![]() | ![]() |
![]() | ![]() | ![]() | ![]() | ![]() | ![]() |
|
| |||||||
| MazdaSpeed 3/6 - Fuel, Nitrous & Water Injection MazdaSpeed 3/6 - Fuel, Nitrous & Water Injection Have a CDFP fuel pump question? Do you want to add Nitrous or Water Injection to your Mazdaspeed 3/6 ? Please come on in! |
![]() |
![]() | | LinkBack | Thread Tools | Display Modes | ![]() |
![]() | | #1 | ![]() |
| pwerslave,ms3ica,s3type2 | When i first tested the pressure switch to the meth controller nothing happend? then it worked maybe thats why i had a crappy data log before. This is at 18.5psi with only .3 on knock (before3.5) but pretty lean but its getting cold too. Opinions Please! also on the freeway boosting my boost temps got to 65 dgrees never seen that before..
__________________ no resiantors, ms cia, turboxs rfl vta, standback set to 20psi(meth) , autometer boostguage,3.5 ETS tmic. test pipe, corksport inserts, Devilsown meth injection, Extrudehoned speed6 cold pipe SOON to come CP-E FLASH & CP-E Meth Controller, CPFP ,Denso plugs step 2 colder!!! ![]() ![]() ![]() http://www.myspace.com/joespeed3 |
| | |
![]() | | #2 | ![]() |
| pwerslave,ms3ica,s3type2 | bump for opinions..
__________________ no resiantors, ms cia, turboxs rfl vta, standback set to 20psi(meth) , autometer boostguage,3.5 ETS tmic. test pipe, corksport inserts, Devilsown meth injection, Extrudehoned speed6 cold pipe SOON to come CP-E FLASH & CP-E Meth Controller, CPFP ,Denso plugs step 2 colder!!! ![]() ![]() ![]() http://www.myspace.com/joespeed3 |
| | |
![]() | | #3 | ![]() |
![]() | | #4 | ![]() |
| pwerslave,ms3ica,s3type2 | Na bro I didn't mess with tune..
__________________ no resiantors, ms cia, turboxs rfl vta, standback set to 20psi(meth) , autometer boostguage,3.5 ETS tmic. test pipe, corksport inserts, Devilsown meth injection, Extrudehoned speed6 cold pipe SOON to come CP-E FLASH & CP-E Meth Controller, CPFP ,Denso plugs step 2 colder!!! ![]() ![]() ![]() http://www.myspace.com/joespeed3 |
| | |
![]() | | #5 | ![]() |
![]() | | #6 | ![]() |
| pwerslave,ms3ica,s3type2 | nope. but this pull looks prettyy good i think the mid 12's afrs are from the cold. I suspect the switch wasn't working before i it with 30psi of air pressue.. and thats why my prevous data log earleier today sucked.
__________________ no resiantors, ms cia, turboxs rfl vta, standback set to 20psi(meth) , autometer boostguage,3.5 ETS tmic. test pipe, corksport inserts, Devilsown meth injection, Extrudehoned speed6 cold pipe SOON to come CP-E FLASH & CP-E Meth Controller, CPFP ,Denso plugs step 2 colder!!! ![]() ![]() ![]() http://www.myspace.com/joespeed3 |
| | |
![]() | | #8 | ![]() |
| pwerslave,ms3ica,s3type2 | Chris are your boost temp consistantly in the 60-70? my boost temps got in the 60's but only on the highway and its 65degrees out. this datalog looks pretty much same as other data log but leaner. I tested the system and it working so i don't get it?
__________________ no resiantors, ms cia, turboxs rfl vta, standback set to 20psi(meth) , autometer boostguage,3.5 ETS tmic. test pipe, corksport inserts, Devilsown meth injection, Extrudehoned speed6 cold pipe SOON to come CP-E FLASH & CP-E Meth Controller, CPFP ,Denso plugs step 2 colder!!! ![]() ![]() ![]() http://www.myspace.com/joespeed3 |
| | |
![]() | | #9 | ![]() |
| Banned | your not spraying meth. if its 60 out my crusing temps are in the 90s...the second i floor it and the meth spray, the quickly drop down to ambiant, or a couple degrees above it |
| | |
![]() | | #10 | ![]() |
| pwerslave,ms3ica,s3type2 | damm wtf? i tested the system with a air compressor last night i looked through the bov whole and mists... wtf?
__________________ no resiantors, ms cia, turboxs rfl vta, standback set to 20psi(meth) , autometer boostguage,3.5 ETS tmic. test pipe, corksport inserts, Devilsown meth injection, Extrudehoned speed6 cold pipe SOON to come CP-E FLASH & CP-E Meth Controller, CPFP ,Denso plugs step 2 colder!!! ![]() ![]() ![]() http://www.myspace.com/joespeed3 |