450 HP/473 TQ on a Ko3 swap

[kritz]

Doods, Screw that BT swapped a Ko3 in the NuPu and got it on the dyno! used a decaying exponential double reverse taper hybrid boost vacuum tuning strategy. Went with a 30mm triple catted exhaust! Dyno was a Mustang and as the title says 450/473 at 2137 RPM. Got rid of the AP and went Standback and also put 10 G-chips in series. Lined up against a GTR and smoked him from a dig!

[Don06speed6]

First

[BobtailedSnail]

I have been missing out on all of the awesome fun!!!! Get me in on this???

[amggilly305]

seems legit

[kritz]

Dump that Ko4 bro! Rip a Ko3 from a Vduhb or an A4 and use some JB weld and duct tape to install. I piped the BOV into the coolant reservoir and the shit sounds insane! Oh sihit almost forgot go 4 steps warmer with the spark plugs and tape over the TMIC with duct tape or newspaper!

[SarcasticOne]

is it bad that the one thing annoys me about this thread is that it's actually mathematically impossible to have made 473whp @ 2137rpm and peak torque only be 450ftlb...
(such a physics and maths geek...)

[kritz]

Originally Posted by SarcasticOne is it bad that the one thing annoys me about this thread is that it's actually mathematically impossible to have made 473whp @ 2137rpm and peak torque only be 450ftlb...

Oh Shit, I didn't factor in the 245/35 15's into the Reverse Polish Kentuckian notation derivative that would put the TQ at 625.51 newton/meters per Avogadro's number!

[09Speed3Z]

Because GenPu.....

[Swinger13]

Originally Posted by SarcasticOne is it bad that the one thing annoys me about this thread is that it's actually mathematically impossible to have made 473whp @ 2137rpm and peak torque only be 450ftlb... (such a physics and maths geek...)

I'm lost as well...troll???

[jfspeed6]

So this is your secret to so much power!!! Thanks for sharing!!

[atvfreek]

Damn brah, who was the masterful tuner behind this masterpiece

Sent from freeks kitchen

[silentwolf8]

[Clannad]

Originally Posted by atvfreek Damn brah, who was the masterful tuner behind this masterpiece Sent from freeks kitchen

Must have been a Brent Tune.

[Easter Bunny]

What the fuck have you been smoking lately? Your threads are becoming as pointless as @predapio;'s

[aaronc7]

Nice! Just think how much more power you can make once you add in the PTP MAF screen.

[kritz]

I am fabricating up a DBS (double balance shaft) it's da bomb! My CAD/CAM shows that this will net another 44.7 hp and 34.9 ft/p/newtons!

[triphop631]

I think working nights is getting to you @kritz;

[8.5MS3]

old man is old

[Geo13]

FUCKING AWESOME!!! Would you consider sponsoring my car?? My current sponsor can be a real bitch sometimes!!! I'll just leave it with you while the work is being done.

I need 11 G-Chips though....

[kritz]

Originally Posted by Geo13 FUCKING AWESOME!!! Would you consider sponsoring my car?? My current sponsor can be a real bitch sometimes!!! I'll just leave it with you while the work is being done. I need 11 G-Chips though....

Sure< lol, just bring me a tray of the cupcakes in your avatar!

[Geo13]

Done!

[CWP_MS3]

se·nile /ˈsēˌnīl/ Adjective (of a person) Having or showing the weaknesses or diseases of old age, esp. a loss of mental faculties. Synonyms decrepit - old

Yup.

[kritz]

Dude @CWP_MS3; working with TpT and Brentune.

[lilred]

That was quick you just got the car, its been like what 2 weeks?

tapafuck

[CWP_MS3]

Originally Posted by kritz Dude CWP_MS3; working with TpT and Brentune.

bR3nt00n?! Well fuck me! Say no moar!

[Domino81]

Troll.

[ms3rick]

haha, i love troll posts that make me laugh. This would fit perfectly in a SI/GTI forum LOLZ

[moomooz12]

We should all redirect some noobs to this thread.

[Ray Danger 2020]

Lol...this is funny shit

[silvapain]

JUST THINK OF THE SPOOL MAN, THE SPOOL!


Tapadatass

[kritz]

Originally Posted by silvapain JUST THINK OF THE SPOOL MAN, THE SPOOL! Tapadatass

Dan, I'm a plumber. The stool is what I just read. lol

[silvapain]

Originally Posted by kritz Dan, I'm a plumber. The stool is what I just read. lol

As a former plumber myself, I feel it's my obligation to remind you the proper technical term is "water closet" or W/C.


Tapadatass

[kritz]

Originally Posted by silvapain As a former plumber myself, I feel it's my obligation to remind you the proper technical term is "water closet" or W/C. Tapadatass

Wrong definition Dan>>>Healthy and Unhealthy Stool

This thread is going to shit! Also installing double intake turbines.


http://www.ebay.com/itm/GM-Eagle-Per...931114&vxp=mtr

[BlueStreak]

[p057]

noobs are noobs. they make themselves evident in this thread.
@kritz; have you considered removing the intake tract and routing the downpipe to the intake runners to use four-port exhaust gas recirculation? This will help the environment by just re-burning exhaust.

[kritz]

Originally Posted by p057 noobs are noobs. they make themselves evident in this thread. @kritz; have you considered removing the intake tract and routing the downpipe to the intake runners to use four-port exhaust gas recirculation? This will help the environment by just re-burning exhaust.

Sir, perpetual energy! I may need a cold fusion fuel cell then it will work!

[stuntz89]

I put that electric supercharger in and got the extra 30whp they said i would

[SofaKingAwesome]

Somebody please clean this up so we can have more lulz

Sent from my EVO using Tapatalk 2

[predapio]

Originally Posted by Easter Bunny What the fuck have you been smoking lately? Your threads are becoming as pointless as @predapio;'s

While they may be pointless and useless to you, they serve my purpose.

Making me laugh, that's the only important thing. Don't have looks, money, or constant erections anymore, I NEED something to look forward to.

[Familyguy427]

So you're saying a ko3, 11 g chips, electonic Supercharger and cupcakes... FUck yeah I'm down. Can't wait to change my sig!

I think I'll even throw 100 spoke Daytons on too with a whistle tip in my exhaust!