Mazdaspeed Forums

Mazdaspeed Forums (http://www.mazdaspeedforums.org/forum/)
-   MSF KB - Mazdaspeed 3/6 - Fuel (http://www.mazdaspeedforums.org/forum/f633/)
-   -   Map wire for meth injection (http://www.mazdaspeedforums.org/forum/f633/map-wire-meth-injection-125103/)

NJSPEED3 02-12-2011 06:22 PM

Map wire for meth injection
 
1 Attachment(s)
Here is a pdf for the map wire off the ecu for wmi.

Attachment 74283

NJSPEED3 02-12-2011 09:05 PM

I know the post is for the gen1 but its the same wire on the gen2's just different color.

7th wire from the top

rodrigo 02-12-2011 09:11 PM

no asshole....

2 ecu connectors...one close to firewall one closest to front bumper.

looking at the car standing in front of the front bumper look at the ecu connector closest....now look at the wire at the bottom left..... and count 7 wires up on the left most column...the 7th is the MAP wire

http://i1202.photobucket.com/albums/...ny127/meth.jpg

NJSPEED3 02-12-2011 09:31 PM

stfu lenny I posted the instructions from Devil's Own on how to find the map wire.

rodrigo 02-12-2011 09:48 PM

u said from the top.........its from the bottom

bottom is the front bumper. top is the firewall.

go drink some more.....ive done enough of these kits to do them blindfolded.

BeeZaa 02-13-2011 12:45 AM

I appreciate both of your help in getting me set up. I used lenny's advice and the nigga knows his shit. I had taken the car out shortly after and everything worked perfect.

On a gen2 the wire color is "RED" for map, just remember the bottom ecu connector looking from the bumper. Now look at the bottom left wire and count 7 up, tap it.

Monotonous ONE 02-13-2011 03:10 AM

maybe you should post more information about your setup...cause maybe other gen2ers want to know


and stuff


cunt

MS3-a(sore)ASS-rex 02-13-2011 06:48 AM

Fuck the MAP, the MAF signal wire is so much easier to find.
FYMWN

rodrigo 02-13-2011 01:27 PM

Quote:

Originally Posted by BeeZaa (Post 728538)
I appreciate both of your help in getting me set up. I used lenny's advice and the nigga knows his shit. I had taken the car out shortly after and everything worked perfect.

On a gen2 the wire color is "RED" for map, just remember the bottom ecu connector looking from the bumper. Now look at the bottom left wire and count 7 up, tap it.

gerry did u read this?? he followed MY advice hahahahahah

fyan

DevilsOwn 03-03-2011 10:38 AM

Where is the map sensor on the motor?

speed23 03-03-2011 11:24 AM

Quote:

Originally Posted by DevilsOwn (Post 752850)
Where is the map sensor on the motor?

On the passenger side of the intake manifold

DevilsOwn 03-07-2011 12:54 PM

got a pic? :) sorry i am beign lazy and i don't have one i can just walk out and look.

NJSPEED3 03-07-2011 01:09 PM

Just read it now Lenny, Glad it was resolved that pdf is still helpful though.

speed23 03-07-2011 04:06 PM

1 Attachment(s)
Quote:

Originally Posted by DevilsOwn (Post 758366)
got a pic? :) sorry i am beign lazy and i don't have one i can just walk out and look.

Here's one ssinstaller took for me a while back.....

DevilsOwn 03-09-2011 11:26 AM

Well thats not to hard to get to is it?

Abilor 06-04-2011 01:20 PM

Quote:

Originally Posted by rodrigo (Post 728405)
no asshole....

2 ecu connectors...one close to firewall one closest to front bumper.

looking at the car standing in front of the front bumper look at the ecu connector closest....now look at the wire at the bottom left..... and count 7 wires up on the left most column...the 7th is the MAP wire

http://i1202.photobucket.com/albums/...ny127/meth.jpg

Thank god Rodrigo posted this. The directions for Mazdaspeed 3 on the DO site are both shitty and completely inaccurate. I sure as hell wish they'd update their site.

This post saved my install...

manelscout4life 08-24-2011 07:09 AM

So, which wire is it?

You guys say 7th from the bottom but the one thats tapped in that photo is not the 7th

dooderek 08-24-2011 07:20 AM

moar meth

Abilor 08-24-2011 11:29 AM

Quote:

Originally Posted by manelscout4life (Post 1007311)
So, which wire is it?

You guys say 7th from the bottom but the one thats tapped in that photo is not the 7th

7th do it

dantes5823 04-19-2012 11:05 AM

Well fuck i should have gotten this controller. My dvc-30 does whatever the fuck it wants to. This one uses a boost source vs a signal wire.

EDIT: NVM im gonna rewire mine.

Erich 09-19-2012 01:07 PM

Discuss here:
http://www.mazdaspeedforums.org/foru...jection-72237/


All times are GMT -7. The time now is 09:01 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
SEO by vBSEO ©2011, Crawlability, Inc.
vB.Sponsors

©Copyright 2008 ; 2019 Cymru Internet Services LLC | FYHN™ Autosports HQ
Ad Management plugin by RedTyger

Page generated in 0.18895 seconds with 11 queries