| |
 |  |  |  |  |  |
 |
| |||||||
| MazdaSpeed 3/6 - Turbo Induction MazdaSpeed 3/6 - Turbo Induction - Have a turbo, intercooler, downpipe question? Anything turbo related belongs here! |
 |
 | | LinkBack | Thread Tools | Display Modes |  |
 | 
10-08-2008, 07:38 AM
| #1 |  |
| pwerslave,ms3ica,s3type2  |  turbo effeiciancy = boost temp? Hey just wondering, theres alot of opinions on our turbo max effeciancy. Would one way to measure if your running to much boost is to see on the dh that your boost temps seem abnomally high?
__________________  no resiantors, ms cia, turboxs rfl vta, standback set to 20psi(meth) , autometer boostguage,3.5 ETS tmic. test pipe, corksport inserts, Devilsown meth injection, Extrudehoned speed6 cold pipe SOON to come CP-E FLASH & CP-E Meth Controller, CPFP ,Denso plugs step 2 colder!!!      http://www.myspace.com/joespeed3 |
|   |
|
10-08-2008, 07:39 AM
| #2 | |
| Faster then that guy ^^^^  Join Date: Mar 2008 Location: Central NJ
Posts: 1,139
iTrader: (0)
Rep Power: 86   
Thanks: 159
Thanked 144 Times in 73 Posts
Groans: 8
Groaned at 7 Times in 6 Posts
 | in short yes, but u have to know where to draw the line.
__________________ 2006 Mazdaspeed 6 GT Black Mica 1G DSM BOV ~ CPE Xcel CAI w/Injen Hydroshield ~ AP ~ CPE FCF (stock map) ~ Custom Side-to-Side FMIC ~ Corksport Downpipe (Heat Wrapped) ~ DNP Mani ~ Custom Turbo Inlet Pipe ~ TWM Stage 1 SS ~ CPE MM ~ H&R's ~ SPC BJ's ~ Autometer Boost Gauge w/ Custom Built Vent Pod ~ Dashhawk ~ Whiteline RSB ~ CDFP Internals ~ CPE RDM ~ Custom STB ~ Magnaflow CBE ~ Custom Test Pipe ~ labonte meth kit ~ CC ~ DMH Electronic Cutout (Soon to be Microprocessor Controlled) ~ 13.4 @ 99  | ||||||||
| |
| The Following User Says Thank You to superskaterxes For This Useful Post: | gsrtype1 (10-08-2008) |
|
10-08-2008, 07:43 AM
| #3 | |
| pwerslave,ms3ica,s3type2 | So im running 18 psi, not over stressing the turbo? boost temps seem perfectly normal and the temp drops when i'm on boost. i got the ets tmic wich is supposed to hold boost better wich would mean higher boost with out stressing the turbo
__________________ no resiantors, ms cia, turboxs rfl vta, standback set to 20psi(meth), autometer boostguage,3.5 ETS tmic. test pipe, corksport inserts, Devilsown meth injection, Extrudehoned speed6 cold pipe SOON to come CP-E FLASH & CP-E Meth Controller, CPFP ,Denso plugs step 2 colder!!! http://www.myspace.com/joespeed3 |
|
| |
|
10-08-2008, 07:47 AM
| #4 | |
| Faster then that guy ^^^^ Join Date: Mar 2008 Location: Central NJ
Posts: 1,139
iTrader: (0)
Rep Power: 86
Thanks: 159
Thanked 144 Times in 73 Posts
Groans: 8
Groaned at 7 Times in 6 Posts
| 18 is about the max line for running out of efficiency on this turbo.....
__________________ 2006 Mazdaspeed 6 GT Black Mica 1G DSM BOV ~ CPE Xcel CAI w/Injen Hydroshield ~ AP ~ CPE FCF (stock map) ~ Custom Side-to-Side FMIC ~ Corksport Downpipe (Heat Wrapped) ~ DNP Mani ~ Custom Turbo Inlet Pipe ~ TWM Stage 1 SS ~ CPE MM ~ H&R's ~ SPC BJ's ~ Autometer Boost Gauge w/ Custom Built Vent Pod ~ Dashhawk ~ Whiteline RSB ~ CDFP Internals ~ CPE RDM ~ Custom STB ~ Magnaflow CBE ~ Custom Test Pipe ~ labonte meth kit ~ CC ~ DMH Electronic Cutout (Soon to be Microprocessor Controlled) ~ 13.4 @ 99 | ||||||||
|
| |
|
10-08-2008, 07:49 AM
| #5 | |
| pwerslave,ms3ica,s3type2 | thanks for the info, there so many different opinions..soime say our turbo is effeicant to 20+ psi? Our turbo is tiny so it would seem 18psi would be pushing it pretty good
__________________ no resiantors, ms cia, turboxs rfl vta, standback set to 20psi(meth), autometer boostguage,3.5 ETS tmic. test pipe, corksport inserts, Devilsown meth injection, Extrudehoned speed6 cold pipe SOON to come CP-E FLASH & CP-E Meth Controller, CPFP ,Denso plugs step 2 colder!!! http://www.myspace.com/joespeed3 |
|
| |
|
10-08-2008, 07:50 AM
| #6 | |
| Faster then that guy ^^^^ Join Date: Mar 2008 Location: Central NJ
Posts: 1,139
iTrader: (0)
Rep Power: 86
Thanks: 159
Thanked 144 Times in 73 Posts
Groans: 8
Groaned at 7 Times in 6 Posts
| u can run 20 on meth......
__________________ 2006 Mazdaspeed 6 GT Black Mica 1G DSM BOV ~ CPE Xcel CAI w/Injen Hydroshield ~ AP ~ CPE FCF (stock map) ~ Custom Side-to-Side FMIC ~ Corksport Downpipe (Heat Wrapped) ~ DNP Mani ~ Custom Turbo Inlet Pipe ~ TWM Stage 1 SS ~ CPE MM ~ H&R's ~ SPC BJ's ~ Autometer Boost Gauge w/ Custom Built Vent Pod ~ Dashhawk ~ Whiteline RSB ~ CDFP Internals ~ CPE RDM ~ Custom STB ~ Magnaflow CBE ~ Custom Test Pipe ~ labonte meth kit ~ CC ~ DMH Electronic Cutout (Soon to be Microprocessor Controlled) ~ 13.4 @ 99 | ||||||||
|
| |
|
10-08-2008, 07:53 AM
| #7 | |
| pwerslave,ms3ica,s3type2 | i think darksun said he saw benifits up to 24psi on meth? and driver 311 said one time he read an article that our turbo was good for 23psi? its so tiny though thats hard to beleive..
__________________ no resiantors, ms cia, turboxs rfl vta, standback set to 20psi(meth), autometer boostguage,3.5 ETS tmic. test pipe, corksport inserts, Devilsown meth injection, Extrudehoned speed6 cold pipe SOON to come CP-E FLASH & CP-E Meth Controller, CPFP ,Denso plugs step 2 colder!!! http://www.myspace.com/joespeed3 |
|
| |
|
10-08-2008, 07:59 AM
| #8 | |
| Senior Member  Join Date: Jun 2008
Posts: 886
iTrader: (0)
Rep Power: 28 Thanks: 58
Thanked 41 Times in 37 Posts
Groans: 1
Groaned at 14 Times in 11 Posts
| some skimatics show the max eff of our turbo is 20 psi.
__________________  Speed3, currently under construction. Cx7 soon.... Cp-e Dual cat back and Cp-e Flash. The Speeds you never seen coming | ||||||||
|
| |
| The Following User Says Thank You to Buildabong For This Useful Post: | gsrtype1 (10-08-2008) |
|
10-08-2008, 08:05 AM
| #9 | |
| pwerslave,ms3ica,s3type2 | yeah i think driver 311 had a article from the maker of the tubo.. so many opinions its like how do you know for sure?
__________________ no resiantors, ms cia, turboxs rfl vta, standback set to 20psi(meth), autometer boostguage,3.5 ETS tmic. test pipe, corksport inserts, Devilsown meth injection, Extrudehoned speed6 cold pipe SOON to come CP-E FLASH & CP-E Meth Controller, CPFP ,Denso plugs step 2 colder!!! http://www.myspace.com/joespeed3 |
|
| |
|
10-08-2008, 08:08 AM
| #10 | |
| Senior Member Join Date: Jun 2008
Posts: 886
iTrader: (0)
Rep Power: 28 Thanks: 58
Thanked 41 Times in 37 Posts
Groans: 1
Groaned at 14 Times in 11 Posts
| just on the safe side run 17-18psi. I turned mine to 19psi then my stutter started and won't stop now hahaha
__________________ Speed3, currently under construction. Cx7 soon.... Cp-e Dual cat back and Cp-e Flash. The Speeds you never seen coming | ||||||||
|
| |
|
10-08-2008, 08:16 AM
| #11 | |
