What did you do to your ride today?

[makjur]

This is not today, just finally remembered about this post...
at a recent t-shirt handout meet Mr. @Lakespeed6; was kind enough to allow some installs to happen that day
autotech internals, ETS TMIC, Cobb TIP (already had Cobb SRI), Grimmspeed EBCS (since the stock one snapped like the bitch that it is)
A week later in went a test pipe (corksport, not that brand matters here)
Still working out a nice map with Mr. @atvfreek;

As far as the installs went...
Removing the stock TIP caused the stock EBCS to break, thankfully someone at the meet was in the process of stocking out for trade-in @RedBliss; thank you again) so I picked up a GS 3 port (but had to plug port 3 since I cant use it, yet)
Fuel pump was a bitch, I wanted to be anal and follow every how-to/manual I saw regarding the internals but wasnt able to (didnt soak in gas, had to use break cleaner instead of whatever the fuck the instructions called for)
After the internals were in the pump, getting the pump back on was where things went stressfull. The bucket that sits inside the housing the pump is attached to was stuck.
We were thinking the cam lobe was in the up position, but a savior from outside these forums was able to finger my bucket just the right way for it to break free.
After that pump went back in no problem.
ETS TMIC went in nicely
Intake piping was tough, still not seated the way I want it to be, going to be taking it out and putting it back in when more time is available.
Car started, held fuel pressure fine, drove it gingerly on my 90 minute drive home, and was noticing LTFT's of +25%
I forgot to connect the hose from the BPV to the TIP
After I connected, everything was nice
Test pipe went in a week later, exhaust note changed nicely, and things are faster
Might have to invest in a new BPV, I hear a fluttering noise at low RPM's when doing WOT pulls (maybe someone else can chime in on this)

[achill24]

Today I found out that my old job still ows me over $1000!
New wheels?

[NickyBIGBallz]

Got in my JBR 88a RMM yesterday, waiting to hear back from my friend to do the install today and also had my windows tinted. Pics soon if this guy ever decides to call me.

[faeker]

Corksport TMM insert.

sent while tapping my dick

[Playaj]

Originally Posted by NickyBIGBallz Got in my JBR 88a RMM yesterday, waiting to hear back from my friend to do the install today and also had my windows tinted. Pics soon if this guy ever decides to call me.

Just do it urself. Easiest shit to do on these cars. Shoulda got the chrome Molly tho ;-)

Originally Posted by faeker Corksport TMM insert. sent while tapping my dick

How does it feel/sound so far? Thinking of getting these myself. Was the install easy?

[faeker]

It was simple enough. I haven't gotten to taken the car out. I left the shop and went home. All of 3 miles of city stop and go.

sent while tapping my dick

[anavrinIV]

Originally Posted by Playaj Just do it urself. Easiest shit to do on these cars. Shoulda got the chrome Molly tho ;-) How does it feel/sound so far? Thinking of getting these myself. Was the install easy?

88a is the chromoly

[Playaj]

Originally Posted by anavrinIV 88a is the chromoly

my bad! reading to fast lol! maybe i was projecting cuz i got the 80 instead :-(

[Big sugaaakane1]

got an ultimate racing catback on....holy shit is all I can say...

[msantana101]

Originally Posted by Big sugaaakane1 got an ultimate racing catback on....holy shit is all I can say...

UR TBE FTW


Sent from my iPhone using Tapatalk

[Dr. Speed]

Got her tinted! 40% front, 15% rear... looks sooooo much better now (sorry for the crappy iPhone pics)

[11MZR]

Originally Posted by Dr. Speed Got her tinted! 40% front, 15% rear... looks sooooo much better now (sorry for the crappy iPhone pics)

I think I'll forever be jealous of the CWP Gen2s

Sent while fuckin' yo' couch!!

[kcny419]

Today i polished my car and installed the shortshift weight and bushings

[Keko]

Washed the car today and noticed a big ass scratch in my front bumper. It happened sometime in the last week but I have no idea how, I haven't gone many places and I didn't ram a curb or anything.

Does anyone have recommendations on the best way of patching it up? I heard Dr. Colorchip only works if it's a small chip, not a giant scratch. The scratch it on the lower part so it doesn't need to be a perfect fix, just blend it. Hard to see up close unless you are checking it out on your knees

[shifter48]

Thrusday put on 245/40/18 Pilot Super Sports.

[BlackBandit]

Installed the Stratified EBCS today in 2-port mode. Easy Peasy Lemon Squeezy. One of the easiest parts to do. Only issue I had is the size of hose Lex recommends (7/32") does not fit well over the barb off the CS intake (which is only 1/8"). I just used the CS supplied hose to connect to the intake, then used a universal connector to connect that to the 7/32" hose from the EBCS.

Only have to remove the TMIC and rear boost tube for this one.

Found a problem with my front H20S sensor. Probably banged up with the DP install last week. Ordered a new one just in case. Got the NGK branded sensor (which is apparently the OEM one anyway on the PU), but you can find it for $120 online, instead of $320 at the dealer.

Update: I had the car at the garage this morning and my tech tells me the front H20s is working fine, its signal fluctuates on his scanner when he pushes the accelerator. He checked the rear and it looks like the extension CS provided is no good with no signal passing through it. So I messaged CS for a new one to be sent out. I guess issues with the rear sensor can affect the front AFR readings, as the rear sensor, calibrates the front sensor.

[Cujo]

UR Performance Muffler

[kcny419]

Originally Posted by Keko Washed the car today and noticed a big ass scratch in my front bumper. It happened sometime in the last week but I have no idea how, I haven't gone many places and I didn't ram a curb or anything. Does anyone have recommendations on the best way of patching it up? I heard Dr. Colorchip only works if it's a small chip, not a giant scratch. The scratch it on the lower part so it doesn't need to be a perfect fix, just blend it. Hard to see up close unless you are checking it out on your knees

Hey man r u in the ny area? I could buff that right out! Maybe even alittle wet sand

[Keko]

Originally Posted by kcny419 Hey man r u in the ny area? I could buff that right out! Maybe even alittle wet sand

Do you live in so cal? Looks like you are in NY so no I'm not

Whatever it was it gouged the paint out, so the black part is the raw plastic of the bumper

[Big sugaaakane1]

Originally Posted by msantana101 UR TBE FTW Sent from my iPhone using Tapatalk

soon

[faeker]

Originally Posted by Playaj How does it feel/sound so far? Thinking of getting these myself. Was the install easy?

To further answer the question, torque steer is almost non existent now coupled with my RMM. Its one piece and it slides in easy enough.

sent while tapping my dick

[SpencerC]

Replaced my drivers side mirror with a new one, along with washing, waxing, and vacuuming the entire car.

[Spoofmastafly]

Originally Posted by Keko Washed the car today and noticed a big ass scratch in my front bumper. It happened sometime in the last week but I have no idea how, I haven't gone many places and I didn't ram a curb or anything. Does anyone have recommendations on the best way of patching it up? I heard Dr. Colorchip only works if it's a small chip, not a giant scratch. The scratch it on the lower part so it doesn't need to be a perfect fix, just blend it. Hard to see up close unless you are checking it out on your knees

Doctor Colorchip wont work for you. It binds to the factory primer. Since that scratch is to the plastic, whenever u go to whipe the paint it'll just come off. I did the same thing. Even with smaller chips through the primer I tried building up the paint and letting it dry for longer amounts of time. Just wouldnt setup. Had my bumper repainted.

Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

[faeker]

Wet sand, fill, sand, paint, wet sand, clear. That's just to make it OK looking.

sent while tapping my dick

[shadow102]

Installed the prosport oil pressure gauge in a vent pod today, worked out pretty good and still lets me put two more gauges in when i get the defrost vent pod i ordered.

[Pseudonym]

finally installed my rear half of my coilover setup a couple days ago and just dialed it in today.

[Booosted2010]

Put my mud flaps in a few minutes after the UPS guy came...image.jpg

[Spooldu]

Sway bar end links, New bushings and ground the bar down and painted it .uploadfromtaptalk1367587918104.jpg

Sent from my PG86100 using Tapatalk 2

[SLOWHATCH]

Originally Posted by Keko Washed the car today and noticed a big ass scratch in my front bumper. It happened sometime in the last week but I have no idea how, I haven't gone many places and I didn't ram a curb or anything. Does anyone have recommendations on the best way of patching it up? I heard Dr. Colorchip only works if it's a small chip, not a giant scratch. The scratch it on the lower part so it doesn't need to be a perfect fix, just blend it. Hard to see up close unless you are checking it out on your knees

There's a place that will make you a can of aerosol factory match touch up paint online for like $22 shipped. Just provide the paint code. The name escapes me right now but that's prob your best cheap fix. Tape around the affected area and lay some spray paint on it.

[JTMS3]

Automotivetouchup.com or something like that for OEM paint colors in rattle can.

Sent from my EVO using Tapatalk 2

[evil MS3]

Touch Up Paint from PaintScratch.com

[apawk]

Originally Posted by JTMS3 Automotivetouchup.com or something like that for OEM paint colors in rattle can. Sent from my EVO using Tapatalk 2

automotivetouchup.com is WIN. They carry the best clear coat in a rattle can EVAH!!!

[NickyBIGBallz]

Originally Posted by Playaj Just do it urself. Easiest shit to do on these cars. Shoulda got the chrome Molly tho ;-)

Isn't the 88a the chrome molly? I got this one

Rear Motor Mount 88a Durometer [MZ3MS3MollyRMM] - $100.00 : James Barone Racing, Custom Fabrication

Also my friend has a better jack/jack stands plus an impact gun. Just ordered corksport front and rear sways so we're gonna throw it up on the jack stands and bang it all out in an hour or two.

[trixms3]

Installed the accessport and flashed cobbs OTS stage 1+ SF 93 Oct map. Noticeable gains from running lean with the intake. Next up. HPFP internals

sent while pressing send....I SAID SEND!! SEND IT NOW

[Dr. Speed]

Washed, clayed, and Klasse'd my '12 CWP. See "pics of gen2 thread" for hi-res pics.

[Kyle Undefined]

Washed, vacuumed, and detailed the car.

Oh, and installed a new map revision from Rob.

[SpencerC]

Renewed Insurance. Always my favorite activity.

[SpeedRebirth]

Installed the JBR PMM on a friends MS3 -07. Great quality @jbarone; !! He was very very pleased with it. Next project for him is RMM and TMM.

I've got the JBR RMM and im buying the PMM+TMM combo as soon as its released! We're all getting mounted thanks to you JBR

[shadow102]

paid the registered on my car and found out i dont have to pay a dime in ad valorem tax anymore...stupid ga tax law.

Also installed the mazda air freshener i got courtesy of @MOCO MS3; wife

[leon78]

More race car.

Sent from my yotaru