Mazda MPS 2011 - Modification list (need advise\confirmation)
 

Hi All,

i have black MazdaSpeed 3, 2.3L Turbo Charged
i am planning to purchase the bellow, and get it installed somewhere:
1) Sure full intake with return pipe
2) Autotech hpfp (High Pressure Fuel Pump)
3) Turbosmart dual blow off valvue
4) downpipe
5) Top mount intercooler
6) COBB Unit + ECU Tuning
7) NGK laser iridium spark plugs
8) Rear Motor Mount

would appreciate your inputs about the list,
i am looking for a day to day drive, no racing tracks or raping the car, just for fun from time to time
looking towards the 350 HP with this equipment installed
in my place, would you have done it different?
anything is a MUST to add to the list in order to balance the car and not break it apart?
any useless items that you think wont really help so much?

would so much appreciate your detailed, clear and professional answer

thanks in advance!

might wanna spend some time doing some research here.

there is no professional answers here. only hate.

Good deed of the day:

If your going to get a tune, make it an E-Tune from one of the many we have here. and donate, that will hold off some of the hate.

You dont need internals or a tune right away. That can be the last thing to do if you want to wait.

internals yes, he drives a pu.

tune, not really needed until your done modding.

I know all this by using the search function when I was new/still new.

Good luck with your 350HP goal with those mods listed...

You do need to search up a little tho. good start to the list.

Welcome and good start to the mod list.

And yes, you do need FP internals.

Order a BCS when you order your intake because you will probably break the OEM BCS during the install. If you don't break it,... you'll break it.