Here's one for @mituc

http://media.giphy.com/media/Zjm4OVIAcPxhS/giphy.gif

Looks like we got the shaft?

http://www.mazdaspeedforums.org/foru...1&d=1437252899

well @Matt@HTP; responded in another thread today so hopefully he'll have time to toss an update this way. if not, i'm sure some cats will pop up.

Continue posting cats in this thread.

I will start another thread tomorrow (I know I was going to do it before but I got entranced with cats) in which we will discuss our design in detail, interest in the tank, and cost (will be based on interest). Pricing will be dictated by how many people are actually in 100% for this product. That interest, or lack thereof, will then dictate how many more cat pics there will be. I will say that the redesigned Gen 2 tank is done (designed, prototyped, and tested but not anodized), Gen 1 uses the same tank, fill method, but we have one bracket to finish.

All this will be laid out in greater detail and we will see where this will go, or we will see it go nowhere, but at least you will know why.

Here is a sneak shot of the pump brackets.

Our diligent posting of cats paid off brothers! huzzah!

Why you cover blueprints? It's a cat tower isn't it.

the cats worked, now we just need 50 more pages of cats to get the tank released

Should we take cats into cp-e's intake manifold thread?

I'm going to be that guy....... Any chances this will work with the 6?

the better question would be what thread shouldn't we take the cats into?

God damnit!

You probably just ruined it of all of us. Fucking 6 guys.

Nope, I will throw the 6 into the mix though and we will see what becomes of it.

What about cat shaped chest hair?
http://images.tapatalk-cdn.com/15/07...fef3828a42.jpg

tapatalk, it sucks

^ Would love to be that hair.

6 weeks.

I'll be keeping an eye out.

I'll be keeping a brown eye out.

http://i.imgur.com/4E4j9WV.gif

he's alive.

http://images.tapatalk-cdn.com/15/07...699e71af75.jpg

tapatalk, it sucks

http://images.tapatalk-cdn.com/15/07...ffc8519c2d.jpg

tapatalk, it sucks

http://images.tapatalk-cdn.com/15/07...43ef255bdf.jpg

http://images.tapatalk-cdn.com/15/07...41b4f803dd.jpg

http://images.tapatalk-cdn.com/15/07...8d533c597e.jpg

tapatalk, it sucks

http://images.tapatalk-cdn.com/15/07...f0a8334001.jpg

tapatalk, it sucks

@Matt@HTP; stop horseplaying on vacation! :love:

As to interest, I have a DVC30 kit waiting for a 'real' bracket/tank solution.... On a genpu...how soon is meow?


But it isn't respectable. It's mildly terrifying. And that actually makes it quite appealing. - Mazda 3 MPS review, Matthew Jones, Top Gear.

It's been almost a full 3 years since Matt started this thread. I wouldn't wait to install install your kit. Tap your washer fluid tank for now. If you want a level sensor, install one of the self sealing deals or get the mz5/Canadian tank assembly.

Still waiting ... [emoji28]

[emoji234][emoji249][emoji250][emoji197][emoji192]

Might need more cats.

Sent from my HTC M9

Indeed

http://imgfave-herokuapp-com.global....54_animate.gif

http://media2.giphy.com/media/b3rbghhoMrhII/200w_d.gif

Sent from my HTC M9

Because boobytrap

http://imgfave-chat-herokuapp-com.gl...31_animate.gif

http://media1.giphy.com/media/E5EUmJssOooGk/200w_d.gif

Sent from my HTC M9

Getting multiple requests from multiple members for multiple vendor pages, to please chill out with the cat pics, as it derails the threads and pollutes them to the point the real information when posted, is likely to be unseen. So I am asking to stop the derailing. Or as the other crowd informs me I am doing, is making MSF boring and push old members away or something.


Here is the official "discussion section"
http://www.mazdaspeedforums.org/foru...nifold-192475/

Wouldn't a thread have to be on rails to be derailed? This thread is the perfect place for cat pictures after literally years of delays and broken promises. As far as other threads... I agree.

I thought we were striving to become the number one cat gif forum.

@HTP; is this your meth tank?

It is.

Is it in production, if not when, and at what price point.

Is this 100% going into production? If yes I'm going to wait it out to go meth...


Sent from my iPhone using Tapatalk

Yes, 100%. Introductory offer/price point will be posted.

I peed a little.

hopefully in your litter box

I'm going to need a tank eventually, might as well get in on some of this action.

I'm thinking the same thing... Don't want a tank in my trunk and don't want to half ass rig something with a standard plastic tank


Sent from my iPhone using Tapatalk

2.5 gallons eh @Matt@HTP;?! You all grew it up a little.

I would never recommend meth in a passenger cabin. Sure the meth can be diluted so that it's not flammable, but I still wouldn't want 250-300psi lines in there with me.

We wanted it to be enough volume for the meth addict to be able have good drive time between fills. We built bigger but slimmed it down to a nice size that made fabrication easier.

Just an idea, the tank location (just behind the bumper) may be risky if involve in a nasty accident. It might be worst case scenario which it could ignite and blow up and whole engine is on flame. What about some crash bar or some reinforcement in front of the tank?

If you are concerned about the consequences in an accident run 50/50 mix.

If your crumple zone is folded in that much to hit the tank, your car is probably totaled anyways. Plus this tank is probably much more durable than those 20 dollar plastic jobs that are normally in the same location.

Absolutely, HTP made tank is much more rigid than plastic version. And, because it is race car. LOL.

Time to get ditch the push-loc fittings to AN fittings.

This is why all meth injection companies recommend a non flammable dilution.

Is it MS6 compatible?

There will be a MS6 version but it will require battery relocation to the trunk (we make a relocation kit).

What type of port/fitting is provided on the tank to connect to the pump?

Need this

Sent from my SAMSUNG-SM-G900A using Tapatalk

The outlet port is 1/4"npt fitting. This will allow you to run a 3/8" or -6an feed line to the pump.

I know what would make my new year happier.

https://soliloqueue.files.wordpress....nary-dicks.gif

Except with meth tanks and not imaginary dicks.

You would be just as happy with dicks admit it Fag.

Meth Tank Pre-Order information can be found right here.

Let me clarify some things for Matt:

"For the MS6, we require a minimum of 2 pre-orders. The deadline is Wednesday, April 19, 2017. The introductory discounted price is $2,999.99"

Funny thing is, our MS6 design is way easier to make, and I have more confidence that it will sell better than the MS3 tank. MS6 folks put their money where their mouths are. We will see how it plays out.

Speaking of MS6, how bout that FMIC core?? *poke* *poke*

Ordered.

Would this support using >50 meth content?

And I'm ordering one as well.

sent from my Nexus 6P

It does. I would not recommend running more than a 95% concentration of meth for it to be friendly with everything it passes through.

Ordered.
Now to find a way to get a 3/8 NPT outlet on my Snow Performance pump.

If you have push connect fittings in an existing setup and you don't have the volume supply needs to the pump then something like this will work. 90 Deg Instant Fitting


Originally we had the outlet as 1/4" npt but have updated that to 3/8". Fittings to run it either way are more readily available as 3/8"npt.

That's perfect! Thanks!
Is there any way you can notify us of how many people have ordered (maybe a week or so before the pre-order ends)? I'll be curious as to if this comes to fruition or not. Lol

Ordered (:

Sent from my SAMSUNG-SM-G900A using Tapatalk

We will be starting another thread today that will have an updated count listed. We are ready to go on these as soon as we hit the goal.

@Matt@HTP; Will soon be in production of unicorn tears. Another great product brought you by the folks of HTP. Way to go guys!

Does the credit card get charge immediately when you pre-order or will it be charged once the minimum of 15 pre-orders have been made?

Great question! Payment is due up front, at the time the pre-order is placed- so your credit card will be charged. In the event that the minimum is not met by the due date, all orders would be immediately refunded to the original payment method. At this rate however, I don't believe that will be a concern. As soon as we have 15 orders paid, we'll immediately be moving forward.

Does the 15th person get a "special" prize?...maybe free shipping to alaska for <<<--- this guy :fingersx::fingersx:

I should get a special cat tank. Make that happen HTP.

Shit, you and Katie bonded.

I bond with everyone. Sometimes it's called "docking".

I was able to find alternative sources for this fitting on Amazon.

Plastic:
http://www.amazon.com/dp/B009PT6VAU/

Nickel-plated brass:
http://www.amazon.com/dp/B009PTIW16/

The plastic one is slightly cheaper than the one from DO and looks like it's basically the same thing. The nickel-plated brass one is a little more expensive, but for a few more dollars I think I will order it instead so that I don't have to worry about longevity/durability.

How many have been purchased and how many are left?


Sent from my iPhone using Tapatalk

He made another thread showing the count.
http://www.mazdaspeedforums.org/foru...d.php?t=197679

sent from my Nexus 6P

AIS also carries all sorts of meth fittings. Swiveling stuff too which is most beneficial.