Got rid of my speeed! upgraded finally

[I<3Groceries]

Originally Posted by ahfunaki Probably because they have to pay their mortgage and such... And the 100k that the car cost is probably a down payment on the house he wants to buy...

Ah. Responsibirities.



Sent from my Galaxy Nexus using Tapatalk 2

[xtasy]

He have money for gtr, but no money to donate

[Skup1993]

Originally Posted by Stealth01 Now that's a more convincing picture. Same garage, different angle. But I still don't believe it without a sign. $25K to $90K is a huge jump unless you won the Powerball.

lol if i had one the powerball trust me i would have an aventador

Originally Posted by I<3Groceries Yeah yeah. Fact of the matter is, a 19 year old doesn't either. Doesn't know much of anything. Hope you have a contingency stash. Sent from my Galaxy Nexus using Tapatalk 2

Apparently i know alot since i own a GTR an own a successful fuel/auto transport company

Originally Posted by xtasy He have money for gtr, but no money to donate

i know but im on this forum only post once a year

[SpeedSixxx]

Originally Posted by Skup1993 been saving up since i bought my speed in jan of 2010 lol

lying shit fuck...

you are the SAME faggot who posted a BS thread about your NEW BUILT 2213847478347 in parts speed 3.. I called you out on all the BS you posted and you havnt been back since..

now you're back with some BS story about the nissan GTR your DADDY got you?

your doctor daddy..

lemmy find that thread...

My 2010 Mazdaspeed3 18x9 +30

read that thread guys...

I pointed out all the BS...

look at his list of parts... try and think what doesnt look right on the list and what may be missing in a build like that...

this kid is a FAGGOT and should keep his stories and BS to himself..

NO ONE GIVES A FUCK THAT YOUR DADDY IS A RICH DOCTOR.... you own a biz...LOL ok...

EDIT:from his thread...

I've seen him and his car at Towers a few times, according to his Facebook he has:
"Garret GT3076R with Ported and Polished Compressor housing
2.4L Short block
Port and Polished Head
Tri-Metal Rod Bearing
Performance Main Bearing
Pauter forged rods
CP forged pistons (8.5:1 compression ratio)
Cometic head gasket
ARP head studs
ARP main bolts
Spec Stage 3+ clutch
Balance shaft delete
Oil pan baffle
New block
cp-e Performance Spec Multi-layer Head Gasket
Tial 38mm external wastegate (dumped to atmosphere)
PG manifold with custom external WG fabrication
ATP turbo inlet
Streetunit Crankshaft
Fidanza ligth weight flywheel
Mazda3Mods Enging Torque Damper ETD
Streetunit motor mounts (upper, tranny, rear)
NGK step colder spark plugs
HKS Twin Power Ignition System
MZR 2.3 DISI SAFEseal Injector Seals
Cp-e ProFuel Controller
ERL Engineered Ductile Iron Sleeves
Catch Cans
Nitrous 75 shot DRY"
=======================================

mr abdullah has 2 head gaskets?

he has new block on a brand new car?

he has a SU crankshaft ..... I thought he got a NEW BLOCK? don't that cum with a crank? so why would you buy a FACTORY crank from SU.. cause he didnt read on SU's list that their crank is FACTORY.... he thought it was better crank that maybe SU made?... lol.

this faggot obviously went on a bunch of web sites and copied parts and pasted....

does this faggot have a gtr? maybe but i doubt it... do I or anyone else REALLY give a FUCK you are a fat little rich fuck stick>? no! so STFU and delete your account

[Darksun280]

meh

[Kellerspeed3]

Originally Posted by SpeedSixxx lying shit fuck... you are the SAME faggot who posted a BS thread about your NEW BUILT 2213847478347 in parts speed 3.. I called you out on all the BS you posted and you havnt been back since.. now you're back with some BS story about the nissan GTR your DADDY got you? your doctor daddy.. lemmy find that thread... My 2010 Mazdaspeed3 18x9 +30 read that thread guys... I pointed out all the BS... look at his list of parts... try and think what doesnt look right on the list and what may be missing in a build like that... this kid is a FAGGOT and should keep his stories and BS to himself.. NO ONE GIVES A FUCK THAT YOUR DADDY IS A RICH DOCTOR.... you own a biz...LOL ok... EDIT:from his thread... I've seen him and his car at Towers a few times, according to his Facebook he has: "Garret GT3076R with Ported and Polished Compressor housing 2.4L Short block Port and Polished Head Tri-Metal Rod Bearing Performance Main Bearing Pauter forged rods CP forged pistons (8.5:1 compression ratio) Cometic head gasket ARP head studs ARP main bolts Spec Stage 3+ clutch Balance shaft delete Oil pan baffle New block cp-e Performance Spec Multi-layer Head Gasket Tial 38mm external wastegate (dumped to atmosphere) PG manifold with custom external WG fabrication ATP turbo inlet Streetunit Crankshaft Fidanza ligth weight flywheel Mazda3Mods Enging Torque Damper ETD Streetunit motor mounts (upper, tranny, rear) NGK step colder spark plugs HKS Twin Power Ignition System MZR 2.3 DISI SAFEseal Injector Seals Cp-e ProFuel Controller ERL Engineered Ductile Iron Sleeves Catch Cans Nitrous 75 shot DRY" ======================================= mr abdullah has 2 head gaskets? he has new block on a brand new car? he has a SU crankshaft ..... I thought he got a NEW BLOCK? don't that cum with a crank? so why would you buy a FACTORY crank from SU.. cause he didnt read on SU's list that their crank is FACTORY.... he thought it was better crank that maybe SU made?... lol. this faggot obviously went on a bunch of web sites and copied parts and pasted.... does this faggot have a gtr? maybe but i doubt it... do I or anyone else REALLY give a FUCK you are a fat little rich fuck stick>? no! so STFU and delete your account

Shut his mouth! Well now he has nothing to say hmmmm....fun while it lasted.

[SpeedSixxx]

Originally Posted by Darksun280 meh

lol, just having fun late at night...

not even in a bad mood but I remember the shit this kid states and had to stop it.

[Darksun280]

yeah I remember this dude.

O.P move on with your life, which happens to be the same direction as off this site......