GI: Guardian Angel (Overboost Protection)

[DickFitzwell]

Looking forward to it! I'll check the store occasionally to see when they go up


Sent from my iPhone

[skeurton]

@Lex - I've got a buddy that wants one, too. So I added my name to the list a second time.

1. starscream
2. mtlms3
3. mrmonk7663
4. Gringo East
5. Sid3wayS
6. speed_freak91
7. ryno077
8. fooqr
9. obijack
10. Sleeperhatch
11. EL F00LI0
12.mroclimbr
13. MS3kid08
14. p057
15. Ckmazdaspeed3
16. blendedej8
17. JTMS3
18. Angr-E1
19. QwkEVO
20. skeurton
21. skeurton
22. Dizzydtrain
23. ScottyP
24. Novej

[p057]

Ahhhhh, the anticipation...!!!!

[Lex]

After much waiting, I should have quite a few units in hand before this weekend. I will post again here but check my site and there should be units available for sale by Monday!

[p057]

Originally Posted by Lex After much waiting, I should have quite a few units in hand before this weekend. I will post again here but check my site and there should be units available for sale by Monday!

Soooo, no reserves?

[Lex]

Originally Posted by p057 Soooo, no reserves?

It will be first come first serve. I have already started ordering parts for more units.

[SleeperHatch]

Originally Posted by Lex It will be first come first serve. I have already started ordering parts for more units.

Are you going down the list or no?

Sent from my Epic Win Avatar

[Lex]

I will mention everyone in the list and then it's up to them to purchase from my site. I can't babysit a list - if they want it they will buy it and I am ordering more to fill any shortages.

[Sid3wayS]

Order #129 i wants me my angel!

[bigriver]

This is great! You guys are gonna love the GA.

[Gringo East]

Out of stock already. Damn I was just about order. How long is the back order?

[skeurton]

Originally Posted by Gringo East Out of stock already. Damn I was just about order. How long is the back order?

7 posts above yours..........

Originally Posted by Lex After much waiting, I should have quite a few units in hand before this weekend. I will post again here but check my site and there should be units available for sale by Monday!

[Lex]

Thanks for the order! There are more coming next week.

[p057]

lol wtf i didnt even know they went on sale.... goddamn being distracted with future family-in-law visiting... taking away from my forum time!!!!

[Zbrit00x]

Ahh I missed it! Will get on this the second round! May have a bt for you to tune too pretty soon @Lex

[Lex]

Originally Posted by Zbrit00x Ahh I missed it! Will get on this the second round! May have a bt for you to tune too pretty soon @Lex

No worries, more will be posted this coming week.

Awesome news on the BT - looking forward to tuning it!

[Lex]

@starscream
@mtlms3
@mrmonk7663
@Gringo East
@Sid3wayS
@speed_freak91
@ryno077
@fooqr
@obijack
@SleeperHatch
@EL F00LI0
@mroclimbr
@MS3kid08
@p057
@Ckmazdaspeed3
@blendedej8
@JTMS3
@Angr-E1
@QwkEVO
@skeurton
@skeurton
@dizzydtrain
@ScottyP
@Novej
@Zbrit00x

12 GAs are available on my site. First come first serve

Guardian Angel Overboost Protection [GUARDIAN_ANGEL] - $179.00CAD : Stratified Automotive Controls

[dizzydtrain]

Order placed.

[skeurton]

Ordered 2 of them. Thanks!

[Geo13]

@skeurton: No THANK YOU!! Nothing better than a stealth purchase on mods the wife asked me to wait on!!

[aviator79]

Noticed the car bucking on the drive to work the other day. Looked down and I hit 22psi instantaniously. See an evo come next to me and I knew something was wrong. Couldnt go into boost at all or it woudl spike. Knew someting was wrong and had an idea what it was. My boost only line popped off from my boost control solonoid. Now had I not been paying attention of had a BT than it would have been bad. I got lucky. I like this idea, but cannot afford one. Maybe when I go BT I will grab one.

[Sid3wayS]

Already ordered n shipped. Order #129.
Question thou, the tracking number that was sent to me does not work thru the canadian mail. Have you shipped some out already or will you start shipping them now?

[Lex]

Originally Posted by aviator79 Noticed the car bucking on the drive to work the other day. Looked down and I hit 22psi instantaniously. See an evo come next to me and I knew something was wrong. Couldnt go into boost at all or it woudl spike. Knew someting was wrong and had an idea what it was. My boost only line popped off from my boost control solonoid. Now had I not been paying attention of had a BT than it would have been bad. I got lucky. I like this idea, but cannot afford one. Maybe when I go BT I will grab one.

This is the exact reason I developed the GA. Your stock MAP sensor only reads to 22psi, so if you were using the AP to look at this, it's likely that the actual boost spiked much higher. The boost cut in this car is a little slow.

Originally Posted by Sid3wayS Already ordered n shipped. Order #129. Question thou, the tracking number that was sent to me does not work thru the canadian mail. Have you shipped some out already or will you start shipping them now?

I shipped yours on Friday - I only send the tracking number once it's on its way and out of my hands. Unfortunately this is a limitation with the Canadian Mail system but the Expedited shipping is insured and should get there in 4-5 business days so expect it very soon.

[superskaterxes]

Originally Posted by Lex This is the exact reason I developed the GA. Your stock MAP sensor only reads to 22psi, so if you were using the AP to look at this, it's likely that the actual boost spiked much higher. The boost cut in this car is a little slow.

maby we can ask @David@COBB to find the tables that have the time scalar for how fast they react?

[JTMS3]

Order #137 Thanks again @Lex for the heads up!

[p057]

Originally Posted by Lex @p057 12 GAs are available on my site. First come first serve Guardian Angel Overboost Protection [GUARDIAN_ANGEL] - $179.00CAD : Stratified Automotive Controls

ordered.

[Zbrit00x]

Order #139! Thanks!

[DickFitzwell]

@Lex will you be bringing any of these babies down to the dyno day with you?


Sent from my iFail

[bigriver]

Guys - even expedited mail can take up to a week so dont worry. In the meantime you can go out and get tubing, add a circuit and find a nice spot to mount the GA. Oh, and swipe a wire hanger from a dry cleaner. Lol.

[Lex]

Originally Posted by DickFitzwell @Lex will you be bringing any of these babies down to the dyno day with you? Sent from my iFail

If you buy it, I can bring it down if you like. Otherwise I am not sure if there will be any left by the end of the month from this batch.

[Lex]

Thanks for all the orders so far! All the units bought this week are shipping out no later than Friday.

[ryno077]

Ordered

[Lex]

All units shipped to those who bought. Have 4 more ready to go.

[Sid3wayS]

Received, installed, and still in aww of how cool this thing is. Looks good, works great, and everything is nicely labled; this is truly idiot proof.

[Lex]

Originally Posted by Sid3wayS Received, installed, and still in aww of how cool this thing is. Looks good, works great, and everything is nicely labled; this is truly idiot proof.

Awesome to hear this and thanks! I assume you have tested it already and have set the trigger point?

[Sid3wayS]

Originally Posted by Lex Awesome to hear this and thanks! I assume you have tested it already and have set the trigger point?

Yep! Tested it at 10psi twice, just like you had described it's a smooth cut nothing violent at all. I then used the daddy chinkus method and dialed it in to where I wanted it. I mounted mine on top of the fuse panel and the wireing was dead on acurate, did'nt have to cut a single wire except to solder in the add-a-fuse. I got all fancy with mine and actualy mounted my LED in where the DSC button is, looks professional now lol.

[Lex]

I won't be able to ship for a few days starting with Wed. So if you'd like one of the 3 remaining ones get your order in today or early tomorrow.

[IMASA]

Just put in an order for one. Thanks Lex!

[Lex]

All units shipped. When you guys get these, let me know your impressions. I would love to see some reviews on my site (bottom left of the page):

http://www.stratifiedauto.com/index....roducts_id=217

If you write a review, I will send you a Stratified Tuned decal

[skeurton]

@Lex, should we have gotten a tracking number?