WOOT
 

Finally got an AP. Flashed S1 CS map, need to take a few logs with it tomorrow after I get off work. But the car feels great. Also, huge thanks to @eric@edgeautosport.com for a great deal and kickass customer service. :banana:

Give that map 100 miles n then let er' rip. Congrats dude, that new tune will have you feeling like that little banana emote... lulz

Well, before lettin er' rip I'd take a few logs and make sure you can maintain at least 1400psi. There are folks, including myself, that have seen dangerously low fuel pressure (773psi in my case) with just an intake and Stage1. You'll also know you are running low FP if you get a "faceful of steering wheel"; if that happens don't even attempt logging, flash stage0 or safe map, and upgrade CDFP.

-1 for bad subject line.

@fortressofcomfort is right on (both times)

Getting my AP, SRI/TIP, RMM, and Internals in May, trying to stay away from this place until then but cant...
Dont want to chance anything so I'm buying everything at once, trying to see if I can add a TP to the list or if I have to wait a bit

Good looks and good luck OP

At least 1500 psi but that is a minimum 1550 or 1600 is what I would want to see.

Heard that, I meant to say flash safe mode first and foremost. Download the free beta of access tuner and start reading up on some tuning guides. Abilors tuning guide is a good one.http://www.mazdaspeedforums.org/foru...e-noobs-83959/ Trust me, I was running a stage one map and getting a very uneasy response from the car. Flashed safe mode and adjusted my exit delay A to 20. Car feels great now with all my HPFP ranges in the 16's. Patience is a vertue. Get internals.