Mazdaspeed Forums

Mazdaspeed Forums (http://www.mazdaspeedforums.org/forum/)
-   Gen2 MS3 General Discussion (http://www.mazdaspeedforums.org/forum/f544/)
-   -   For the members in New York State (http://www.mazdaspeedforums.org/forum/f544/members-new-york-state-202157/)

Puman_chu 05-22-2016 11:14 AM

For the members in New York State
 
What do you do for inspection regarding your AP? I currently have AP,HPFP,cattlessDP with no CEL and I need an inspection soon I'm running the Ap stage1 OTS tune. Do I leave it and just get inspected or do I load a stage 0 tune then go for inspection?

mxlplx71 05-22-2016 11:22 AM

a quick stockout would be ideal. the catless dp is probably not going to pass

Boost_creep 05-22-2016 11:28 AM

You are allowed one "not ready" monitor in NYS.
My car passes with the AP and all mods installed, including a downpipe.

MS3Shadow 05-22-2016 11:31 AM

I passed with Catless downpipe and racepipe. I did my AP readiness and it also says Cat is ready even though nothing is there.

Do you have a visual or OBD testing?

sent from my Nexus 6P

mxlplx71 05-22-2016 11:35 AM

im soo glad theres no inspection in iowa

Puman_chu 05-22-2016 12:04 PM

Quote:

Originally Posted by Boost_creep (Post 3055971)
You are allowed one "not ready" monitor in NYS.
My car passes with the AP and all mods installed, including a downpipe.

Is your DP cattless?

Puman_chu 05-22-2016 12:14 PM

Quote:

Originally Posted by MS3Shadow (Post 3055975)
I passed with Catless downpipe and racepipe. I did my AP readiness and it also says Cat is ready even though nothing is there.

Do you have a visual or OBD testing?

sent from my Nexus 6P

Obd 2

MS3Shadow 05-22-2016 12:41 PM

Quote:

Originally Posted by Puman_chu (Post 3055987)
Obd 2

If your AP has a readiness test, run it to see what is not ready and see what is?

sent from my Nexus 6P

Puman_chu 05-22-2016 12:55 PM

Quote:

Originally Posted by MS3Shadow (Post 3055991)
If your AP has a readiness test, run it to see what is not ready and see what is?

sent from my Nexus 6P

How do I do that?

Thepedigree13 05-22-2016 02:06 PM

Hey there can only be one Pu Manchu here!!!

Pu Manchu 05-22-2016 02:37 PM

cease and desist!
edit: and get an avatar for christ's sake

MS3Shadow 05-22-2016 04:12 PM

Quote:

Originally Posted by Puman_chu (Post 3055993)
How do I do that?

Update your AP if needed. And when it's updated, it should appear when you check for codes.

sent from my Nexus 6P

Boost_creep 05-22-2016 07:19 PM

Quote:

Originally Posted by Puman_chu (Post 3055985)
Is your DP cattless?

No, but I have the dtc disabled in atr, so that's my one "not ready" monitor.

SnailSpeed3 05-23-2016 07:53 AM

EGR delete and catless and haven't had an issue yet (edit: Worth mentioning that I just renewed the inspection about a month ago and, again, no issues)... I just usually remove my AP and cable and stash it in the glove box or bring it with me when I leave my car. I'd say just go for it if you have no CELs and worst comes to worst you'll fail and they'll give you a 10 day temp to stock out and re-test...

Puman_chu 05-23-2016 08:15 AM

I have to set up my atr I seems like it is not executing in my c drive gonna have to contact Cobb. All that works is my access manager software.

Puman_chu 06-04-2016 10:43 AM

Quote:

Originally Posted by SnailSpeed3 (Post 3056181)
EGR delete and catless and haven't had an issue yet (edit: Worth mentioning that I just renewed the inspection about a month ago and, again, no issues)... I just usually remove my AP and cable and stash it in the glove box or bring it with me when I leave my car. I'd say just go for it if you have no CELs and worst comes to worst you'll fail and they'll give you a 10 day temp to stock out and re-test...

I failed my inspection today 2 not readys no cel and I did my install 2 weeks ago.

SnailSpeed3 06-06-2016 11:34 AM

Quote:

Originally Posted by Puman_chu (Post 3059721)
I failed my inspection today 2 not readys no cel and I did my install 2 weeks ago.

Damn, that sucks... You may just have to stock out once a year to get it inspected, shitty as it is to have to do

Boost_creep 06-06-2016 12:13 PM

Quote:

Originally Posted by Puman_chu (Post 3059721)
I failed my inspection today 2 not readys no cel and I did my install 2 weeks ago.

Which monitors came up not ready?

Puman_chu 06-10-2016 04:06 PM

Quote:

Originally Posted by Boost_creep (Post 3060121)
Which monitors came up not ready?

Readiness fail
Monitor Catalyst Not ready
Monitor O2 Not ready

Puman_chu 06-10-2016 05:58 PM

Update took a nice drive to jones beach when I got back I checked my readiness on my ap and everything was ready. So I went back to the jiffy lube where I failed and passed everything is all good now.

Pu Manchu 06-12-2016 08:39 PM

cool, now just change your avatar and avoid boost leak tests.


All times are GMT -7. The time now is 02:25 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
SEO by vBSEO ©2011, Crawlability, Inc.
vB.Sponsors

©Copyright 2008 ; 2019 Cymru Internet Services LLC | FYHN™ Autosports HQ
Ad Management plugin by RedTyger

Page generated in 0.18277 seconds with 11 queries