What did you do to your ride today?

[SGTMS3]

Ordered Cobb APv3, CS Down pipe, TMIC, and CS Internals.

[Jzen16]

cut out the mufflers in my obx exhaust..sounds great!

[ouchmonkey]

Originally Posted by BPASPEED Is this the shop in Chatsworth?

Yup.

JB Customs - 20371 Prairie St. #4 Chatsworth 91311

Ask for Jose - tell him how you heard of him.

[Shampu]

Originally Posted by ABOSWORTH Can you really even tell the difference with those shifter bushings? I've heard mixed reviews on them. some say they are great, some say they don't do shit. I can't really see how they'd help much but I do understand how they are supposed to help. Just not sure if I actually buy it. LOL

Yes. There was a good amount of difference when I swapped (around 13K or so. Car feels much better now.

[ABOSWORTH]

I got my vent mount for my AP and put it in after helping a buddy change his starter. Got it from Bestbuy. Com for like 6 bucks shipped. uploadfromtaptalk1398822452202.jpg

[ABOSWORTH]

Here it is in the car. uploadfromtaptalk1398822658388.jpg I'll post a better pic tomorrow when it's light.

[Z32_MS3]

Adjusted my front coilovers and gave her a good wash

[Tedspeed6]

Changed tranny, front and rear diff fluids.

[Billcraft78]

Originally Posted by SparkySparks Added some rice under the hood. Attachment 157639 Sent from my SPH-L710 using Tapatalk EDIT: Added pictures of the modified pieces so the hood struts had a place to go. I still need to add a backing to fill in the slots I had to cut as well as work out a way to access the windshield washer fill.

Nice rice, where's you get the CF at? Cleans up the bay and looks good!!!

[Tremmy2]

Finally got around to disconnecting my EGR. Still trying to figure out why it took me so long.

Sent from my HTC6500LVW using Tapatalk

[SparkySparks]

Originally Posted by Billcraft78 Nice rice, where's you get the CF at? Cleans up the bay and looks good!!!

Bought it from a local for a fraction of the cost new. It's all Passwrd:JDM.

Sent from my SPH-L710 using Tapatalk

[PapaBruno]

Originally Posted by SpeedLife Installed the new corksport short shifter Sent from my Pu

That CS Short Shifter is damn sexy. Gotta look into picking one up.

Sent from my HTC One X+ using Tapatalk

[BPASPEED]

Changed the transmission oil and added a magnetic drain plug from @RallySportDirect;.

Sent from my SCH-I535 using Tapatalk

[3wheeln]

This took a little while. First time laying vinyl.

[Jzen16]

Painted my tech head lights '13..

before pic

[chrisjnas]

Originally Posted by Jzen16 Painted my tech head lights '13.. before pic

better before and after plz. also, how hard was it to work on the auto leveling lights on the tech package? i've been wanting to do this but am scared shitless of cracking them open.

[Jzen16]

I stayed up spur late doing it, sorry, only shot I could muster up at the moment.
Now it's morning..


crappy shot of before.. I should've taken one. I really don't have a good shot of that

And tbh it not fitting in the oven made it a pain in the ass.. I must've been using the heat gun wrong or somethingg but this took quite awhile. Disassembly of the headlights is really simple even with tech. I never touched the AFS as it's part of the projector shroud and I left that piece chrome while I painted everything else gloss black.

If you do do it, have an extra hand.. Helps. I followed the DIY and isn't as easy as pictures x_x
I'd purchase some extra silicone sealer as well to be safe..

[Jzen16]

for reference this is all I painted on one headlight, 3 separate pieces,

this is without the led covering and the turn signal pieces.
turn signal pieces

If anyone is attempting it, feel free to ask although it's been covered.. I'm sure I can answer

[Z32_MS3]

Originally Posted by Jzen16 Painted my tech head lights '13.. before pic

That looks really good blacked out shittt

[Shampu]

I wish I had the balls to paint these lights. I did it to my old Miata, but I cant bring myself to paint $1000 lights....

Looks really good though.

[tommyboy]

Putting a GTX3076R in my car.

[Blkpearl]

Went to the gas station got some more e85 did some 3rd n 4th gear logs for rich.

[Jzen16]

So when you don't wanna run e85 do you just drive till empty then flash on a regular 91-93 map and fill up 91-93?

[grazamataz]

^ yep that's the ticket

sent from my phone because it's 2014

[gmoney542]

Originally Posted by Jzen16 So when you don't wanna run e85 do you just drive till empty then flash on a regular 91-93 map and fill up 91-93?

Yeah, just run the tank to empty then fill up and flash back to your 91-93 map.


I finished putting my car back together today and started it after doing my VVT and timing chain. First time it's run in almost three weeks. Everything's good and no more VVT rattle on startup and chain slapping the valve cover.

Also put on my JBR side mounts.

[Jzen16]

Cool thanks guys !

[MMApex]

JBR 70 RMM went in today. Like driving a different car!

[Blkpearl]

I run 6.5 gallons of 93 n 6.5 gallons of e85. If your going to switch maps between make sure after you flash ur map, drive 5 to 10 miles before going wot. Flush the lines out of what was in there. I don't see myself going back to straight 93 anytime soon

[Brew City 92]

Finally put on summer wheels & tires (stupid never-ending WI winter) & changed oil.

[mzrtrooper]

I am officially impressed. From now on the RMM is gonna be the first mod I recommend.



Sent from... you know... that one app...

[VR11]

Originally Posted by mzrtrooper I am officially impressed. From now on the RMM is gonna be the first mod I recommend. Sent from... you know... that one app...

For being a 2013, your stock RMM looks beat haha. Surprisingly, my 2011 didn't even look that bad. RMM is definitely a great mod though! only thing I did to my car today was drive it

[biscuit003]

Drove it to work on a beautiful Sunday morning. No traffic, which is amazing for Southern California, so I got to do a WOT pull, just for fun. Now I'm drinking a six pack and getting shit done.

[danlaroe]

cleaned and dipped my rims red
loaded a freektune e85 map and made some smiles

[Alexander]

ap a pillar mount and short shifter installed

[Frenchy11]

Originally Posted by Alexander ap a pillar mount and short shifter installed

I just ordered my short shifter. How do you like that?


Sent from my iPhone using Tapatalk

[mzrtrooper]

Originally Posted by VR11 For being a 2013, your stock RMM looks beat haha. Surprisingly, my 2011 didn't even look that bad. RMM is definitely a great mod though! only thing I did to my car today was drive it

Yeah its more of less just Dusty. Lots of gravel roads near me.

Sent from... you know... that one app...

[ouchmonkey]

Originally Posted by Frenchy11 I just ordered my short shifter. How do you like that? Sent from my iPhone using Tapatalk

I wonder how that'll work in combination with the short shift plate?

[Blkpearl]

It's not suppose to be. Its one or the other. As per spencer.

[chrisjnas]

Originally Posted by Jzen16 anyone is attempting it, feel free to ask although it's been covered.. I'm sure I can answer

Sick. Thanks!

[Tedspeed6]

Made a gasket for and put in TS BPV I bought from someone on Facebook. Couple scratches on it but works and sounds nice.