'll think about it. Lol.

tikous360 03-12-2014 01:05 PM
Quote:
Originally Posted by jbarone (Post 2485796)
We just brought laser etching in house, it's a co2 gas laser etcher/cutter. Bad mother too. I'll post a vid of them being etched later.

Sorry no side pics. I'll snap one later and post it.
Another product on my list :why:

Misterb 03-12-2014 08:15 PM
1 Attachment(s)
Installed

Misterb 03-12-2014 08:17 PM
1 Attachment(s)
I suck at uploading pics

JBR 03-12-2014 08:31 PM
Awesome Pictures!

damimgoood 03-12-2014 09:19 PM
ready
 
yuuup im ready to order these bad boys!

Polish Man 03-13-2014 11:31 PM
And Order Placed

modit 03-13-2014 11:44 PM
i would love a set for the 6.

that being said i have custom mounted f 150 flaps on to a raptor and done lots of other custom flaps before so i could probably try custom mounting these. would the pre made slots be that much different then a set for a 6?

JBR 03-13-2014 11:46 PM
Quote:
Originally Posted by modit (Post 2495114)
would the pre made slots be that much different then a set for a 6?
Not even close.

modit 03-13-2014 11:49 PM
Quote:
Originally Posted by jbarone (Post 2495117)
Not even close.
Yeah I thought so. But still the flaps look great. Hope us 6s can get some soon.


Powered by the flux capacitor

JBR 03-15-2014 05:26 PM
Quote:
Originally Posted by modit (Post 2495120)
Yeah I thought so. But still the flaps look great. Hope us 6s can get some soon.


Powered by the flux capacitor
We will be working on flaps for the 6 this week.

Mcklveen02 03-15-2014 05:45 PM
Jackpot!


Sent from my iPhone using Tapatalk

Boostin'likeAboss 03-17-2014 09:01 PM
legit. so much snow/gravel/salt/sludge builds up in my wheel wells over the winter

Polish Man 03-17-2014 10:34 PM
All I can say is thank you for a wonderful product and for the flat rate envelopes lol :-D



http://img.tapatalk.com/d/14/03/18/usehuru4.jpg

Sent from my HTC One using Tapatalk

ABolewski 03-17-2014 11:44 PM
Quote:
Originally Posted by jbarone (Post 2497430)
We will be working on flaps for the 6 this week.
Put me down for a set! :headbang:

Status Update 03-18-2014 12:32 AM
I can't wait to order a set of flaps for the 6!

tytanium 03-18-2014 10:36 AM
will be ordering a set next month!

tourbo24 03-22-2014 10:12 AM
those are nice, after looking at the pictures im getting the jbr of the rally armor ones!

JBR 03-22-2014 06:39 PM
I was never expecting these to do so well. I'm thrilled you guys like them so much. We are already well in to making our second batch so we don't run out.

Thanks!!

Boostin'likeAboss 03-22-2014 06:42 PM
how are those 6's coming along? :biggrin:

Idisagree 03-22-2014 08:00 PM
I'm really diggin' these. Are they about the same size as the rally armors or the other jbr flaps?

Jap11g 03-22-2014 09:05 PM
Did I miss a price? Lol

Tapa Tapa Tapa

Idisagree 03-23-2014 02:57 PM
Quote:
Originally Posted by Jap11g (Post 2508008)
Did I miss a price? Lol

Tapa Tapa Tapa
It's on the site. $109 I believe

JBR 03-23-2014 03:10 PM
$105 shipped!

Jap11g 03-23-2014 03:21 PM
Okay time to sell my rally armors and upgrade lol

Tapa Tapa Tapa

turbo test 03-24-2014 07:03 AM
If my wife didn't just buy me some rokbloxz mudflaps i'd be all over these. I LOVE the gloss finish they have.

Sent from my EVO using Tapatalk

Jap11g 03-24-2014 07:12 AM
I love everything about these lol big step up from the last batch they were selling. Must.... Buy....

Tapa Tapa Tapa

Trey-Z 03-25-2014 02:44 PM
Just ordered these with the License Plate bracket.... :) hopefully Jamie will love me more JBR stickerzzz!!.. :icon16: patiently waiting.. :dance:

fredricktsang 03-25-2014 07:32 PM
Just ordered :D

JBR 03-26-2014 02:31 PM
Thanks for the orders!

MS6 Flaps are going out for production. Should have them ready for sale by late April!

Status Update 03-26-2014 02:34 PM
Quote:
Originally Posted by jbarone (Post 2513441)
Thanks for the orders!

MS6 Flaps are going out for production. Should have them ready for sale by late April!
I LOVE U

Sent from my Nexus 5 using Tapatalk 2


All times are GMT -7. The time now is 12:52 AM.
Page 2 of 3 1 2 3
Show 100 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
SEO by vBSEO ©2011, Crawlability, Inc.
vB.Sponsors

©Copyright 2008 ; 2019 Cymru Internet Services LLC | FYHN™ Autosports HQ
Ad Management plugin by RedTyger

Page generated in 0.20126 seconds with 11 queries