alex coming back to cali!
 

@Haltech (top dog)

@Daddy Chinkus (derek)
@keefover (jordan)
@SleeperHatch (gale)
@TRSpeed (aaron)
@Whiteboy (jon)
@another 6cms6 (tony)
@BPASPEED (Arnaldo)
@JohnMS3 (john)
@turbo test (daniel)
@Hamilton69 (graham)
@midoritora (meynard)
@UnknownSuperhero (GREG)
@Phoenix Speed3 (brenden)
@TheDeebs
@darth_speeder (alex)
@xI Leveler Ix (greg)
@jv83 (?)
@TheHotRoommate (hotroommate)
@supertubesocks (idgaf)
@Boosten Ya(josh) (josh)
@Hamilton69 (grahm)
@krazycoble (angry daniel/roided daniel/jason)
@Apexed (shawn)
@Todd98SE (Silver GenPu in the El Cajon area. Yes i have the same matte bronze Nurburgrings as every other GenPu owner.)
@Micha (sailor feg)
@hung380 (viet chank)
@Dash08 (tony)
@blam1 (bINH)
@Oliverms3 (olive)
@Davy180 (davy)
@Danish (scissor jack master technician)
@Cornerfreak (Brian)
@NRSpeed (Shawn)
@JCMS07 (Julio)
@Breakdown81 (Tom)
@Ex_WRX_driver (DYLAN)
@lilred (jose)
@DickFitzwell (aaron)
@L0ve my MS3 (Araceli)
@feldm4n (matt)
@MS3MYK (Mike)
@m4tic (Boynton)
@dlindberg2nd (has seen my balls)
@ericdebruyn1 (Eric)
@himurax13 (john)
@Zbrit00x (zayn)
@yanikemt (Yanik)
@ms6forthewin (kay)
@ms3rick (rick)
@jdmkutz (Ryan)
@hadewji (Hussein)
@scoot3r90 (Scott)
@Zoomspeed (sal)
@radioflyer (corey)
@grease_monkey(Julie)
@Mfinlay04 (Matt)
@Familyguy427 (John S)
@insomniacucr (ian)


@Lex


so far its only in the works but heads up, he is shooting for dyno tunes for you bt dudes.

planned date is sometime in september

WOOOOOO!!!

@Lex
Maybe he can tune my ms3 this time......














Oh wait.... what ms3?

I'll have my IC by then an ready for a tune hopefully

@Daddy Chinkus Let me know if I need to take a off of work for the hangover! Lol

O Greg gave me your gauge? Something of yours is in my hatch
tapafuck

Fuck yeah

lol You were gonna bring it to the deeberts after pepe's It's your compression tester Chinkus.

In my defense I took it there just never made it out the car cause I was drunk haha

tapafuck

Lets do it!

Sent from my Evo LTE

How bout my small turbo speed 3 ehhh? No seriously.

In for tune and dyno after my slow ass build lol, perfect time just before MAZFEST!!!

who cares how i sent it!

Sweet. Then maybe I hop on the dyno.

I'll dyno too! My lex toon will be done by then!


Sent from my dizzLe using RaWr powers!

i guess he liked hooters since they don't have that in canada. :biggthumpup:

Nice.

Im in for the kill as well!!! Ill be BT by then for sure!

@Daddy Chinkus, add @povee to the nator member list =)

Great, this should be the best gangbang yet... What date is he coming?

If your going to take the guy to a place to eat, at least take him to a place that serves good food.

Yes we do

Tune my ride pleazzzzzzz
Make it happen

I'm out for labor day. We have our yearly camping trip.

@TheDeebs I'm down for all of this and if you need anything let me know.

I have to work Monday :( lol fail to see where the dyno tuning will happen?

tapafuck

Probably church's again which is far as fuck

Sent from my Evo LTE

I ment from Deebs plans wrench Saturday cruise Sunday leaves no dyno

tapafuck

Anxious to know the date so I can requet said Sunday off

tapafuck

still waiting 431 whp anyone?

The chinkus killer is ready

Ill show up with my 6262 built evo 8 rs

Sent from my DROID4 using Tapatalk 2

LOL

Um most dyno shops are closed Sunday unless you make arrangements.. and they will cost you $$ for that sunday arrangement.

I can map out a nice drive within 30 minutes of anywhere in so cal for a Sunday.
@TheDeebs

Im in for a tune too. Just need dates like the rest.

Would prob be better to e-tune, and then he can do the finishing touches from dyno logs? Just sounds more efficient? :) ask him! @Lex


Sent from my dizzLe using RaWr powers!

I PM'd him... Either way, I dont have anything to data log and I'd rather just give it to the man and pay more and just be done with it haha... and Im busy and I dont want to screw it up haha

get all your mods installed then get a tune. I can help you get a safer tune after you get your AP

I will... Just trying to get a date & info. what do you guys like to use for data logging? I hear people talk about it but havent seen exactly what people use

you can datalog with ether the AP or a laptop

Sounds easy enough. Just sold a Pearl Jam concert poster on EBay for $760!!!. And I have one more.... Ordering my Cobb AP later this week ;)

:) @Lex does an ap/tune combo! Www.stratifiedauto.com


Sent from my dizzLe using RaWr powers!

Nothin.g beats tuning on a dyno. I don't know any dates, this was brought to my attention so we are still planning

If I could get this pesky exhaust leak fixed :(.

How did this happen?


Sent from my dizzLe using RaWr powers!

Woah this grew fast and that's awesome :). I'm traveling for the next week or so - so I haven't been able to stay on top of this thread ... and PMs. One pretty cool piece of this trip for today is that I got to spend a good 3 hours driving the 2013 Focus ST. Autocross, highway, city, backroad multi gear pulls.

I will get more details about the trip sorted out in a week or so and will let everyone know. Dyno tuning time is $$ to do from scratch especially since the AP takes a while to flash maps while the car sits and heatsoaks. It's best to get tunes mostly dialed in on the street prior (unless we work out special arrangements) and then do fine tuning on the dyno. There are a few people I've talked to and will talk more to about getting some fine tuning done specifically.

Lex I love you silly canuck.

I installed a new turbo. I suspect its the downpipe to turbo gasket.

Ahh! Good luck bro


Sent from my dizzLe using RaWr powers!

THREAD MOVED TO STRATIFIED

when will you find out a date?

I am going to be looking into the date closely after this weekend and will update with more specific information at that time as well.

Haven't been on here much since I've been traveling the last 2 weeks.

Sept 29 is mazfest... Bring lots of business cards to hand out lol

tapafuck

Damn, of course I'm going to be out of town :doh:

TMIC, AP, and internals on the way. Looking forward to doing some data logging and seeing what Lex can pull out of it

All the guys that will be fine tuning on the dyno we will need to start the tune on the street and get the car fairly dialed in before the dyno day. That will get the best results and save $$ in dyno time.

Sent from Stratified Mobile Headquarters

What part of socal? I want in! Need to get my bnr3 e85 tune dialed in...

It's going to be at churches automotive in long beach.

Due to the fast approaching Mazfest it looks like a good tentative date on my end is the first weekend of October - Oct 6-7 as a tentative date.

How does everyone feel about that?

Works for me. hopefully I can do a few pulls :)

Sounds good to me

tapafuck

I should be able to come out for a few hours.

Oct 6-7 sounds good!

That's gooD

Fuck Mazfest and MOCC

crappy I work. I'm sure I can take off the day... We will see

Alright, completely missed that Canadian Thanksgiving is that Oct 6-7 weekend. Looks like we will be pushing it back another week - Oct 13-14. I will probably be booking the flight this week and plan is to come in on Thu and probably fly out Mon.
@Daddy Chinkus is hunting down a shop for that weekend.

Excellent - thank you! - we should start the E-tune a few weeks before I come down so that the car is well dialed in before we get it on the dyno.

I have that weekend off! Is there an aditional fee for fine dyno tuning?

Aside from actual dyno shop fees which I have nothing to do with I don't charge anything more for Stratified customers wanting tweaks. I come out to help out as much as possible and have fun in the limited time available.

I'm still in! I'll start my etune with you most likely some time next week.

With this kind of service, its hard to pass up the opportunity. I will be signing up for an e-tune after I get some parts installed at the upcoming nator event.

Merging, threads, go to signup thread here:

http://www.mazdaspeedforums.org/foru...p-info-123233/