I think I am going to buy my first speed3 today

[WAMBUSHHHH!]

Hella horns are fucking stupid. If you're going to upgrade the horn, either go with a boat horn or nothing at all. My bike has a boat horn on it. It's fucking hilarious.

[aaronsleeps]

Grats op.
The mounting point of the supertones is kinda silly but honestly they sound way better than our stock horns. Great for scaring the dogshit out of bad drivers.

[tom clement]

Originally Posted by MS3Shadow Hella horns are like $80-120 and they are louder and the stock horn kinda sucks. sent from my Nexus 6P

Thanks for the info in that case I may just keep them.

[tmillner]

I use 2x4. I drive up on them then the ramps

Sent from my SM-N920P using Tapatalk

[iggypop]

Tom , you know we were pressed for time and I was trying to hurry up with the inspection while you had the test drive. It was very hard to tell if it had any boltons.
Do you remember what I told you about being driven hard? Judging from the excessive amount of shifter play the car was driven hard alright!

If you are having buyers remorse, reach out to the dealership and let them know how you feel.
You know you wanted a low mile 2013 with tech and you got it!
Either accept this car for what it is and start modding, or I don't know what to tell you my friend lol.

[tom clement]

Originally Posted by iggypop Tom , you know we were pressed for time and I was trying to hurry up with the inspection while you had the test drive. It was very hard to tell if it had any boltons. Do you remember what I told you about being driven hard? Judging from the excessive amount of shifter play the car was driven hard alright! If you are having buyers remorse, reach out to the dealership and let them know how you feel. You know you wanted a low mile 2013 with tech and you got it! Either accept this car for what it is and start modding, or I don't know what to tell you my friend lol.

No worries i am cool wit the car I am just looking forward to having it checked out fully. I was very happy with everything you did for me please don't think otherwise!! I already orderd cabin air filters for it and now will get some jack stands and a jack. Looking forward to making it mine. I gave it a good washing yesterday. Loving it so far. Taking it for a drive soon in fact.

[iggypop]

Originally Posted by tom clement The car sits too low to drive up on the ramps. I was hoping to use them for oil changes too. I guess you just jack the car up and do oil changes on jack stands?

Maybe it's lowered? This reminded me we never checked the springs. See if you can take a picture of the rear springs or the front springs. Easier to see in the rear, btw.

[tec_41]

Originally Posted by tom clement and now will get some jack stands and a jack

Take it from someone who's purchased way too many cheap jacks. Invest in a nice low-pro racing jack right away!

[tom clement]

I found this

Amazon.com: Torin T82751 Pro Series 5500 Heavy Duty Floor Jack: Automotive

Amazon.com: Torin T82751 Pro Series 5500 Heavy Duty Floor Jack: Automotive
Amazon.com: Torin T82751 Pro Series 5500 Heavy Duty Floor Jack: Automotive

[tmillner]

You'd be better off going to harbor freight

Sent from my SM-N920P using Tapatalk

[tom clement]

Originally Posted by iggypop Maybe it's lowered? This reminded me we never checked the springs. See if you can take a picture of the rear springs or the front springs. Easier to see in the rear, btw.

Good idea will do. I guess I cold just measure from the ground to the bottom of the front fender?

Originally Posted by tmillner You'd be better off going to harbor freight Sent from my SM-N920P using Tapatalk

Thanks any particular model?

[tmillner]

uploadfromtaptalk1455315040590.jpg

Sent from my SM-N920P using Tapatalk

[tom clement]

This one seems to be well rated.

1.5 Ton Compact Aluminum Racing Floor Jack with Rapid Pump®

[tmillner]

Any one like that will do. What i did was get some hockey pucks and cut a groove thicker than the pinch welds on the side of the car. I put the pucks on the jack and used that to lift

Sent from my SM-N920P using Tapatalk

[tom clement]

Originally Posted by tmillner Any one like that will do. What i did was get some hockey pucks and cut a groove thicker than the pinch welds on the side of the car. I put the pucks on the jack and used that to lift Sent from my SM-N920P using Tapatalk

Not too many hockey pucks in Florida. But I have plenty of chunks of wood I can use.

[tmillner]

Amazon homie, that's what i did

Sent from my SM-N920P using Tapatalk

[tom clement]

Cool thanks

[crankshaft]

I'd consider this one for 10 bucks more - longer reach and more height.
3 ton Low Profile Steel Heavy Duty Floor Jack with Rapid Pump®

I also got a hockeypuck online

[tom clement]

I got the lighter one. With my age and bad back I sort of had to . Thanks man

[iggypop]

I got this one from Costco last month.
Costco 3 TON Arcan Steel/Aluminum

[tom clement]

Cool I haven't used mine yet. I did just get done my first little project. I replaced the cabin air filters.

They needed it.

[tom clement]

I am not sure where to post questions about th eI-pod hook up in my car. It either won't recognize it or will not remember what song it was on and start from song #1 on the I-pod everytime I start the engine. Has this been problem covered before?

Thanks all

[tom clement]

Originally Posted by tubeman I will have a completely stock 2013 w/tech for sale in the next month when my new car gets in. I am in Melbourne FL. Car has 30,000 miles, one owner, silver color. Will be listing for $20,000.

Good luck with the sale I already bought one. Do you have any issues with using an Ipod in yours?

[tubeman]

No issues with ipod or blu tooth streaming from Pandora. Does yours have tech package?

[tom clement]

Thanks yes it does have the tech package. It was suggested that I try just loading the songs on to a thumb drive and plugging that in. So today I will give that a try.

[iggypop]

Originally Posted by tom clement Thanks yes it does have the tech package. It was suggested that I try just loading the songs on to a thumb drive and plugging that in. So today I will give that a try.

Either way the car will see it as iPod. You'll have to leave the USB thumb drive plugged in for it to pick up where it left off the next time you start the car. It's probably the same thing with iPod.

[.Slug]

Mine is recognizing a San Disk usb 3.0 128gb. So get something large, it can read it. No lag between folder/song searches and launch time either. (*note I do not have tech package)

[impossible]

Originally Posted by tom clement This one seems to be well rated. 1.5 Ton Compact Aluminum Racing Floor Jack with Rapid Pump®

That's the jack me and my brother share, pretty solid but if you can spare the bucks go with the slightly lower/longer one with slightly higher load capacity since you can get the jack further under the car.
2 Ton Aluminum Racing Floor Jack with Rapid Pump®

[tom clement]

Originally Posted by iggypop Either way the car will see it as iPod. You'll have to leave the USB thumb drive plugged in for it to pick up where it left off the next time you start the car. It's probably the same thing with iPod.

Thanks I left it in the car and started stopped the engine a few times and it always starts back at the first song. It does recognize it faster than the I-pod though so that is a plus.

Originally Posted by impossible That's the jack me and my brother share, pretty solid but if you can spare the bucks go with the slightly lower/longer one with slightly higher load capacity since you can get the jack further under the car. 2 Ton Aluminum Racing Floor Jack with Rapid Pump®

Thanks but bucks are tight so i went with the smaller one. I hope to get under the car today.